Navigation MERCEDES-BENZ M-Class 2004 W163 Comand Manual

95 Navigation*
Important notes
Travelling abroad
If you intend to travel through different re-
gions or abroad, you will need the respec-
tive navigation DVD.
Contact your Mercedes-Benz Center or
the Customer Assistance Center at
1-800-FOR-MERCedes (1-800-367-6372)
for available DVDs.
Change the navigation DVD
(page 98).
iThe CD/DVD drive can read navigation
DVDs and playback audio CDs.
If an audio CD is inserted in the CD/
DVD drive and is pressed, the
message MUSIC CD INSERTED
PLEASE REPLACE WITH A NAV-
IGATION DISC is displayed.
Remove the audio CD and insert a
navigation DVD (
page 98).
!GPS (G
lobal P
ositioning S
ystem) sig-
nals received make it possible to deter-
mine the current vehicle position.
Deviations from the actual position
may occur

If the reception of GPS signals is
disturbed, e.g. in parking garages
and tunnels

If road conditions are poor

If your vehicle has been damaged
The MCS may require some time to
find its exact position after your vehi-
cle has been transported by car, train,
or ferry. Moving the vehicle a few yards
is typically enough to remedy this situ-
ation.

96 Navigation*Quick reference

97 Navigation*
Quick reference
Function
Page
1
Color display
2
Delete the last input, re-
turn to previous screen
3
Press to:
Open and close the con-
trol panel
The CD/DVD slot and
button are located
behind the control panel.
98
4
Press to:
Switch the MCS on and
off
Turn to:
Set the volume differ-
ence between an audio
source and navigation
voice during an an-
nouncement
14
16
142
Function
Page
5
Entering address num-
bers
6
Altering the map scale
7
Pushing Joystick:
Moves cursor
Pressing :
Confirms selection
8
Switching the navigation
system on
Activating the navigation
menu
102
9
Repeating current (last)
voice instruction
a
Altering the map scale
126
Function
Page
b
Softkeys for:
DETR: Detour
STOP: Cancels the cur-
rent destination,
LIST: Lists the maneu-
ver
MUTE: Mutes the voice
instructions
LGHT: Changes between
light and dark mode
MAP: Changes between
map screen and maneu-
ver screen, returning to
the map
To activate the softkey
functions, press any soft-
key
131
127
125
126
150

98 Navigation*Quick referenceInserting
Press to lower the front of the
control panel.
Insert the navigation DVD into the CD/
DVD slot with the label side up. The
DVD is automatically fed into the CD/
DVD player.
The control panel closes automatically
after a few seconds.Ejecting

Press to lower the front of the
control panel.

Press to eject the inserted DVD.

Press to raise the front of the
control panel.
Inserting or ejecting the navigation
DVD
iIf a navigation DVD is inserted, the nav-
igation DVD symbol is displayed
when in the radio, tape, or CD mode.

99 Navigation*
Quick reference
iIf the display is in the down position for
more than 20 seconds, 2 successive
beeps are heard. This will continue at 5
second intervals until the display is re-
turned to its normal position. Press
to return the control panel to its
closed position.
!A lowered control panel can easily be
damaged. As soon as the disc is eject-
ed, close the control panel.
iIf you do not remove an ejected DVD,
the CD/DVD automatically retrieves it
after 10 seconds.
The CD/DVD drive can
Read navigation DVDs or

Playback audio CDs.

100 Navigation*Destination input

Menu overview

101 Navigation*
Destination input
Function
Page
1
Main navigation menu
2
Setup Select menu
3
Display Setup menu
4
Guidance Setup menu
5
Clock Adjustment menu
154
6
Language/Unit menu
152
7
System Information
menu
155
8
Route Select menu
9
Avoid Road menu
129
Function
Page
a
Change Current Method
menu
127
b
Delete Stopover menu
c
Map screen
d
Edit Select menu
e
Edit Today’s Plan menu
139
f
Edit Address Book menu
136
g
Edit Previous Destina-
tions menu
141
h
Save Current Position in
Previous Destinations
menu
140
Function
Page
j
Find Destination by
menu
k
Today’s Plan menu
137
l
Address Book menu
118
m
Previous Destination
menu
119
n
Phone Number menu
116
o
Point of Interest menu
112
p
Intersection menu
108
q
Address menu
104

102 Navigation*Destination input
Press .
The navigation start up screen only ap-
pears during the software loading pro-
cess.
After the navigation system boots up, the
disclaimer screen appears.

To accept the statements, press .
The display that appears is dependent
on the last navigation function used.Depending on the last system mode, MCS
calls one of the following displays:
If route guidance has been switched off

The main destination input menu
If route guidance has been switched on

The symbol display with an arrow
indicating your driving direction
or

The map with the symbol of current
vehicle location
or

The location map.
Switching the navigation system on

 



103 Navigation*
Destination input
Changing over to another system, e.g.
radio
Press to switch to radio opera-
tion.
The navigation system continues to run
in the background.
If you switch off the MCS, the naviga-
tion and audio system also switch off.You can search for a destination by:

Address (
page 104)

Intersection (
page 108)

Point of interest (
page 112)

Phone number (
page 116)

Recalling stored destinations from your
address book (
page 118)

Selecting previous destinations
(page 119)

Selecting the destination directly from
the map (
page 120)

Today’s plan (
page 137)
!Potential fault messages during naviga-
tion start up:
MUSIC CD INSERTED PLEASE
REPLACE WITH A NAVIGA-
TION DISC.
Eject the inserted CD and insert a
navigation DVD.

Please insert DVD-ROM.
Insert a navigation DVD.

Error reading DVD-ROM.
Please check the disk.
Check the DVD for damages like
scratches. Replace DVD.
If the error has been eliminated, you will
see the navigation start up screen.
Entering destination address

104 Navigation*Destination inputSearching for a destination by address
Press .

Use the joystick to select INPUT
DESTINATION and press .The Find Destination by menu appears.

Use the joystick to select Address
and press .You can find the address by:

Selecting Street Name, if you want
to search for the address by street
name and number.

Selecting City Name, if you want to
search for the city name first.

Selecting Change State, if you
want to search for the address in a dif-
ferent state.

Selecting Change Province, if you
want to search for the address in a dif-
ferent province.

Use the joystick to select the desired
method and press .










iIf you have entered the state or the
province and you know the city name,
use the city name to start your search.
This will save time versus starting a
search using the street name.