remote start MERCEDES-BENZ S-Class SEDAN 2016 W222 Comand Manual
Page 13 of 298
Rear Seat EntertainmentSyste m ... 273
Reserve fuel level
Switching the function on/off in
COMAND ......................................... 85
Resetting (factory settings) ............... 59
Route (navigation)
Selecting an alternative route ........ 113
Setting route options (avoiding:
highways, toll roads, tunnels, fer-
ries) ................................................. 85
Setting the route type (short
route, fast route, dynamic route or
economic route) ............................... 84
Starting calculation .......................... 90
Route guidance
Continue ........................................ 112
Freeway information ...................... 110
General notes ................................ 105
Lane recommendations ................. 109
Off-road ......................................... 115
Traffic reports ................................ 116
S
Safety notesAudio CD/DVD and MP3 mode ..... 212
Using the telephone ....................... 138
Satellite radio
Displaying information ................... 207
Overview ........................................ 204
Registering .................................... 202
Switching to ................................... 204
SatRadio
Channel list updates ...................... 208
Memory functions .......................... 206
Music and sports alerts ................. 206
Notes ............................................. 202
Selecting a category ...................... 204
Selecting a channel ....................... 205
Tagging music tracks ..................... 207
Screen
Selecting for the remote control .... 274
SD memory card
Inserting ........................................ 217
Seat-belt adjustment function
Activating/deactivating
(COMAND) ....................................... 64 Seats
Adjusting the lumbar support
(COMAND) ....................................... 69
Balance (seat heating) ..................... 69
Massage function ............................ 70
Resetting settings ............................ 71
Seat functions (COMAND) ............... 68
Selecting for adjustment
(COMAND) ....................................... 68
Selecting stations
Radio ............................................. 198
Selecting the country .......................... 89
Sending DTMF tones ......................... 149
Setting access data
Online and Internet ........................ 178
Setting the audio format
Multi-Seat Entertainment System .. 292
Rear Seat Entertainment System ... 292
Setting the language
COMAND ......................................... 56
Multi-Seat Entertainment System .. 292
Rear Seat Entertainment System ... 292
Setting the night design ..................... 46
Setting the text reader speed ............ 51
Setting the volume
Telephone calls ................................ 27
Settings
Sound settings ............................... 250
SIRIUS weather display
5-day forecast ................................ 258
Daily forecast ................................. 258
Detail information .......................... 259
Information chart ........................... 258
Selecting a location for the
weather forecast ............................ 259
Switching o
n/off ........................... 258
Weather map ................................. 262
SIRIUS weather map
Storm Guide .................................. 268
Storm Watch Box ........................... 268
Sound
Switching on/off .............................. 28
Sound settings
Balance/fader ............................... 251
Calling up the sound menu ............ 250
Changing the loudspeaker source .. 251
Equalizer ........................................ 250
Index11
Page 33 of 298
SPLITVIEW is activated with the last settings,
if:
RCOMAND is switched off by removing the
key from the ignition lock while SPLITVIEW
is activated
Rand switched on again within 30 minutes
If COMAND is switched on again after more
than 30 minutes, SPLITVIEW is not activa-
ted.
If SPLITVIEW is activated on the front-
passenger side, the settings from the driver's
side will be used.
In media mode
SPLITVIEW can be activated from any media
mode (e.g. Media Interface).
XTo activate: slide6the controller.
The menu bar is shown.
XTo select Options, turn and press the con-
troller.
A menu appears.
XSelect Start Application at Other
Seat.
A menu appears.
XSelect SplitView.
A window with the Starting
Sourcein
SplitView…message appears.
SPLITVIEW switches on. The ùsymbol
appears in the status bar.
XTo deactivate: from the driver's side, use
the Ø button (
Ypage 30).
XFrom the front-passenger side, use the
COMAND remote control.
XAdditional options: to selectAddi‐
tionalOptions…, turn and press the con-
troller.
A menu appears.
XTo switch SPLITVIEW on/off: proceed as
described under "Switching the rear-com-
partment displays on/off" (
Ypage 76).
Instead of selecting a rear-compartment
display, select SplitView
.
XTo lock/unlock SPLITVIEW: proceed as
described under "Locking/unlocking the
rear-compartment displays" (
Ypage 76).
Instead of selecting a rear-compartment
display, select SplitView
.
Transferring a destination to the
driver
Using SPLITVIEW you can select a destination
from the front-passenger side and transfer
this to the driver's side.
XSwitch on SPLITVIEW (Ypage 30).
XTo selectICON_SplitView On, turn and
press the controller.
The SPLITVIEW symbol appears in the dis-
play and the ùdisplay switches to ù
Off.
