door lock MAZDA MODEL CX-5 2017 Owners Manual (in English)

1–2
Pictorial Index
Interior Overview
Interior Equipment (View A)





Lighting control........................................................\
............................................. page 4-51



Turn and lane-change signal ........................................................................\
......... page 4-57



Audio control switches..................................................\
........................................ page 5-15



INFO switch ........................................................................\
.........................page 4-17 , 4-20



Cruise control switches ........................................................................\
....page 4-126 , 4-167



Wiper and washer lever ........................................................................\
................. page 4-58



TCS OFF Switch ........................................................................\
........................... page 4-84



Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) OFF switch ..................................... page 4-144



Power liftgate switch ........................................................................\
..................... page 3-24



Headlight leveling switch...............................................\
....................................... page 4-56



Outside mirror switch...................................................\
......................................... page 3-36



Door-lock switch ........................................................................\
........................... page 3-17



Power window switches ........................................................................\
................ page 3-39



Power window lock switch ........................................................................\
........... page 3-41



Door-lock knob ........................................................................\
............................. page 3-20
The equipment and installation position varies by vehicle
CX-5_8FN1-EA-16L_Edition1.indb 22016/12/12 10:05:10

1–5
Pictorial Index
Interior Overview





Seat belts ..................................................................\
............................................. page 2-20



Lever ........................................................................\
....................................page 2-10 , 2-15



Head restraint ........................................................................\
................................ page 2-17



USB power outlet ........................................................................\
........................ page 5-142



Child safety locks ........................................................................\
.......................... page 3-21



Armrest box.............................................................\
............................................ page 5-146



Seat warmer switches ........................................................................\
.................... page 2-15



Cup holder ........................................................................\
................................... page 5-143



Rear coat hooks ........................................................................\
........................... page 5-147



Rear map lights ........................................................................\
........................... page 5-139



Door-lock knob ........................................................................\
............................. page 3-20



Center console ........................................................................\
............................. page 5-145



External input terminal.................................................\
......................................... page 5-16



Accessory socket ........................................................................\
......................... page 5-141



Power window switch ........................................................................\
................... page 3-39



Bottle holder ........................................................................\
................................ page 5-144



Armrest................................................................\
.................................................. page 2-17



Rear seat ........................................................................\
........................................ page 2-10



LATCH lower anchors ........................................................................\
.................. page 2-42
The equipment and installation position varies by vehicle
CX-5_8FN1-EA-16L_Edition1.indb 52016/12/12 10:05:12

2–9
Essential Safety Equipment
Seats
Programming
1. Make sure the parking brake is on.
2. (Automatic transaxle)
Make sure the selector lever is in the P position.
3. Start the engine.
4. Adjust the seat and the active driving display to the desired driving position.
5. Press the SET button on the seat until a beep sound is heard one time.
6. Perform one of the following settings within 5 seconds of completing step 5
above:
 Programming using a button on
the side of the seat
 Press the button you want to program,
either button 1 or 2, until a beep
sound is heard one time.
 Programming using the key  Press the key button until a beep
sound is heard one time.

NOTE
If a beep sound is heard three times, the
operation is canceled.

To move the driving position to a
programmed position
(Using a button on the side of the seat)
1. Make sure the parking brake is on.
2. (Automatic transaxle)
Make sure the selector lever is in the P position.
3. Start the engine.
4. Press the programming button for the driving position you want to call up
(button 1 or 2).
5. A beep sound is heard when the driving position adjustment is completed.

NOTE
  If the driving position movement is not
changed, only the beep sounds.
  A seat position can be called up even
with the engine not running.
  The driving position adjustment is
canceled in the following cases:
  Any of the seat adjustment switches
is operated.
  The SET button is pressed.  Programming button 1 or 2 is
pressed.
  The key button or button is
operated.
   The vehicle starts moving.  The active driving display is
adjusted.


