instrument cluster MERCEDES-BENZ SLK-Class 2007 R171 Comand Manual

98 Telephone*
Telephone operation
Switching between number and name dis-
play:
Press the 123 soft key.
The list switches to number display.
If for a highlighted number a name is
stored in the phonebook, the name is
shown in the status bar.
Press the ABC soft key.
The list switches to name display.
The number in the phone book that be-
l o n g s t o t h e hi g hl i g h t e d n a m e is s h o w n
in the status bar.Selecting a list entry and establishing the
connection:
Use% or & to select the desired
entry.
Press2.
The telephone initiates the call to the
selected number.
On the multifunction steering wheel
Opening the list:
Switch the multifunction display in the
instrument cluster to the Telephone
main display (
page 27).
Presss once.
The last dialed call is displayed on the
multifunction display.Selecting a list entry and establishing the
connection:
Pressj or k repeatedly until
the desired entry is shown on the mul-
tifunction display.
Presss .
The telephone initiates the call to the
selected number.
On the cell phone a maximum of 10 tele-
phone numbers can be stored in a speed
dial memory (
Telephone Operation
Guide).
You can retrieve the entries of the speed
dial memory via COMAND.
Open the Telephone main menu
(
page 92).
i
If you presss twice, the telephone
will immediately establish a connection
with the phone number dialed last.
Speed dial

99 Telephone*
Telephone operation
Press a number key between! and
= and hold it for more than approx.
2 seconds.
The telephone establishes the connec-
tion with the stored number.
The call is activated the moment the other
party answers the call. The call display ap-
pears. The duration of the call is displayed
in the status bar.A call screen is displayed if the multifunc-
tion display in the instrument cluster is
switched to Telephone main display
(
page 28).
The following functions are available dur-
ing a call:
Ending the active call
Switching the hands-free microphone
ON/OFF
Transmitting number sequencesEnding the active call
On the COMAND control unit
Press3.
On the multifunction steering wheel
Presst .
Switching the hands-free microphone
ON/OFF
The soft key
Mic Off shows the status of
the microphone.
Microphone OFF: soft key =
Microphone ON: soft key =
Press the Mic Off soft key.
The microphone switches OFF or ON.
The display of the soft key changes ac-
cordingly.
The other party cannot hear you if the
microphone is switched OFF; however,
you can hear the other party.
Active call

101 Telephone*
Phone book

Phone book
The phone book contains all entries of the
cell phone memory.

On the COMAND control unit
Press the soft key in the Telephone
main menu (
page 92).
The Phone Book menu appears. The
first list entry is highlighted automati-
cally.On the multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the Telephone
main display (
page 28).
Pressj or k.
A phone book entry appears on the
multifunction display.An example for the Phone Book menu is
shown above. It shows a list of the phone
book entries whose names start with the
letter
B. Displayed in the status bar is the
number of the highlighted name, in this ex-
ample 18005551212.i
If a GSM phone is used, the phone book
contains all entries of the telephone
phone book.
Opening the phone book
i
If no numbers are stored in the phone
book, the soft key is shaded out
and without function.
Phone Book menu
i
Various icons may be assigned to the
phone numbers, depending on the en-
try made on the telephone:
Home number
Work number
Fax number
Main number
Mobile number
Pager number
In the instrument cluster the name of
the category assigned to the phone
number, e.g.
Home, appears in the multi-
function display.

103 Telephone*
Phone book
On the multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the Telephone
main display (
page 28).
Pressj or k repeatedly until
the desired entry is shown in the multi-
function display.
Presss .
The telephone initiates the connection
with the selected number.
Select the phone book entry to be de-
leted from COMAND (
page 102).
Press the Delete soft key.
The delete prompt is displayed.
Use# to select the menu item Yes.
Press'.
The entry is deleted.
Deleting a phone book entry

168 System
System settings
Setting the format
Use% or & to select a format.
Press'.
The appropriate format is selected.
Press the Back soft key or wait for the
screen to change.
The new setting is stored.
The language setting changes the display
language as well as the language used for
voice instructions in navigation announce-
ments.
In the System menu (page 166),
press the
Lang. soft key.
The language list is displayed.
The following options are available:
Instr. cluster settings:
The system switches to the language
already set in the vehicle instrument
cluster (
Vehicle Operator’s manual);
All other options:
The system switches to the requested
language.
Use% or & to select an entry.
Press'.
Press the Back soft key or wait for the
screen to change.
The new setting is stored.
In the System menu, press the
(
page 166) Tones soft key.
The list of available sounds is dis-
played.
i
List entry 1-3: Date formats
List entry 4 and 5: Time formats
(Entry 5 is not visible on the display ex-
ample below.)
Solid circle : format set
Empty circle : format not set
Setting the language
Switching confirmation beeps and
acoustic signals ON/OFF