MINI COOPER CONVERTIBLE 2018 Owners Manual

the rain sensor, and will be displayed depend~ing on the situation.
With the navigation system, the system takes into account the information stored in the navi~
gation data and also displays speed limits
present on routes without signs.
Without a navigation system, the system is sub~
ject to limitations imposed by technology. Traf~
fic signs with speed limitations are detected
and displayed only. Speed limitations due to
entering or exiting towns, highway signs, etc.
are not displayed. Speed limits with extra text
characters are always displayed.
Safety
information WARNING
The system does not relieve from per~
sonal responsibility to assess visibility and traffic situation. There is a risk of an accident. Adjust
driving style to traffic conditions. Watch traffic
closely and actively intervene where appropri~ ate. '

'

Information is displayed in the Info Display of
the instrument cluster.
Information
at
a
glance
Info
Display Repeatedly pressing the buttonon the turn signal lever calls upthe following information in the
Info Display:'

Engine
temperature
displayDisplays the current engine temperature, based
on a combination of coolant and engine oil
temperature. As soon as the optimum operat~ ing temperature has been attained, the indica~tor is in the center position.
If the engine oil or coolant, and thus the en~
gine, become too hot, a Check Control message is displayed too.
When the engine temperature is toohigh, a red indicator light is displayed.
When the engine oil temperature is too high, a red indicator light is displayed.
Check the coolant level, refer to page 227.
Always
Open
Timer The Always Open Timer displays the current
driving time and total driving time with the
convertible top open in minutes and hours.
Always Open Timer via the Central Information
Display (CID), refer to page 110.
Reset
the
Always
Open
Timer
Reset the current driving time: press button on the turn signal lever for approx. 2 seconds with
the driving times displayed.
With
equipment
version
with
Head-up
Display
and
navigation:
distance
to
destination
The distance remaining to the destination is
displayed if a destination is entered in the navi~
gation system before the trip is started.
The distance to the destination is adopted au~
tomatically.
With
equipment
version
with
Head-up
Display
and
navigation:
time
of
arrival
The estimated time of arrival is displayed if a destination is entered in the navigation systembefore the trip is started.
The time must be correctly set.
Speed
Limit
Info Speed Limit Info shows the current maximum
permitted speed in the instrument cluster.
Onboard
Computer
on
the
Control
Display
Concept The Onboard Computer displays different vehi~cle data on the Control Display, such as average values.
General
information
The vehicle features two types of Onboard Computers.'

Resetting
the
Onboard
ComputerVia the Central Information Display (CID):1. "Vehicle info"2."Onboard info"3."Consumpt." or "Speed"4."Yes"
Resetting
the
trip
computerVia the Central Information Display (CID):
1. "Vehicle info"2."Trip computer"3."Reset": all values are reset.
"Automatically reset": all values are reset approx. 4 hours after the vehicle has cometo a standstill.
Driving
Excitement
Concept On the Control Display, sport instruments canbe displayed, and the vehicle state can be checked before the use of the SPORT program.
Sport
instruments
General
information
On the Control Display, values for power and torque are displayed.
Displaying
sport
instruments
Via the Central Information Display (CID):
1. "Vehicle info"2."Driving Excitement"3. "Sports instruments"
Via MINI Driving Modes switch:
1.Activate SPORT.2. "Driving Excitement"3. "Sports instruments"Vehicle
state
The following vehicle and surrounding area
data is automatically checked and evaluated in succession:'

4.Turn the Controller until the desired speedwarning is displayed.5.Press the Controller.
Activating/deactivating
the
speed
warning
Via the Central Information Display (CID):
1. "Settings"2."Speed"3."Warning"4.Press the Controller.
Setting
your
current
speed
as
the
speed
warning
Via the Central Information Display (CID):
1. "Settings"2."Speed"3."Select current speed"4.Press the Controller.
Settings
on
the
Control
Display
Time
Setting
the
time
1. "Settings"2."Time/Date"3."Time:"4.Turn the Controller until the desired hours
are displayed.5.Press the Controller.6.Turn the Controller until the desired mi~ nutes are displayed.7.Press the Controller.
The time is stored.
Setting
the
time
format1. "Settings"2."Time/Date"3."Format:"4.Select the desired format.
The time format is stored.
Date
Setting
the
date
1. "Settings"2."Time/Date"3."Date:"4.Turn the Controller until the desired day is
displayed.5.Press the Controller.6.Make the settings for the month and year.
The date is stored.
Setting
the
date
format
1. "Settings"2."Time/Date"3."Format:"4.Select the desired format.
The date format is stored.
Language
Setting
the
language
1. "Settings"2."Language/Units"3."Language:"4.Select the desired language.
Settings are stored for the profile currently
used.
Setting
the
voice
dialog Voice dialog for the voice activation system, re~
fer to page 29.
Seite 106CONTROLSDisplays106
Online Edition for Part no. 01402983394 - X/17