(Using a programmed key)
1. Unlock the doors by pressing a request
switch or the key
button.
2. After unlocking the doors, the seat position adjustment begins within
40 seconds of opening the driver's door,
and a beep sounds when the operation
is fi nished.
3. Make sure the parking brake is on.
4. (Automatic transaxle)
Make sure the selector lever is in the P position.
5. Start the engine.
6. The active driving display adjustment begins.

CX-5_8FN1-EA-16L_Edition1.indb 92016/12/12 10:05:16

2–32
Essential Safety Equipment
Child Restraint
Do not allow a child or anyone to lean over or against the side window of a vehicle with
side and curtain air bags: It is dangerous to allow anyone to lean over or against the side window, the area of the
front passenger seat, the front and rear window pillars and the roof edge along both
sides from which the side and curtain air bags deploy, even if a child-restraint system
is used. The impact of infl ation from a side or curtain air bag could cause serious injury
or death to an out of position child. Furthermore, leaning over or against the front door
could block the side and curtain air bags and eliminate the advantages of supplemental
protection. With the front air bag and the additional side air bag that comes out of the
front seat, the rear seat is always a better location for children. Take special care not to
allow a child to lean over or against the side window, even if the child is seated in a child-
restraint system.

Never use one seat belt on more than one person at a time: Using one seat belt for more than one person at a time is dangerous. A seat belt used
in this way cannot spread the impact forces properly and the two passengers could
be crushed together and seriously injured or even killed. Never use one belt for more
than one person at a time and always operate the vehicle with each occupant properly
restrained.

Always remove the child-restraint syst em from the rear seat before operating the
remote handle for the rear seat: Operating the remote handle while a rear-facing child-restraint system is in the rear seat
is dangerous. It could cause injury to a child seated in the child-restraint system when the
seatback suddenly fl ips forward.

CAUTION
A seat belt or child-restraint system can become very hot in a closed vehicle during warm
weather. To avoid burning yourself or a child, check them before you or your child touches
them.

NOTE
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed
LATCH child-restraint systems in the rear seats. When using these anchors to secure a
child-restraint system, refer to "Using LATCH Lower Anchor" (page 2-42 ).

CX-5_8FN1-EA-16L_Edition1.indb 322016/12/12 10:05:20

2–39
Essential Safety Equipment
Child Restraint
Do not allow a child or anyone to lean
over or against the side window of a
vehicle with side and curtain air bags: It is dangerous to allow anyone to lean
over or against the side window, the
area of the front passenger seat, the
front and rear window pillars and the
roof edge along both sides from which
the side and curtain air bags deploy,
even if a child-restraint system is used.
The impact of infl ation from a side or
curtain air bag could cause serious
injury or death to an out of position
child. Furthermore, leaning over or
against the front door could block the
side and curtain air bags and eliminate
the advantages of supplemental
protection. With the front air bag and
the additional side air bag that comes
out of the front seat, the rear seat is
always a better location for children.
Take special care not to allow a child to
lean over or against the side window,
even if the child is seated in a child-
restraint system.

Always remove the head restraint and
install child-restraint system (except
when installing a backless booster
seat): Installing a child-restraint system
without removing the head restraint is
dangerous. The child-restraint system
cannot be installed correctly which
may result in death or injury to the
child in a collision.
Always install the head restraint and
adjust it to the appropriate position
after removing the child-restraint
system: Driving with the head restraint
removed is dangerous as impact to the
occupant's head cannot be prevented
during emergency braking or in a
collision, which could result in a serious
accident, injury or death.
Refer to Head Restraints on page
2-17 .

Front Passenger's Seat Child-Restraint
System Installation (With Front
Passenger Occupant Classifi cation
System)
1. Make sure the ignition is switched off.
2. Slide the seat as far back as possible.


3. Remove the head restraint. However, when installing a backless booster seat,
always install the vehicle head restraint
to the seat where the backless booster
seat is installed.
4. Place the child-restraint system on the seat without putting your weight on
the seat and fasten the seat belt. See
the manufacturer's instructions on the
child-restraint system for belt routing
instructions.
CX-5_8FN1-EA-16L_Edition1.indb 392016/12/12 10:05:22

3–1*Some models.
3Before Driving
Use of various features, including keys, doors, mirrors and windows.