XSelect®in the main function bar with the
COMAND remote control.
A menu appears.
XUsing the COMAND remote control, select
Mercedes-Benz Apps
.
You see the selection of Mercedes-Benz
Apps.
XSelect Google Local Searchwith the
COMAND remote control (
Ypage 182).
A menu appears.
XSelect a search position, e.g. In the
Vicinity of the Destination.
A menu appears.
XSelect a type of search inquiry, such as
Enter search term
.
An input field appears.
SPLITVIEW31
Overview and operation
Page 230 of 298
Bluetooth®audio mode
Connecting Bluetooth®audio devices
Prerequisites
XActivate the Bluetooth®function in
COMAND (
Ypage 55).
Bluetooth
®audio mode requires a Blue-
tooth®-capable audio device.
Check your Bluetooth
®audio device for the
following (see the manufacturer's operating
instructions):
RBluetooth®audio profile
The Bluetooth
®audio device must support
the A2DP and AVRCP Bluetooth®audio
profiles.
RBluetooth®visibility
Certain Bluetooth
®audio devices do not
just require activation of the Bluetooth®
function. In addition, your device must be
made "visible" to other devices.
RBluetooth®device name
This device name is predetermined but can
usually be changed. For a clear selection of the Bluetooth
®device, Mercedes-Benz rec-
ommends that you customize the device
name.
iA2DP ( Advanced Audio Distribution
Profile): Bluetooth®audio profile for audio
data transmission
AVRCP ( Audio Video Remote Control
Profile): Bluetooth
®audio profile for audio
data playback.
iThe Bluetooth®device must be visible for
authorization. After authorization,
COMAND even finds the Bluetooth
®device
when it is not visible.
XThe Bluetooth®function in COMAND must
be activated (
Ypage 55).
General notes
Before using your Bluetooth®audio device
with COMAND for the first time, you will need
to authorize it.
When you authorize a new Bluetooth
®audio
device, it is connected automatically. Con-
nection involves first searching for a Blue-
tooth
®audio device and then authorizing it.
You can authorize up to fifteen Bluetooth
®
devices.
iIf you authorize a mobile phone that sup-
ports Bluetooth®audio, the A2DP and
AVRCP Bluetooth®audio profiles are con-
nected automatically.
The mobile phone is then entered:
Rin the Bluetooth®telephone list
(
Ypage 142)
Rin the Bluetooth®device list
(
Ypage 229)
Mercedes-Benz recommends authorizing a
mobile phone in Bluetooth
®telephony
(
Ypage 142).
iIf the mobile phone that is connected only
supports two Bluetooth®profiles at the
same time, COMAND functions may
behave as follows:
Rwhen connecting to the Internet, play-
back is stopped on the Bluetooth®audio
device.
Rwhen starting playback on the Blue-
tooth®audio device, the Internet con-
nection is ended.
228Bluetooth®audio mode
Media
Page 275 of 298
Rear-compartment screens
:Display
;Brightness sensor
=Switching the display on/off
?Socket for headphones
Setting the display angle
XPress the CAR button on the remote con-
trol.
XPress the :button on the remote con-
trol.
XUsing the =Ì buttons on the remote
control, select Display
and confirm by
pressing 9.
XSelectTilt Display.
XSelectUpwardorDownward.
The display tilts upward or downward.
Remote control
Overview
:Selects main menus
;Selects the screen for the remote control
=Selector wheel for selecting menus, radio
stations, music tracks and chapters
?Buttons for selecting menus
ADeletes an entry
BSkip-back function, fast forward/rewind,
start/pause, menu selection, radio sta-
tions, music tracks and chapters
CDirect selection of radio stations, music
tracks and chapters using the number
keypad
DVolume, switches sound on/off (for cor-
ded headphones)
EBack button
FConfirms a selection
GIndicator lamp
HSwitches the screen on/off
iTwo remote controls are supplied for the
US and Canadian markets.
Rear Seat Entertainment System overview273
Rear Seat Entertainment System
Z
Page 276 of 298
Selecting the screen for the remote con-
trol
You can use the remote control to operate
one of the two rear screens at a time. To do
so, you must switch the remote control to the
desired screen.
XTo select the left-hand screen: turn thumb-
wheel:until "L REAR" appears in the win-
dow.
XTo select the right-hand screen: turn the
thumbwheel until "REAR R" appears in the
window.
XTo select the COMAND screen: turn thumb-
wheel :until "COMAND" appears in the
window.
Please be aware that using the thumbwheel
to select screens may cause unwanted
changes to the screens of your occupants.
Up to four remote controls can be used in the
vehicle at the same time.