Units
of
measurement
Setting
the
units
of
measurement
To set the units for fuel consumption, route/
distance and temperature:1. "Settings"2."Language/Units"3.Select the desired menu item.4.Select the desired unit.
Settings are stored for the profile currently
used.
Brightness
Setting
the
brightness To set the brightness of the Control Display:
1. "Settings"2."Control display"3."Brightness at night"4.Turn the Controller until the desired bright~ness is set.5.Press the Controller.
Settings are stored for the profile currently
used.
Depending on the light conditions, the bright~ ness settings may not be clearly visible.
LED
ring
on
the
central
instrument
cluster
ConceptThe LED ring displays light animations to repre~sent specific functions.
Basic
displays
Basic functions, for instance the tachometer, can be set to be displayed continually if so de~sired.
Event
displays
Functions that are only displayed temporarily,
for instance the volume or temperature set~
tings, can be set as event displays.
Several vehicle assistance functions can also be
displayed on the LED ring. This display corre~
sponds with the displays of the function in the
respective display.
Example:
tachometer
Like the tachometer in the instrument cluster, the light animations of the tachometer's basic
display show the current RPMs and the respec~
tive RPM warning thresholds.
Display'

Setting
the
brightnessThe brightness can be adjusted when night
lighting is active in the instrument cluster.
Via the Central Information Display (CID):1. "Settings"2."Center Instrument"3."Brightness at night"4.Turn the Controller.
Settings are stored for the profile currently
used.
Head-up
Display
Concept This system projects important information into
the driver's field of vision, for instance the
speed.
The driver can get information without averting
his or her eyes from the road.
General
information
Follow the instructions for cleaning the Head-
up Display. For additional information, see the
chapter on care.
Safety
information WARNING
When extending and retracting the pro~
jection screen of the Head-up Display, body
parts can be jammed. There is a risk of injury.
Make sure that the area of movement of the
projection screen is clear during opening and
closing. '

Selecting
displays
in
the
Head-up
Display
Via the Central Information Display (CID):1. "Settings"2."Head-Up Display"3."Displayed information"4.Select the desired displays in the Head-up
Display.
Settings are stored for the profile currently
used.
Setting
the
brightness The brightness is automatically adjusted to the
ambient brightness.
The basic setting can be adjusted manually.
Via the Central Information Display (CID):
1. "Settings"2."Head-Up Display"3."Brightness"4.Turn the Controller until the desired bright~ ness is set.5.Press the Controller.
When the low beams are switched on, thebrightness of the Head-up Display can be addi~tionally influenced using the instrument light~ing, refer to page 115.
Settings are stored for the profile currently
used.
Adjusting
the
height Via the Central Information Display (CID):
1. "Settings"2."Head-Up Display"3."Height"4.Turn the Controller until the desired heightis reached.5.Press the Controller.
Settings are stored for the profile currently
used.
Setting
the
rotation
The screen of the Head-up Display can be ro~
tated around its own axis.
Via the Central Information Display (CID):1. "Settings"2."Head-Up Display"3."Rotation"4.Turn the Controller until the desired setting
is selected.5.Press the Controller.
Settings are stored for the profile currently
used.
Display
visibility The visibility of the displays in the Head-up Dis~play is influenced by the following factors:
'

Display1Speed2Shift point indicator3Gear display4Current engine speed5Warning field, speed
Shift
point
indicator
Concept
Shift point indicator in the Head-up Display in~
dicates the optimum shifting point. Thus, with a
sporty driving style, the best possible vehicle
acceleration is achieved.
Functional
requirements
'