MERCEDES-BENZ GLE COUPE 2023 Owners Manual

=Vehicles with E-ACTIVE BODY CONTROL: in
drive program 1 and at lean level 2 and 3&WARNING Risk of accident if Active Steer-
ing Assist unexpectedly stops functioning
If the system limits of Active Steering Assist
are reached there is no guarantee that the system will remain active or will keep the vehi-cle in lane.
Always keep your hands on the steering
wheel and observe the tra"Pc carefully.Always steer the vehicle paying attention
to tra"Pc conditions.&WARNING Risk of accident if Active Steer-
ing Assist unexpectedly intervenes
The detection of lane markings and objects
may malfunction and cause unexpected steer-
ing interventions.
Steer according to tra"Pc conditions.
qActivating/deactivating Active Steering Assist
Requirements
= ESP n
is activated, but is not intervening.
= Active Distance Assist DISTRONIC is activa-
ted.
Multimedia system: 4 © 5
Settings 5
Assistance
5 DrivingActivate or deactivate Active Steering Assist .
Function of Active Emergency Stop Assist
If the system detects that the driver has not
steered the vehicle for a considerable period of time or has removed their hands from the steeringwheel, display 1 appears. If the driver still does
not steer the vehicle, or gives no con"Nrmation to
the system, a warning tone sounds in addition to
the visual warning message.
If the driver still does not respond to the warning,
the Beginning Emergency Stop message appears
on the driver display. If the driver still does not
respond, Active Distance Assist DISTRONIC reduces the speed. The vehicle is decelerated in
stages to a standstill.
Depending on the country, at speeds below
40 mph (60 km/h) the hazard warning lights
switch on automatically.
When the vehicle is stationary, the following
actions are carried out:
= The vehicle is secured with the electric park-
ing brake.
= Active Distance Assist DISTRONIC is ended.
= The vehicle is unlocked.Driving and parking209

=If possible, an emergency call is placed to the
Mercedes-Benz emergency call center.
The driver can cancel the deceleration at any time
by performing one of the following actions:
= Steering
= Braking or accelerating
= Deactivating Active Distance Assist
DISTRONIC
Active Lane Change Assist

q Function of Active Lane Change Assist
Active Lane Change Assist supports the driver when changing lanes by applying steering torque
if the driver activates a turn signal indicator.
Observe the notes on driving systems and your
responsibility; you may otherwise fail to recognize dangers (  page 186).
Assistance when changing lanes is provided if all the following conditions are met:
= You are driving on a freeway or road with mul-
tiple lanes in the direction of travel.
= The neighboring lane is separated by a broken
lane marking.
= No vehicle is detected in the adjacent lane.
= The vehicle speed is between 50 mph
(80 km/h) and 110 mph (180 km/h).
= Active Lane Change Assist is switched on in
the multimedia system.
= Active Steering Assist is activated and active.
Display on the driver\bs display in the Assistance
menu
1Green arrow: lane change initiated2Red arrow: lane change canceled
If no vehicle is detected in the adjacent lane and a
lane change is permitted, the lane change begins a"ser the driver has activated the turn signal indi-
cator. This is indicated to the driver by a green
"Oashing arrow next to the steering wheel symbol
210Driving and parking

± . The message Lane Change to the Left , for
example, also appears. If Active Lane Change
Assist is activated with the turn signal indicator,
but a lane change is not possible immediately,
only the green "Oashing arrow appears next to the
steering wheel symbol ±, which remains
green.
As soon as the lane change assistance starts, the
turn signal indicator is automatically activated.
If a lane change is not possible, the arrow is faded out a"ser a few seconds and a new lane change
must be initiated. An immediate lane change is
only possible on freeway sections without speed limits.
In addition, a warning tone may sound, depending
on the situation.&WARNING Risk of accident when changing
lane to an occupied adjacent lane
Lane Change Assist cannot always clearly detect if the adjacent lane is free.
The lane change might be initiated although
the adjacent lane is not free.
Before changing lanes, make sure that
the neighboring lane is free and there is
no danger to other road users.Monitor the lane change.&WARNING Risk of accident if Lane Change
Assist unexpectedly stops functioning
If the system limitations for Lane Change
Assist have been reached, there is no guaran-
tee that the system will remain active.
Lane Change Assist cannot then assist you by
applying steering torque.
Always monitor the lane change and
keep your hands on the steering wheel. Observe the tra"Pc conditions and steer
and/or brake if necessary.
System limits
The system limits of Active Steering Assist apply to Active Lane Change Assist (  page 207).
The system may also be impaired or may not func-
tion in the following situations:
= The sensors in the rear bumper are dirty, dam-
aged or covered by a sticker or ice and snow, for example.
= The exterior lighting shows a defect.\bThe Active Lane Change Assist sensors adjust
automatically while a certain distance is being
driven a"ser the vehicle has been delivered.
Active Lane Change Assist is unavailable dur-
ing this teach-in process; no arrow appears next to the Active Steering Assist symbol Ø when the turn signal indicator is activa-
ted.

