height adjustment MAZDA MX-5 1994 User Guide

CRUISE CONTROL SYSTEM T BRAKE AND STOPLIGHT SWITCH CLUTCH SWITCH Removal Loosen the locknut and remove the switch. Installation Install in the reverse order of removal. Adjustment Adjust the switch to set the specified pedal height. Pedal height: 175--185mm (6.89-7.82 in) Pedal free play: 0.6-3.lmm (0.02-4.12 in) Inspection 1. Disconnect the clutch switch connector. 2. Check for continuity between terminals of the switch. Pedal position Terminal A B 1 0-a: Continuity Pedal released 3. If not as specified, replace the clutch switch. Pedal de~ressed STOP LIGHTIBRAKE SWITCH Removal Loosen the locknut and remove the switch. 0 I 0 Installation Install in the reverse order of removal. Adjustment Adjust the switch to set the specified pedal height. Pedal height: l7l-l8l mm (6.93--7.13 in) Pedal free play: 4.0-7.0mm (0.16-0.28 in) Inspection 1. Disconnect the brake switch connector. 2. Check for continuity between terminals of the switch. I I I Pedal released I I I Pedal position w: Continuity Terminal Pedal depressed 3. If not as specified, replace the brake switch. 4. If the switch is OK, repair the wiring harness (fuse - brake switch - control unit). A 0 I 0 B Gartner Banana

ST SPECIAL TOOLS DIFFERENTIAL rooL NUMBER a DESCRIPTION PRIORITY TOOL NUMBER~ DESCRIPTION PRIORITY ILLUSTRATION 49 F027 005 Attachment @62 Hanger, differential carrier Collar Adjustment wrench, side bearing 49 8531 565 Pinion model 49 GO30 338 Attachment E 49 F027 004 Attachment @80 Gauge body, pinion height 49 BOO1 795 Installer, oil seal 49 0305 555 Sauge block 49 U027 003 Installer, oil seal nstaller, rubber wshing Holder, coupling ilange Gartner Banana