Switching the screen on/off
The switched-on rear compartment screens
switch off after 30 minutes if:
Rthe SmartKey is in position 0or 1in the
ignition lock
Rthe SmartKey is not inserted Before the screens switch off, they show a
message to this effect.
You can switch the screens back on. Please
note that this may cause the starter battery to
discharge.
XPress button
:on the remote control.
The respective rear-compartment screen
switches on or off.
iYou can only switch the screens on using
the remote control if the ignition is
switched on.
Switching the button lighting on/off
XLighting of the remote control buttons is
divided into three areas. The corresponding
area is activated every time you press a
button. It switches off again automatically
5 to 10 seconds after the last button has
been pressed.
274Rear Seat Entertainment System overview
Rear Seat Entertainment System
Page 278 of 298
Operation via smartphone
:Skip back button for selected rear com-
partment displays
;To select and display active rear compart-
ment displays
=Controller
?Remote control menu bar
ATo skip forward
BTo increase the volume in the vehicle inte-
rior
CTo reduce the volume in the vehicle inte-
rior
DTo show the number or alphabetical key-
pad
ETo skip back
FTo start/pause
You can also operate the Rear Seat Enter-
tainment System using a smartphone.
In order to be able to use this function, you
will need to download an app from Google Play™ (Android) or the App Store
®(iOS) and
install this on your smartphone.
Further information on connecting and using
smartphones with COMAND can be found in
the app description in Google Play™ (Android)
or in the App Store
®(iOS).
CD/DVD drive
:CD/DVD slot
;CD/DVD eject button
Depending on the vehicle model and equip-
ment level, the CD/DVD drive is found:
Rat the rear of the center console under the
automatic climate control panel or
Rbetween the parcel shelf and skibag.
AUX jacks
:AUX, right-hand (R) jack for audio signal
(red)
;AUX, left-hand (L) jack for audio signal
(white)
=AUX, video (V) jack (yellow)
276Rear Seat Entertainment System overview
Rear Seat Entertainment System
Page 287 of 298
Exiting the Internet functions:
XPress the%button on the remote con-
trol.
A menu appears.
XSelect the Üsymbol in the menu and
press the 9button on the remote control
to confirm.
or
XSelect another function (e.g. Media or
Radio).
Radio mode
XTo switch on: press the$button on
the remote control.
Radio mode starts.
Further information on radio mode
(
Ypage 197).
Media mode
Activating media mode
There are several ways to activate media
sources using COMAND.
The relevant sections of the Operator's Man-
ual describe the simplest way to activate a
media source.
This section describes all options for activat-
ing media sources.
Starting media playback using the
button
XPress the Õbutton on the remote con-
trol.
The last media source you have set is dis-
played.
If playable music files are found, they will be played by COMAND.
XTo show the menu: press the Õbutton
on the remote control.
XTo select the media source: turn the selec-
tor wheel on the remote control.
or
XPress the =; buttons on the remote
control.
The menu appears with the available media sources.
XPress the 9button on the remote control.
If the disc contains music or video files,
these will be played. The corresponding
basic menu will be shown.
Starting media playback using the
main function bar
XTo show the menu: press the 9button
on the remote control.
XSelect Mediausing the =; buttons
on the remote control and press the 9
button to confirm.
XTo select the media source: turn the selec-
tor wheel on the remote control.
or
XPress the =; buttons on the remote
control.
The menu appears with the available media
sources.
XPress the 9button on the remote control.
If the disc contains music or video files,
these will be played. The corresponding
basic menu will be shown.
Media mode285
Rear Seat Entertainment System
Z
Page 288 of 298
Starting media using the device list
XPress theÕbutton on the remote con-
trol.
XTo show the menu: press the :button
on the remote control.
XTo select Devices: press
the :=; buttons on the remote
control.
The discs/devices available are shown. The
# dot indicates the current setting.
XSelect the device/disc using the :9
buttons and press the 9button to confirm.
If the device/disc contains music or video
files, these will be played.
Music search
XSelect the preferred media source.
XPress button :on the remote control.
The menu is shown.
XSelect Searchusing the =; buttons
on the remote control and press the 9
button to confirm.
Further information on the music search
(
Ypage 220).
Audio/video mode
Important safety notes
GWARNING
The CD/DVD drive is a class 1 laser product.
If you open the housing of the CD/DVD drive,
there is a risk of exposure to invisible laser
radiation. This laser radiation could damage
your retina. There is a risk of injury.
Never open the housing. Always have main-
tenance and repair work carried out at a quali- fied specialist workshop.
