ECO mode MERCEDES-BENZ E-Class 2008 W211 Comand Manual

88 Telephone*Telephone operationThe unlock code protects the telephone
against unauthorized use. The unlock code
can be activated on the telephone
( Telephone Operation Guide).
Commit your unlock code to memory.

The telephone functions are available only
after entering the unlock code.
Example: unlock code 2307
In sequence, press the number
keys

, 
,"
and

.
In case of erroneous entry, delete the
last or more digits:
Press the
Delete
soft key as often
as required.

After entering all digits, press

or the
OK soft key.All telephone functions are available if
the correct number has been entered.After registering, Information referring
to the telephone signal appears at the
right end of the status bar.The unlock code has to be entered
again if the entry was incorrect.
When COMAND is switched ON, switching
to telephone mode from any other opera
-
tion mode is made as follows.On the COMAND control unit 
Press

.
The Telephone main menu opens ( page
89)
.
On the multifunction steering wheel
See
( page
25)
Entering the unlock code iThe system switches back to last mode
if the unlock code is not entered within
8 seconds after you are prompted to do
so.
Switching to telephone mode

128 Navigation*Route guidanceYou can start route guidance when the
destination input is complete and Start
Route
Guidance
is displayed at the
bottom of the main area.
Besides starting route guidance following
soft keys are available:
Mode
soft key

Provides access to the route mode set
-
ting for certain road types to be avoid
-
ed
( page
109)
.

Save
soft key

Stores the entered destination in the
destination memory
( page
149)
.

To start route guidance, press

.
The route is calculated and route guid
-
ance begins.
Depending on the distance to the destina
-
tion, route calculation can take some time.
While the route is being calculated, Reading Navi DVD... Please Wait
and an
arrow pointing towards the destination are
displayed. Once route calculation is com
-
plete, route guidance begins.Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.
As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con
-
ditions at the time of DVD production. DVD
maps may not cover all areas nor all routes
within an area.The system will calculate a new route dur
-
ing active route guidance if the driver fails
to follow the route guidance. During recalculation,
NEW
RTE
is displayed.
The arrow is not solid.
Start route guidance menu
Route calculation
Route re-calculation

131 Navigation*
Route guidance

Press any soft key.The soft key displays appear.

Press the
or
soft key.
Depending on your selection, the map
will zoom in and display greater detail
or zoom out and show a wider area.
The map scale bar in the status bar will
show the map scale currently selected.
Map orientationDuring route guidance, a symbol will ap
-
pear on the left of the bottom status bar if
map display is switched ON:

North symbol

:
Fixed map orientation, north is always
pointing up;
or
Compass symbol
:
Dynamic map orientation, driving direc
-
tion is always pointing up.
Map orientation can be set manually ( page
144)
.
Changing map displayThe map display can be switched between
split-screen mode and full-screen mode
manually or automatically. 
Split-screen mode

The map is shown on the left, while in
-
formation concerning the next driving
maneuver is shown on the right.

Full-screen mode

The map covers the entire screen.
Switching manually
Press
%
.
Each time
%
is pressed, the system
alternates between split-screen and
full-screen display mode.
Switching automaticallySee “Automatic map toggling” ( page
146)
.
iIf no soft key is selected within

approx. 8 seconds, the soft key display
will disappear.
iDepending on the map display setting ( page
145)
, in the full-screen mode
the status bar will be display:
the estimated time of arrival/re
-
maining distance to the destination
or stopover destination

the position display

175 Glossary
Root directory
The uppermost directory on a storage
medium.
Scan rate (MP3)
Indicates the frequency at which volt
-
age samples are taken during the con
-
version of an analog signal into a digital
signal. The analog-to-digital converter
converts the samples into digital sig
-
nals.
SCAN search
Plays receivable radio stations, or CD
tracks in succession, each for approx.
8 seconds.
SIM
(Subscriber
Identity
Module)
Card provided by the GSM telephone
service provider. Necessary for access
-
ing a mobile communication network.
SMS
(Short
Message
Service)
With this function, you can receive,
read and delete short text messages

(if SMS service is provided by your ser
-
vice provider).
Soft keys
Keys to activate different functions,

depending on the selected operating
mode.
Tele Aid
(Tele
matic
Alarm
Identification on
De-
mand)The Tele Aid system consists of three
types of response: automatic and man
-
ual emergency, roadside assistance
and information. Tele Aid is initially

activated by completing a subscriber
agreement and placing an acquain
-
tance call. The Tele Aid system is operational pro
-
vided the vehicle's battery is charged,
properly connected, not damaged and
cellular and GPS coverage are avail
-
able.
Telematics
Compound word made up of the terms
Telecommunication and Informatics.
Unlock code
Your unlock code prevents unautho
-
rized persons from using your tele
-
phone. The unlock code is a number
string, which you have to enter when
switching on the telephone.
UTC
(Universal
Time
Coordinated)

The mean sun time associated with lon
-
gitude zero (world time). It functions as
basis for the time zones.
WB
Weatherband