q Setting Active Lane Change Assist
Multimedia system: 4 © 5
Settings 5
Assistance
5 Driving 5
Active Lane Change Assist
Select Active Lane Change Assist .Choose between the On and Off (O"M) setting
options.Driving and parking211

\bIf Active Steering Assist has been switched
o"M, it will not be possible to operate Active
Lane Change Assist .
Active Brake Assist

qFunction of Active Brake Assist
Active Brake Assist consists of the following func-
tions:
= Collision warning
= Autonomous braking function
= Situation-dependent brake force boosting
= Vehicles with Driving Assistance Package: Eva-
sive Steering Assist and cornering function
Active Brake Assist can help you to minimize the
risk of a collision with vehicles, cyclists or pedes- trians or to reduce the e"Mects of such a collision.
If Active Brake Assist has detected a risk of colli-
sion, a warning tone will sound and the Active
Brake Assist warning lamp / will light up.
In the Assistance menu, an insu"Pcient distance
1 to the vehicle in front is displayed in red. If you
further reduce the distance, the vehicle in front will also be highlighted in red. When the systemdetects a risk of collision, red radar waves 2
appear in front of the vehicle.
Vehicles with PRE-SAFE n
: depending on the coun-
try, an additional haptic warning will occur in the form of slight, repeated tensioning of the seat belt.
If you do not react to the warning, autonomous
braking can be initiated in critical situations.
In especially critical situations, Active Brake Assist
can initiate autonomous braking directly. In this
case, the warning lamp and warning tone occur
simultaneously with the braking application.
If you apply the brake yourself in a critical situa-
tion or apply the brake during autonomous brak-
ing, situation-dependent brake force boosting will occur. The brake pressure will increase up to max-
imum full-stop braking if necessary.
Observe the notes on driving systems and your responsibility; you may otherwise fail to recognizedangers (  page 186).
If autonomous braking or situation-dependent
brake force boosting has occurred, pop-up 1 will
appear on the driver\bs display and then automati-
cally disappear a"ser a short time.
212Driving and parking

If the autonomous braking function or situation-dependent brake force boosting is triggered, addi-
tional preventive measures for occupant protec-
tion (PRE-SAFE n
) may also be initiated.&WARNING Risk of an accident caused by
limited detection performance of Active
Brake Assist
Active Brake Assist cannot always clearly iden- tify objects and complex tra"Pc situations.
In such cases, Active Brake Assist might:
= Give a warning or brake without reason
= Not give a warning or not brake
Active Brake Assist is only an aid. The driver is
responsible for maintaining a su"Pciently safe
distance to the vehicle in front, vehicle speed and for braking in good time.
Always pay careful attention to the tra"Pc
situation; do not rely on Active Brake
Assist alone.Be prepared to brake or swerve if neces-
sary.If Active Brake Assist is deactivated or the func- tions are restricted, e.g. due to activation ofanother driving system, the ê display message
will appear on the driver\bs display.
If the system is unavailable due to dirty or dam-
aged sensors or due to a malfunction, or if the
functions are restricted, the

=At speeds up to approximately 37 mph
(60 km/h) when approaching crossing cyclists
Collision warning (vehicles with Driving Assistance
Package)
The collision warning can aid you in the following
situations with an intermittent warning tone and a
warning lamp:
= At speeds up to approximately 155 mph
(250 km/h) when approaching vehicles ahead
= At speeds up to approximately 62 mph
(100 km/h) when approaching stationary
vehicles
= At speeds up to approximately 50 mph
(80 km/h) when approaching moving pedes-
trians and cyclists ahead
= At speeds up to approximately 43 mph
(70 km/h) when approaching stationary pedestrians, crossing vehicles and stationary
and crossing cyclistsAutonomous braking function (vehicles without
Driving Assistance Package)
If the vehicle is traveling at speeds above approx-
imately 4 mph (7 km/h), the autonomous braking
function may intervene in the following situations:
= At speeds up to approximately 124 mph
(200 km/h) when approaching vehicles ahead
= At speeds up to approximately 50 mph
(80 km/h) when approaching cyclists ahead
= At speeds up to approximately 37 mph
(60 km/h) when approaching moving pedes-
trians, crossing cyclists, and stationary vehi- cles
Autonomous braking function (vehicles with Driv-
ing Assistance Package)
If the vehicle is traveling at speeds above approx-
imately 4 mph (7 km/h), the autonomous braking
function may intervene in the following situations:
= At speeds up to approximately 155 mph
(250 km/h) when approaching vehicles ahead
= At speeds up to approximately 62 mph
(100 km/h) when approaching stationary
vehicles= At speeds up to approximately 50 mph
(80 km/h) when approaching cyclists ahead
= At speeds up to approximately 43 mph
(70 km/h) when approaching stationary and moving pedestrians, crossing vehicles and sta-
tionary and crossing cyclists
Situation-dependent brake force boosting (vehi- cles without Driving Assistance Package)
Situation-dependent brake force boosting may
intervene from a speed of approximately 4 mph
(7 km/h) in the following situations:
= At speeds up to approximately 155 mph
(250 km/h) when approaching vehicles ahead
= At speeds up to approximately 50 mph
(80 km/h) when approaching stationary vehi-
cles and cyclists ahead
= At speeds up to approximately 37 mph
(60 km/h) when approaching moving pedes- trians and crossing cyclists214Driving and parking