General notes
You will find information on the following top-
ics in the Audio section:
Rnotes on CDs/DVDs (Ypage 213)
Rnotes on MP3 mode (Ypage 212)
Rnotes on copyright (Ypage 213)
Inserting a CD/DVD
:Disc slot
;Disc eject button
Depending on the vehicle model and equip-
ment level, the CD/DVD drive is found:
Rat the rear of the center console under the
automatic climate control panel or
Rbetween the parcel shelf and skibag.
The CD/DVD drive is a single disc drive. If
there is already a disc inserted, this must be
ejected before another is inserted.
XInsert a disc into the disc slot.
The printed side of the disc must face
upwards. If neither side of the disc is prin-
ted, the side you wish to play must face
downwards.
The CD/DVD drive draws in the disc.
286Audio/video mode
Rear Seat Entertainment System
Page 289 of 298
The CD/DVD drive plays the disc:
Rif it has been inserted correctly
Rif a permissible type of disc is used
Ronce you have activated disc mode
Data on an MP3 CD first needs to be loaded by
the drive. Loading may take some time,
depending on the number of folders and
tracks.
Switching to audio/video mode
XInsert a CD/DVD (Ypage 286).
The system loads the inserted disc and
starts playback.
or
XSelect Mediausing the 9=;
buttons on the remote control and press
the 9button to confirm.
XSelect Discusing the =; buttons
and press the 9button to confirm.
The system plays the disc.
XTo switch to other media: insert the
device into the corresponding jack.
The system searches for files on the device that can be played back, and then plays
them.
Selecting a track
Selecting by skipping to a track
XTo skip forwards or backwards to a
track: press the =or; button on
the remote control.
or
XPress the EorF button.
The skip forward function skips to the next
track.
If the elapsed track time has exceeded 8
seconds, the function skips back to the
beginning of the track. If the elapsed time is
shorter, it will skip to the start of the pre-
vious track. If the
Random Track List
orRandom
Mediumplayback option has been selected,
the tracks will be played in a random order.
Selecting by track list
In audio CD mode, the track list contains all
tracks on the disc currently playing.
In MP3 mode, the track list shows all tracks in
the currently active folder as well as the folder
structure, allowing you to select any track on
the MP3 CD.
XSelect Searchusing the :=;
buttons on the remote control and press
the 9button to confirm.
XSelect Current Track Listusing the
9: buttons and press the 9button
to confirm.
The track list appears. The #dot indicates
the current track.
XSelect the track using the 9:but-
tons and press the 9button to confirm.
Making a selection by entering the track
number directly
This function is only available in media mode.
XPress the hbutton on the remote con-
trol.
The track entry display appears.
Example: track 2
XPress number button 2.
Example: track 12
XPress the corresponding number keys in
rapid succession.
XWait for approximately three seconds after
making the entry.
You will hear the track which has been
entered. The corresponding basic menu
then reappears.
iIt is not possible to enter numbers that
exceed the number of tracks on the CD or in
the currently active folder.
Audio/video mode287
Rear Seat Entertainment System
Z
Page 291 of 298
radiation. This laser radiation could damage
your retina. There is a risk of injury.
Never open the housing. Always have main-
tenance and repair work carried out at a quali-fied specialist workshop.
General notes
DVD playback conditions
Playback problems may occur when playing
copied discs. There is a large variety of discs,
DVD authoring software, writing software and
writers available. This variety means that
there is no guarantee that the system will be
able to play video DVDs you have copied your-
self.
More information on the playback criteria
(
Ypage 240).
Function restrictions
Depending on the DVD, certain functions or
actions may be temporarily blocked or not
function at all. As soon as you try to activate
these functions, you will see the Ksymbol in
the display.
Switching on video DVD mode
XInsert a video DVD (Ypage 276).
The system loads the disc.
If disc mode was the last mode selected, it
will now be active.
XTo manually switch to video DVD mode:
press the Õbutton on the remote con-
trol repeatedly until the video DVD mode is
switched on.
If the video DVD fulfills the playback crite-
ria, the film starts automatically or the DVD
menu appears. If the DVD menu appears,
you must start the film manually.
XSelect the corresponding menu item in the
DVD menu.
Video menu
:Type of data medium
;Current title
=Shows the menu bars for the DVD basic
display
?Current scene
ATrack time
XTo show: press the9or: button on
the remote control.
XTo hide: press the 9or: button.
or
XWait about eight seconds.
Overview of DVD functions
:Activates DVD control menu
;Hides DVD functions
=Shows the DVD basic display
?Confirms entry in control menu
ANavigates DVD lists
BJumps to the start of the scene
CDisplays camera perspectives
DShows subtitles
Video DVD mode289
Rear Seat Entertainment System
Z