MERCEDES-BENZ SL-Class 2003 R230 Comand Manual

93 Telephone
Telephone operation
Dialing with COMANDRedial memory list1Memory locations L01 - L10
L01 the last number or name
dialed
L02 - L10 numbers or names dialed
previously

Turn the right-hand rotary/push-
button v to highlight “Last Calls” in
the main telephone menu and press to
confirm.
or
if there is a blank input line in the main
telephone menu

Press the right-hand rotary/push-
button v when the “Send” button is
highlighted.
The “Last Calls” menu will appear.

Turn the right-hand rotary/push-
button v to highlight the desired pho-
ne number or name and press to con-
firm.
The main telephone menu appears with
the desired phone number or name.
P82.85-9137-31
1
iIf there is no entry in the numbers list,
the message “No entry in list” appears
in the telephone menu.
P82.85-9138-31

94 TelephoneTelephone operationBegin dialing
Press the right-hand rotary/push-
button v to confirm the “Send” but-
ton.
The message “Dialing” will appear. The
“End” button is highlighted.
Ending a call, use one of the three ways:

Press the right-hand rotary/push-
button v to confirm the “End” button
or the call has been finished by the
other party.
or

Press a.
or

Press *.Dialing from calls list
Incoming calls memory
Turn the right-hand rotary/push-
button v to highlight “Calls” in the
main telephone menu and press to
confirm.
The incoming calls memory will appear.

Turn the right-hand rotary/push-
button v to select the desired phone
number or name and press to confirm.
The main telephone menu appears indi-
cating the number or name selected.
Begin dialing, ending a call, see above.
P82.85-9139-31

95 Telephone
Telephone operation
Speed-dialing (only with COMAND)
For all memory locations
You can enter up to 2 digits.
The main telephone menu is displayed.
Use the number keys, e.g. 1 and 4
to enter the memory location number.Begin dialing
Use one of these ways:

Press the last number key for more
than 2 seconds.
or

Press the right-hand rotary/push-
button v to confirm the “Send” but-
ton.
The phone number or name will appear
in the menu. The telephone will dial the
phone number that has been stored in
this memory location.
When the call is initiated, the call time
will appear.
P82.85-9140-31
Warning
G
If you enter “1” and confirm this memory lo-
cation using one of the described ways in
“Begin dialing”, the emergency number
9-1-1 (default input) will be dialed.
The 9-1-1 emergency call system is a public
service. Using it without due cause is a cri-
minal offense.
P82.85-9141-31

96 TelephoneTelephone operation
Ending a call (
page 94).Quick-dialing for the first 10 memory
locations
The main telephone menu is displayed.

Press 2 to 0 longer than 2 seconds.
The phone number or name will appear
in the menu. The telephone will dial the
phone number that has been stored in
this memory location.
When the call is initiated, the call time
will appear.

Ending a call (
page 94).
iIf the memory location called is free, the
message “Memory location not alloca-
ted” will appear.
P82.85-9142-31
Warning
G
If you press “1” the emergency number
9-1-1 (default input) will be dialed.
The 9-1-1 emergency call system is a public
service. Using it without due cause is a cri-
minal offense.

97 Telephone
Telephone operation
You can enter a telephone number in the
notebook or edit an existing one
during a conversation

in the main telephone menu without
having a callOpening the notebook
The main telephone menu is displayed.

Turn the right-hand rotary/push-
button v to highlight the “V” symbol
and press to confirm.
Other menu fields will appear.

Turn the right-hand rotary/push-
button v until “Notebook” is highligh-
ted and press to confirm.
Entering the telephone number

Press number keys 1 through 0, u
and t.
Correcting input
To delete only the last digit:

Press r briefly.
To delete the whole entry:

Press r longer than 2 seconds.Closing the notebook and storing input

Press *.
Dialing a telephone number from
the notebook

Open the notebook.

When the notebook phone number ap-
pears, press the right-hand rotary/
push-button v to confirm the “Send”
button.
Dialing begins.
Notebook
P82.85-9143-31
iYou can transfer the notebook phone
number to the phone book
(page 102).