Keys ...................................................... 3-2 Keys ............................................... 3-2
Keyless Entry System .................... 3-3

Advanced Keyless Entry System ..... 3-10 Advanced Keyless Entry
System
* ......................................... 3-10
Operational Range ....................... 3-11

Doors and Locks ................................ 3-12 Door Locks ................................... 3-12
Liftgate ......................................... 3-22

Fuel and Emission ............................. 3-30 Fuel and Engine Exhaust
Precautions ................................... 3-30
Fuel-Filler Lid and Cap ................ 3-33

Steering Wheel................................... 3-35 Steering Wheel ............................. 3-35

Mirrors ............................................... 3-36 Mirrors ......................................... 3-36

Windows ............................................. 3-39 Power Windows ........................... 3-39
Moonroof
* ................................... 3-42

Security System ................................. 3-45 Modifi cation and Add-On
Equipment .................................... 3-45
Immobilizer System ..................... 3-45
Theft-Deterrent System
* ............... 3-47
Driving Tips ....................................... 3-49 Break-In Period ............................ 3-49
Saving Fuel and Protection of the
Environment ................................. 3-49
Hazardous Driving ....................... 3-50
Floor Mat ..................................... 3-51
Rocking the Vehicle ..................... 3-51
Winter Driving ............................. 3-52
Driving In Flooded Area .............. 3-53
Overloading .................................. 3-54
Driving on Uneven Road ............. 3-55

Towing ................................................ 3-56 Trailer Towing
(U.S.A. and Canada) .................... 3-56
Recreational Towing .................... 3-64
CX-5_8FN1-EA-16L_Edition1.indb 12016/12/12 10:05:28

3–3
Before Driving
Keys
A code number is stamped on the plate
attached to the key set; detach this plate
and store it in a safe place (not in the
vehicle) for use if you need to make a
replacement key (auxiliary key).
Also write down the code number and
keep it in a separate safe and convenient
place, but not in the vehicle.

If your key (auxiliary key) is lost, consult
your Authorized Mazda Dealer and have
your code number ready.
NOTE
The driver must carry the key to ensure the
system functions properly.


Auxiliary key
Transmitter
Key code number plate

To use the auxiliary key, pull out the
auxiliary key from the transmitter while
pressing the knob.

Knob

Keyless Entry System
This system uses the key buttons to
remotely lock and unlock the doors and
the liftgate, and opens/closes the liftgate.
The system can start the engine without
having to take the key out of your purse or
pocket.
It can also help you signal for attention or
help.
Operating the theft-deterrent system is
also possible on theft-deterrent system-
equipped vehicles.

System malfunctions or warnings are
indicated by the following warning lights
or beeps.
For vehicles with the type A instrument
cluster, check the displayed message for
more information and, if necessary, have
the vehicle inspected at an Authorized
Mazda Dealer, according to the indication.
  KEY Warning Light (Red) Refer to Warning/Indicator Lights on
page 4-32 .
  Ignition Not Switched Off (STOP)
Warning Beep
 Refer to Ignition Not Switched Off (STOP) Warning Beep on page 7-40 .
  Key Removed from Vehicle Warning
Beep
 Refer to Key Removed from Vehicle Warning Beep on page 7-41 .

If you have a problem with the key,
consult an Authorized Mazda Dealer.

If your key is lost or stolen, consult an
Authorized Mazda Dealer as soon as
possible for a replacement and to make the
lost or stolen key inoperative.
CX-5_8FN1-EA-16L_Edition1.indb 32016/12/12 10:05:28

3–4
Before Driving
Keys
CAUTION
Radio equipment like this is governed
by laws in the United States.
Changes or modifi cations not expressly
approved by the party responsible
for compliance could void the user's
authority to operate the equipment.