Situation-dependent brake force boosting (vehi-cles with Driving Assistance Package)
Situation-dependent brake force boosting may
intervene from a speed of approximately 4 mph
(7 km/h) in the following situations:
= At speeds up to approximately 155 mph
(250 km/h) when approaching vehicles ahead
= At speeds up to approximately 62 mph
(100 km/h) when approaching stationary
vehicles
= At speeds up to approximately 50 mph
(80 km/h) when approaching cyclists ahead
= At speeds up to approximately 37 mph
(60 km/h) when approaching stationary and moving pedestrians, crossing vehicles, and
stationary and crossing cyclists
Canceling a brake application of Active Brake
Assist
You can cancel a brake application of Active
Brake Assist at any time by:
= sharply depressing the accelerator pedal or
with kickdown
= releasing the brake pedalActive Brake Assist may cancel the brake applica-
tion when one of the following conditions is ful"Nl-
led:
= You maneuver to avoid an obstacle
= There is no longer a risk of collision
= An obstacle is no longer detected in front of
your vehicle
Evasive Steering Assist (only vehicles with Driving
Assistance Package)
Evasive Steering Assist has the following charac- teristics:
= The ability to detect stationary or moving
pedestrians.
= Assistance through power-assisted steering if
a swerving maneuver is detected.
= Activation through an abrupt steering move-
ment during a swerving maneuver.
= Assistance during swerving and straightening
of the vehicle.
= Reaction from a speed of approximately
12 mph (20 km/h) up to a speed of approx-
imately 43 mph (70 km/h).You can prevent the assistance at any time by actively steering.
Cornering function (only vehicles with Driving Assistance Package)
If the system detects a risk of a collision with an oncoming vehicle when turning across an oncom-
ing lane, autonomous braking can be initiated at
speeds below 9 mph (15 km/h) before you have
le"s the lane in which you are driving.&WARNING Risk of accident despite Eva-
sive Steering Assist
Evasive Steering Assist cannot always recog-
nize objects or complex tra"Pc situations
clearly.
Moreover, the steering support provided by
Evasive Steering Assist is not su"Pcient to
avoid a collision.
Always pay careful attention to the tra"Pc
situation; do not rely on Evasive Steering
Assist alone.Be prepared to brake or swerve if neces-
sary.Driving and parking215

End the support by actively steering innon-critical situations.Drive at an appropriate speed if there
are pedestrians close to the path of your
vehicle.
System limits
Full system performance is not available for a
short time a"ser switching on the vehicle or a"ser
driving o"M. Depending on the environmental con-
ditions, it may take a few minutes before full sys-
tem performance is available.
The system may be impaired or may not function,
particularly in the following situations:
= In snow, rain, fog, heavy spray, direct sunlight
or highly variable light conditions, or if there is
glare.
= If the sensors are dirty, fogged up, damaged or
covered.
= If the sensors are impaired due to interference
from other radar sources, e.g. strong radar
re"Oections in parking garages.
= If a loss of tire pressure or a defective tire has
been detected and displayed.
= If DSR is active.
= In complex tra"Pc situations where objects
cannot always be clearly identi"Ned.
= If pedestrians or vehicles move quickly into
the sensor detection range.
= If pedestrians are hidden by other objects.
= If the typical outline of a pedestrian cannot be
distinguished from the background.
= If a pedestrian is not detected as such, e.g.
due to special clothing or other objects.
= If the driver\bs seat belt is not fastened.
= On bends with a tight radius.\bThe Active Brake Assist sensors adjust auto-
matically while a certain distance is being
driven a"ser the vehicle has been delivered.
Active Brake Assist is unavailable or only par-
tially available during the teach-in process.