98 TelephoneTelephone operationYou can edit the phone book and transfer
a phone number from the notebook.
In the main telephone menu, turn the
right-hand rotary/push-button v until
“Phone book” is highlighted and press
to confirm.
The “Phone book” selection menu will
appear.
“Phone book” selection menu1Changing entries in the phone book
2Adding entries in the phone book
(
page 101)
3Transferring a telephone number from
the notebook (
page 102)Changing entries in the phone book

Turn the right-hand rotary/push-
button v to highlight 1 and press to
confirm.
The phone book will either display
the list of names sorted alphabeti-
cally

the list of phone numbers sorted by
memory locations.
Editing the phone book
P82.85-9144-31
3
1
2
P82.85-7589-31

99 Telephone
Telephone operation
Changing a name
4Phone book entry selected
5Character list
6The character selected appears magni-
fied
7Confirms the changed entry
8Deletes the entry
Turn the right-hand rotary/push-
button v to highlight the desired pho-
ne book entry and press to confirm.
An input menu appears.

Turn the right-hand rotary/push-
button v to highlight the desired let-
ters one by one and press to confirm.
The name will appear in the input line.
The input cursor indicates the current
input position.
Correcting an input
Deleting the last digit

Press r briefly.
Deleting the whole entry

Press r longer than 2 seconds.Input with number keys

Select a character by pressing the key
as listed below the corresponding num-
ber of times.
P82.85-9145-31
4
5
6
7
8
iYou can enter up to 20 characters.iYou can also select characters using the
number keys. Each number key has
more than one assignment. See table.
Key
Character
1
,
.
-
1
:
‘
/
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M
N
O
6
7
P
Q
R
S
7
8
T
U
V
8
9
W
X
Y
Z
9
0
0
u
Blank

100 TelephoneTelephone operationThe selected character is automatically ad-
opted in the input line after 2 seconds
or
Press t or turn the right-hand rotary/
push-button v.
Storing changed names
Use one of these ways:

Turn the right-hand rotary/push-
button v until “Apply” is highlighted
and press to confirm.
or

Press the right-hand rotary/push-
button v longer than 2 seconds to
confirm the last letter of the name.
Now change the phone number.
If you do not wish to save the changes

Press *.Changing a telephone number
9Current name or name previously chan-
ged (light brown)
appears only if you have entered a
name for the telephone number
aInput line, highlighted when activated
bStores a telephone number in the pho-
ne bookEntering a telephone number

Press the number keys 1 through 0,
u and t.
The telephone number appears in a.
Correcting input

Deleting last digit
Press r briefly.

Deleting the whole entry
Press r longer than 2 seconds.
Storing the phone number in the phone
book

Turn the right-hand rotary/push-
button v until b is highlighted and
press to confirm.
The main telephone menu will appear.
P82.85-9146-31
910
11

101 Telephone
Telephone operation
Deleting an entry in the phone book
1Name and telephone number of the
entry to be deleted (light brown)
2Query (light brown)
3COMAND will delete the entry from the
phone book
4The entry remains in the phone book

Turn the right-hand rotary/push-
button v to highlight “Delete” in the
input menu (
page 99) and press to
confirm.
The query 2 appears. “Yes” is high-
lighted.

Press the right-hand rotary/push-
button v and confirm “Yes”.
The main telephone menu appears. The
entry is deleted.
If you do not want to delete the entry:

Turn the right-hand rotary/push-
button v to highlight “No” and press
to confirm.
The phonebook list will appear. Adding an entry to the phone book
Entering a name
1Input line
2Transfers name
P82.85-9147-31
3
4
1
2
P82.85-9148-31
1
2

102 TelephoneTelephone operation
While in the selection menu
(page 98), turn the right-hand rota-
ry/push-button v until “Add an ent-
ry...” is highlighted and press to
confirm.
An input menu will appear.

Turn the right-hand rotary/push-
button v until the desired character is
highlighted and press to confirm.

Repeat this action.
The name will appear in the input line.
Confirm the name as described under
“Storing changed names”
(page 100).

Now change the phone number.
Correcting an input (
page 99). Entering and storing a telephone num-
ber
3Previously entered name
4Input line for phone number, entering
phone number with numeric keys 1 to
0, keyu and key t
5COMAND stores the phone number

Press the right-hand rotary/push-
button v to confirm the input.
COMAND stores the phone number
and the main telephone menu will ap-
pear.
Storing a phone number in the note-
book

While in the “Phone book” selection
menu (
page 98), turn the right-hand
rotary/push-button v to highlight
“Copy notebook...” and press to con-
firm.

Now you can enter a new name and
phone number or edit an existing entry,
and store the entry.
P82.85-9149-31
3
4
5