NOTE
  The keyless entry system operation may
vary due to local conditions.
  The keyless entry system is fully
operational (door/liftgate lock/unlock)
when the ignition is switched off. The
system does not operate if the ignition is
switched to any position other than off.
  If the key does not operate when
pressing a button or the operational
range becomes too small, the battery
may be weak. To install a new battery,
refer to Key Battery Replacement (page
6-36 ).
  Battery life is about one year. Replace
the battery with a new one if the KEY
indicator light (green) fl ashes in the
instrument cluster (for vehicles with
a type A instrument cluster (page
4-32 ), messages are displayed in
the instrument cluster). Replacing
the battery about once a year is
recommended because the KEY warning
light/indicator light may not illuminate
or fl ash depending on the rate of battery
depletion.

  Additional keys can be obtained at
an Authorized Mazda Dealer. Up to
6 keys can be used with the keyless
functions per vehicle. Bring all keys
to an Authorized Mazda Dealer when
additional keys are required.

CX-5_8FN1-EA-16L_Edition1.indb 42016/12/12 10:05:28

3–5
Before Driving
Keys
Transmitter

Operation buttons
Operation indicator light

NOTE
 
 The headlights turn on/off by operating
the transmitter. Refer to Leaving Home
Light on page 4-55 .
  (With theft-deterrent system)  The hazard warning lights fl ash when
the theft-deterrent system is armed or
turned off.
 Refer to Theft-Deterrent System on page 3-47 .
  (With the advanced keyless function)  A beep sound can be heard for
confi rmation when the doors and the
liftgate are locked/unlocked using the
key. If you prefer, the beep sound can be
turned off.
 The volume of the beep sound can also be changed.
 Refer to Personalization Features on page 9-11 .

Use the following procedure to change the
setting.

1. Switch the ignition off and close all of the doors and the liftgate.
2. Open the driver's door.
3. Within 30 seconds of opening the driver's door, press and hold the
LOCK button on the key for
5 seconds or longer.
All of the doors and the liftgate lock and the beep sound activates at the
currently set volume. The setting
changes each time the LOCK button
on the key is pressed and the beep
sound activates at the set volume. (If
the beep sound has been set to not
activate, it will not activate.)
4. The setting change is completed by doing any one of the following:
  Switching the ignition to ACC or
ON.
  Closing the driver's door.  Opening the liftgate.  Not operating the key for
10 seconds.
  Pressing any button except the
LOCK button on the key.
  Pressing a request switch.

The operation indicator light fl ashes when
the buttons are pressed.
CX-5_8FN1-EA-16L_Edition1.indb 52016/12/12 10:05:29

3–6
Before Driving
Keys
Lock button
To lock the doors and the liftgate, press the
lock button and the hazard warning lights
will fl ash once.
(With the advanced keyless function)
A beep sound will be heard once.

To confi rm that all doors and the liftgate
have been locked, press the lock button
again within 5 seconds. If they are closed
and locked, the horn will sound.


NOTE
  The doors and the liftgate can be locked
by pressing the lock button while any
other door or the liftgate is open. The
hazard warning lights will not fl ash.
 When the lock button is pressed while
any door is open and then the door is
closed, all the doors and the liftgate are
locked.
  Confi rm that all doors and the liftgate
are locked visually or audibly by use of
the double click.
   Make sure all doors and the liftgate are
locked after pressing the button.
  (With theft-deterrent system)  When the doors are locked by pressing
the lock button on the key while the
theft-deterrent system is armed, the
hazard warning lights will fl ash once to
indicate that the system is armed.

Unlock button
To unlock the driver's door, press the
unlock button and the hazard warning
lights will fl ash twice.
(With the advanced keyless function)
A beep sound will be heard twice.

To unlock all doors and the liftgate, press
the unlock button again within 3 seconds
and two more beep sounds will be heard.


CX-5_8FN1-EA-16L_Edition1.indb 62016/12/12 10:05:29