wheel MERCEDES-BENZ C-Class 2008 W204 Comand Manual

177 Voice Control
Overview
The voice control confirms important com-
mands to you and gives you instructions in
the event of incorrect entries.
Command types
Voice control distinguishes between the
following types of command:

Global commands:
These are commands which can be
called up at any time (e.g. help or
phone commands).

Local commands:
These are commands which are only
available for the active application (e.g.
“Enter destination” during navigation).
Active application
The local commands refer to the applica-
tion currently shown on the display and to
the audio source you are currently listen-
ing to.
For example, if you are listening to the ra-
dio while the navigation application is ac-
tive on the display, you can operate both
applications using voice control.To operate a different function using voice
control, you must first switch to that appli-
cation using the corresponding command.
Operation using the multi-function
steering wheel
i You can cancel the dialog with voice control
at any time.
Voice control is operational around half a
minute after COMAND is switched on.
Starting the dialog
Switch on the ignition (see the vehicle
Owner's Manual).
Press the ! button.
An acoustic signal confirms that the di-
alog has been started.
Give a command.
Interrupting the dialog
If a list appears on the display, you can use
the “Pause” command to interrupt the dia-
log. You can then select an entry using the
COMAND controller.
To resume the dialog with voice control,
press the ! button on the multifunction
steering wheel.
1!Activates voice control
2LCancels voice control
3ç Decreases the volume
æ Increases the volume
oMute

180 Voice Control
Phone operation
“Phone”
Use the “Phone” command to select the
phone application. Use this command if
you wish the digits entered to be shown on
the display.
“Help Phone”
Voice control has an extensive help func-
tion. Using the “Help Phone” command,
you can have all the essential commands
for the phone read out (
page 201).
“Enter PIN”
Use the “Enter PIN” command to input the
PIN code (Personal Identification Number)
for your phone. To do this, the phone must
be connected via Bluetooth. When you
have given the command, voice control
prompts you to enter the PIN code.
Say the PIN code in the form of a continu-
ous string of digits or as blocks of digits,
e.g. three to five digits.
Digits 0 to 9 are permitted. Voice control
repeats the digits it recognizes after each
block of digits (with a pause of approxi-mately half a second between each block
of digits) and waits for you to continue
speaking.
Example of dialog:
sEnter PIN
tPlease say the PIN code
sZero one three three
tZero one three three
sOkay
! The card is blocked if you enter the wrong
code three times in a row. Use the PUK (personal
unblocking key) to unblock the card.
You can only enter the unblocking code via
the phone keypad – see the phone operat-
ing instructions.
“Dial number”
You can use the “Dial number” command
to dial a phone number.
The digits 0 - 9 and the word “Plus” are per-
mitted.
“Plus” replaces the international dialing
code, e.g. “00”.
Say the phone number in the form of a con-
tinuous string of digits or as blocks of dig-
its, e.g. three to five digits.Voice control repeats the digits it recogniz-
es after each block of digits (with a pause
of about half a second between each block
of digits) and waits for you to continue
speaking.
Example of dialog:
sDial number
tPlease say the number
sZero one three zero
tZero one three three
sFive zero zero five
tFive zero zero five
sOkay
tDialing number.
i You can also dial the specified number if you
press the s button on the multi-function
steering wheel instead of the concluding com-
mand “Okay”.
Commands

184 Voice Control
Navigation
You can use voice control to:

enter a state

enter a province

enter a city

enter a district (center)

enter a street

enter a house number

enter an entire address

enter a zip code

find address

enter a point of interest

select one of your previous destina-
tions

call up route information

store a destination

display the map

enlarge/reduce the size of the map

listen to the destination memory

start and stop route guidance

switch the guidance instructions on
and off
To select the navigation application
press the ! button on the multi-
function steering wheel.
Give the “Navigation” command.
Press the ! button.
Give one of the navigation commands
explained below.
You cannot start the route guidance until
all the necessary address data has been
entered.
“Help navigation”/“Help”
Using the “Help navigation” command, you
can have all the essential commands for
the navigation system read out.
i If voice control fails to recognize your entry,
it is advisable to spell the name of the town and
street. Spell names of towns and streets when
abroad.
The system guides you completely through
the dialog to route guidance. As soon as a
valid address is entered (at least the town),
you can use the “Start route guidance”
command to start the route guidance.
“Enter state”/“Enter province”
You can use the “Enter state”/“Enter pro-
vince” command to change the state or
province setting of the navigation system.
Example of dialog:
sEnter state
tPlease enter the name of the state.
uThe system shows a numbered list
of possible state names on the dis-
play. If there is only one entry on
the list, voice control asks if it is
correct.
tPlease select a line number.
sLine number 1 ...
tLine number 1 accepted.
Operation
Commands
Entering an address

191 Voice Control
Address book
“
The address book gives you the option of
storing information about people in the
form of entries.
Using voice control, you can dial a phone
number stored in the address book or start
route guidance for a stored address.
Apart from the speaker-dependent voice
tags stored in the address book, voice con-
trol can recognize all the entries in the
name fields of the address book. Recogni-
tion of the entries in the address book de-pends on the text that was entered. To
make a call you must say the text of the en-
try.
Check the address book entries for the fol-
lowing:

The name entries, e.g. last name and
first name, are in the right fields.

Do not use abbreviations or acronyms.

Avoid unnecessary spaces in names.