q Setting Active Brake Assist
Requirements
= The vehicle is switched on.
Multimedia system:
4 © 5
Settings 5
Assistance
5 Collision AvoidanceActivate or deactivate the function.\bIt is recommended that you always leave
Active Brake Assist activated.
When Active Brake Assist is deactivated, the dis- tance warning function, the collision warning, the autonomous braking function and Evasive Steer-ing Assist will be deactivated.
\bIf Active Brake Assist is deactivated, the

you by displaying detected speed limits and over-
taking restrictions on the driver display.
Observe the notes on driving systems and your responsibility; you may otherwise fail to recognizedangers (  page 186).
Since Tra"Pc Sign Assist also uses the data stored
in the navigation system, it can update the display in the following situations without detecting tra"Pc
signs.
The camera also detects tra"Pc signs with a
restriction indicated by an additional sign (e.g.
when wet). These are only displayed if a restric-
tion applies or if the system cannot clearly deter-
mine whether the restriction applies.
Warning when the maximum permissible speed is
exceeded
The system can warn you if you unintentionally
exceed the maximum permissible speed. Depend-
ing on the country, you can set in the multimedia system by how much the maximum permitted
speed may be exceeded before a warning is given. You can specify whether the warning is to be just
a visual warning or an acoustic one as well.Displays in the driver\bs display1Permissible speed2Permissible speed when there is a restriction3Additional sign with restriction
The system can show up to two tra"Pc signs in the
driver\bs display simultaneously. The system always prioritizes displaying speed limits. Up to one traf-
"Nc sign with a maximum permissible speed can be
shown in the head-up display. If two speed signs are shown in the driver display, e.g. in the case of
detected restrictions, the value of the le"s-hand
speed limit 1 is always transmitted to the TEM-
POMAT or Active Distance Assist DISTRONIC for
acceptance and shown in the head-up display.
Tra"Pc Sign Assist also uses data from the digital
street map in the navigation system. When you
leave or enter a municipality or change roads, on
a highway exit or slip road forexample, or a"ser
you turn at an intersection, the display in the driv-
er\bs display can thus be updated without a tra"Pc
sign having been detected.
If Tra"Pc Sign Assist cannot determine the cur-
rently applicable maximum permissible speed
(e.g. due to missing signs), the following display
appears in the driver\bs display:
Tra"Pc Sign Assist is not available in all countries.
If the vehicle is in a country where Tra"Pc Sign
Assist is not supported, this is displayed continu-
ously.
Driving and parking217

System limits
The system may be impaired or may not function particularly in the following situations:
= If there is poor visibility, e.g. due to insu"Pcient
illumination of the road, highly variable shade
conditions, rain, snow, fog or heavy spray.
= If there is glare, e.g. from oncoming tra"Pc,
direct sunlight or re"Oections.
= If there is dirt on the windshield in the vicinity
of the multifunction camera or if the camera isfogged up, damaged or obscured.
= If the tra"Pc signs are hard to detect, e.g. due
to dirt, snow or insu"Pcient lighting, or
because they are obscured.
= If the information on the navigation system\bs
digital map is incorrect or out of date.
= If signs are ambiguous, e.g. road signs in road-
works or in adjacent lanes.
= If you turn sharply when passing tra"Pc signs
outside the camera\bs "Neld of vision.
qSetting Tra"Pc Sign Assist
Multimedia system: 4 © 5
Settings 5
Assistance
5 Assistance 5
Traffic Sign Assist
Activating or deactivating the speed warningSwitch o"M Speed Limit Warning .
The speed warning remains o"M according to
country-speci"Nc legislation until the next time
the vehicle is switched on or o"M and the driv-
er\bs door is opened.
Change the type of speed warning
Change the warning to Visual only or Visual
and acoustic .
Setting the warning threshold
This value determines the speed at which a warn-
ing is issued when exceeded.
Set the desired speed under Warning Thresh-
old.Activating or deactivating further functions of Traf-
"Nc Sign AssistSwitch further warning contents on or o"M.
The available functions are switched on or o"M.
Set the type of warning for other functions
Select Visual only or Visual and acoustic .
Tra"Pc light view

qInformation about the tra"Pc light view
The tra"Pc light view supports the driver when
waiting in front of a red light by displaying the camera image on the central display. The camera
image is displayed when the driver is the "Nrst vehi-
cle in front of the red light and faded out when the
vehicle drives o"M.

q Displaying tra"Pc light view
Requirements: = The Traffic Light View option is switched on .
= A tra"Pc light view is available.
218Driving and parking