navigation MERCEDES-BENZ C-Class 2003 W203 Comand Manual

145 Navigation
Route guidance
Function
Page
1
Name of the street onto
which you should turn orDistance to destination orName of the route
(e.g. I-695) and direction
of travel to follow (e.g.
North)
154
155
155
2
Arrow indicating driving
direction or

Destination direction


Symbol for new cal-
culation of the route


Destination flag
154
168
170
3
Name of the street on
which you are travelling
149
4
Other display types

Distance bar to the
next maneuver


Distance to the next
maneuver in miles
154
155


“OFF MAP” - vehicle
is located outside of
the digitized map
area


“OFF ROAD” - vehicle
is located on a road
which is not digitized


“DEST AREA” - vehic-
le is approaching the
destination, the des-
tination area is not di-
gitized


“CALC. ROUTE” - a
route is being calcu-
lated
143


“NEW ROUTE” - an
existing route is
being recalculated


“NO ROUTE” - the
COMAND is unable
to calculate a route
170
Function
Page
5
Activating the map
Route guidance is active:
You can also press l.
156
6
Marking a way point
160
7
Mixture of map and sym-
bol display
157
8
Activating the symbol
display
Route guidance is active:
You can also press l.
156
9
Selecting
map orientation
159
10
Current map scale
158
11
Current vehicle location
with route (blue line)
151
12
Destination flagFunction
Page

146 NavigationRoute guidanceAfter the destination is selected and the
route is calculated, the navigation system
will guide you to the destination using both
pictorial displays and voice outputs.
During route guidance, you can select the
following 3 screen displays:

Symbol display
Always appears after a route has been
calculated


Map display
Activate the map with menu field 5,
switch back to symbol display with
menu field 8


Mix
Before the vehicle makes a turn,
COMAND switches automatically from
the map to the symbol display.
Once the turn has been completed, the
map is displayed again.
iIn the map display, menu fields 6, 8, 9
are removed after 6 seconds.
Turn the right-hand rotary/push-button
v to display the menu fields again.
iThe map appears automatically after 5
seconds if the vehicle is located on a
road which is not digitized (message
OFF ROAD).
If COMAND recognizes a stored road,
the symbol display is called up again.

147 Navigation
Route guidance
Once you have calculated the route, you
can request destination and route informa-
tion.
Press ..
The selection menu “Destination Info”
will appear.
“Destination Info” selection menu 1Estimated time of arrival at destination
2Current distance to destination
3Display route list
4Display location map
5Display current destination
6Request route mode
7Activate route map
8Display stop-over

Turn the right-hand rotary/push-button
v to highlight 3 to 8 and press to con-
firm.
Route guidance is switched off
The last destination driven to will appear in
line 1.
Requesting destination and route in-
formation
iIf the vehicle drives on a road which is
not digitized, 1 and 2 will appear in gray
and display the last available informati-
on. The message “Off Road: dest. info
not up-to-date” appears underneath.

148 NavigationRoute guidanceDisplaying route list
Turn the right-hand rotary/push-button
v to highlight 3 and press to confirm.
The message “Compiling Route List...”
will appear.Displaying the entry in full in a window

Press u.

Press u again to remove the window.
Displaying the next/previous page (if ar-
rows are filled)
Turn the right-hand rotary/push-button v
to highlight ;/: and press to confirm.Switching back to the symbol or map dis-
play

Press * twice.
P82.85-9197-31
iThe route list is updated during the trip.
It contains a selection of streets which
will be travelled or which still lie ahead.
If a longer route is calculated, e.g. to
avoid sections of the freeway
(page 142), these freeways may still
appear on the route list. As the vehicle
approaches the freeway, it will be dele-
ted from the route list.

149 Navigation
Route guidance
Activating the location map
If route guidance is active
Turn the right-hand rotary/push-button
v in the selection menu “Destination
Info” to highlight “Location map” and
press to confirm.
The location map faces north (North-
up).
1Geographic longitude and latitude for
your current location
2Number of satellites received
3Scale used the last time the location
map was activated
4Current vehicle location in the center of
the screen
5Name of the street the vehicle is
currently travelling onAltering the map scale (
page 158).
Switching back to the symbol or map dis-
play

Press * twice.
If route guidance is switched off

Press l.
The location map will appear.