Do not use special characters.
You can improve voice recognition by sav-
ing a speaker-dependent voice tag for ad-
dress book entries.
Use a speaker-dependent voice tag:

for names which are difficult to pro-
nounce

to distinguish names which sound sim-
ilar

for names which are not pronounced as
they are written
Voice control can store up to 50 of these
address book entries by means of a speak-
er-dependent voice tag.You can use voice control at any time to:

save a name

select a name

delete a name

list the address book

delete the address book

open the address book

open an entry from the address book

list the phone book

list the destination memory
To open the address book: press the
! button on the multi-function
steering wheel.
Give the “Address book” command.
Press the ! button.
Give one of the address book com-
mands explained below.
Address book
G Warning
Please devote your attention first and fore-
most to the traffic situation you are in.
Before your journey, please familiarize your-
self with the address book functions.
Only use the Voice Control System when
road and traffic conditions permit you to do
so. Otherwise you could be involved in an
accident in which you or others could be in-
jured.
Overview
Operation

195 Voice Control
Radio and Satellite Radio*
You can use voice control to:

select the waveband

find a station

select a frequency (FM, AM)

select a category (Satellite radio)

listen to the station list

save a voice tag for a station

delete a station list (voice tags only)

delete a station (voice tag only)

select a channel number (Satellite ra-
dio)The names of all received and stored sta-
tions are available for voice recognition. To
improve voice recognition, you can store a
voice tag for a specific speaker.
To select the radio or satellite radio
application: press the ! button on
the multi-function steering wheel.
Say the command “Radio” or “Satellite
Radio”.
Press the ! button.
Say one of the radio or satellite radio
commands explained below.
You can always give the commands for the
radio when you are listening to the radio,
even if a different application is shown on
the display.
“Help Radio”
Using the “Help Radio” command, you can
have all the commands for the radio read
out.
“Help Satellite Radio”
Using the “Help Satellite Radio” command,
you can have all the commands for the sat-
ellite radio read out.
Selecting a waveband
You can set the waveband with the follow-
ing commands:

“FM”

“AM”
“Next station”/“Previous station”
You can start manual tuning and set the
next station using the following com-
mands:

“Next station”

“Previous station”
“Next category”/“Previous category”
You can use the following commands to
change the category on satellite radio:

“Next category”

“Previous category”
Radio and Satellite Radio*
G Warning
Please devote your attention first and fore-
most to the traffic situation you are in.
Before your journey, please familiarize your-
self with the radio functions.
Only use the Voice Control System when
road and traffic conditions permit you to do
so. Otherwise you could be involved in an
accident in which you or others could be in-
jured.
OperationCommands

219 Index
K
Kilobyte. . . . . . . . . . . . . . . . . . . . . . . 214
L
List entry
Selecting . . . . . . . . . . . . . . . . . . . . . . 33
LOGIC7 . . . . . . . . . . . . . . . . . . . . . . . . 37
Explanation . . . . . . . . . . . . . . . . . . . 214
M
Making calls
COMAND . . . . . . . . . . . . . . . . . . . . 101
Map
Information on map . . . . . . . . . . . . 123
Map display. . . . . . . . . . . . . . . . . . . 120
Setting map scale . . . . . . . . . . . . . . 119
Menu COMAND
Video. . . . . . . . . . . . . . . . . . . . . . . . . 74
MLP
Explanation . . . . . . . . . . . . . . . . . . . 214
MPEG1 Audio Layer 3 . . . . . . . . . . . 214MP3. . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Explanation . . . . . . . . . . . . . . . . . . . 214
Menu overview . . . . . . . . . . . . . . . . . 59
Mode . . . . . . . . . . . . . . . . . . . . . . . . . 60
Playback options. . . . . . . . . . . . . 66, 70
Selecting folders . . . . . . . . . . . . . . . . 63
Selecting medium . . . . . . . . . . . . . . . 62
Selecting tracks . . . . . . . . . . . . . . . . 63
Multifunction steering wheel. . . . . . 23
Multisession
Explanation . . . . . . . . . . . . . . . . . . . 214
Music Register. . . . . . . . . . . . . . 67, 214
Recording music files . . . . . . . . . . . . 68
N
Navigation
Basic settings . . . . . . . . . . . . . . . . . 120
Block Area . . . . . . . . . . . . . . . . . . . . 122
Destination input. . . . . . . . . . . . . . . 126
Detour function . . . . . . . . . . . . . . . . 154
Displaying/hiding menu system . . . 119
Driving maneuver . . . . . . . . . . . . . . 148
Menu overview . . . . . . . . . . . . . . . . 117
Navigation announcements . . . . . . 153
Off map . . . . . . . . . . . . . . . . . . . . . . 152
Off-road . . . . . . . . . . . . . . . . . . . . . . 152
POI input . . . . . . . . . . . . . . . . . . . . . 141
Route guidance . . . . . . . . . . . . . . . . 148
Traffic lane recommendation . . . . . 150
Navigation announcements . . . . . . 153
Switching off . . . . . . . . . . . . . . . . . . . 35
Notebook . . . . . . . . . . . . . . . . . . . . . 214
NTSC
Explanation . . . . . . . . . . . . . . . . . . . 214
O
Off map. . . . . . . . . . . . . . . . . . . . . . . 152
Off-road. . . . . . . . . . . . . . . . . . . . . . . 152