Press l again to activate the main
destination input menu.iIf the location map appears after
COMAND has been switched on,
pressb to activate the main desti-
nation input menu.

150 NavigationRoute guidanceDisplaying current destination
Turn the right-hand rotary/push-button
v in the selection menu “Destination
Info” to highlight “Current Destination”
and press to confirm.
You will see the current destination.
Switching back to the symbol or map dis-
play

Press *.Requesting route mode
1Settings for route calculation mode

Turn the right-hand rotary/push-button
v in the selection menu “Destination
Info” to highlight “Options” and press
to confirm.
The settings for the current route are
displayed. Switching back to the symbol or map dis-
play
After 15 seconds, COMAND will return au-
tomatically to the symbol or map display.
or

Press *.
P82.85-9200-31
1
iSelecting calculation mode
(page 141)
Selecting a detour during destination
guidance (
page 163)
Marking a way point (
page 160)

151 Navigation
Route guidance
Activating the route map
1Current vehicle location
2Route displayed as blue line
3Destination

Turn the right-hand rotary/push-button
v in the selection menu “Destination
Info” to highlight “Route Map” and
press to confirm.
The route map faces north (North-up)
and shows the general view for the
whole route.
The map scale selected depends on the
route.
Switching back to the symbol or map dis-
play

Press *.Displaying a stop-over
You can display this information if you
have previously selected a way point
(
page 160).
1Way point
Place, type of stop-over and name

Turn the right-hand rotary/push-button
v in the selection menu “Destination
Info” to highlight “Stop” and press to
confirm.

152 NavigationRoute guidanceOnce the route has been calculated, the
symbol display will appear.
If you now are at the maneuver point, you
will also hear a voice output, e.g. “Please
turn right”.During route guidance, you can select the
following 3 screen displays:


Symbol display


Map display


Mix of map and symbol display
(page 157)
Voice output
During the trip, apart from visual informati-
on (symbol or map displays), COMAND
also provides all of the necessary route in-
formation via voice output.
COMAND gives you spoken recommenda-
tions


when route guidance begins


after the route has been calculated


before and during a change in the dri-
ving direction


on reaching the destination or a way
point
Beginning route guidance
Warning
G
Voice output is intended to direct you while
driving without diverting your attention from
the road and driving. Please always use this
feature instead of consulting the symbol or
map display for directions while driving
which may cause you to divert your attenti-
on from driving and increase your risk of ac-
cident.

153 Navigation
Route guidance
If an audio source is switched on, e.g. the
radio, the voice output will be mixed with
that of the audio source.
You can individually set the audio volume
differential between voice output/audio
source (
page 64). COMAND mutes navi-
gation voice outputs during telephone/
Tele Aid operation.
Repeating current voice output

Press the left-hand rotary/push-button
v briefly.
Muting current voice output

Press Ö briefly during a voice out-
put. You will hear the next announce-
ment normally.Switching the voice output off for the
duration of the current route guidance

Press Ö longer than 2 seconds du-
ring a voice output.
You will see the message “Voice output
is muted”.
Switching the voice output on again
The current route guidance has been com-
pleted.
Voice output will automatically switch on
again.
During a voice output

Press the left-hand rotary/push-button
v.Altering the voice output volume
At the COMAND control unit

Turn the left-hand rotary/push-button
v during a voice output.
COMAND will accept this setting for
following voice outputs.
At the multifunctional steering wheel
You can alter the volume with the steering
wheel keys during a voice output as well.
To raise the volume

Press J.
To lower the volume

Press I.

154 NavigationRoute guidanceExample of a traffic situation with voice
output
1“Prepare to turn right” (advance notice)
2“Turn right after 250 feet”
3“Please, turn next right”
Manual recall of the current voice instruc-
tion
Press left-hand rotary/push-button v.Advance notice of right turn
4Name of the street you are to turn onto
5Arrow indicating driving direction
6Name of the street you are travelling on
7Distance in miles to right turn Just before a right turn
8Name of the street you will to turn onto
9Right-turn arrow
10Name of the street you are now driving
on
11Distance graph to turning point, redu-
ces as you approach the intersectionTurning onto a street
iAs you approach a junction or inter-
change (e.g. I-695), COMAND will advi-
se you the direction of travel to follow
(e.g. North) as well as the name of the
route.
iIn special situations, e.g. when turning
quickly several times in succession,
there may be deviations in the accuracy
of the voice instructions.