lock MITSUBISHI ECLIPSE 2003 Service Workshop Manual

AC106480
CONNECTORS: C-111, C-112
AG
C-111
C-112
C-112
C-111
1
72
83
910114
125
136
14
2 1
6 4 35
JUNCTION BLOCK
(FRONT VIEW)
DEVICE SIDE
AC106491AQ
CONNECTOR
<ECLIPSE SPYDER>: F-35
DEVICE SIDE
AC106903AB
HARNESS SIDE
F-35

JUNCTION BLOCK
(FRONT VIEW)
AC102581
DEFOGGER RELAY
AB

AC106552AK
CONNECTOR : C-09
AC106477
CONNECTORS : C-78, C-89
C-89
C-78
AJ
AC106479
CONNECTORS: C-108, C-111, C-112
AT
JUNCTION BLOCK
(FRONT VIEW)
C-108
C-112C-111

AC106557AY
CONNECTOR : C-09
DEVICE SIDE
1
112
123
134
145
156
167
178
189
1910
20
AC106473
CONNECTOR: C-78
AM
1
12
232
13
243
14
254
15
265
16
276
17
287
18
298
19
309
20
3110
21
3211
22
33
DEVICE SIDE
AC106480
CONNECTORS: C-108, C-111
AO
C-108
C-108
1
152
163
174
185
196
207
218
229
2310
2411
2512
2613
2714
28
C-111
JUNCTION BLOCK
(FRONT VIEW)
DEVICE SIDE
C-111
2 1
6 4 35

AC106557AY
CONNECTOR : C-09
DEVICE SIDE
1
112
123
134
145
156
167
178
189
1910
20
AC106473
CONNECTOR: C-78
AM
1
12
232
13
243
14
254
15
265
16
276
17
287
18
298
19
309
20
3110
21
3211
22
33
DEVICE SIDE
AC106480
CONNECTORS: C-111, C-112
AG
C-111
C-112
C-112
C-111
1
72
83
910114
125
136
14
2 1
6 4 35
JUNCTION BLOCK
(FRONT VIEW)
DEVICE SIDE

AC102625
AC
Ambient Temperature Sensor Circuit
AC106465
CONNECTOR: A-29
AX
AC106552AK
CONNECTOR : C-09
AC106477
CONNECTOR: C-89
AD
CONNECTOR BLOCK (LH)

AC106465
CONNECTOR: A-29
AW
DEVICE SIDE
AC106557AY
CONNECTOR : C-09
DEVICE SIDE
1
112
123
134
145
156
167
178
189
1910
20
AC106477
CONNECTOR: C-89
AC
CONNECTOR BLOCK (LH)

AC003587
Indicates a splice point number.
The splice point numbers are identical to those in &#34;CIRCUIT DIAGRAMS,&#34; making them easy to use.
In addition, the splice point numbers are usually numbered clockwise.
Example: S 013
Sequential number
Prefix meaning splice point
S013
S014
AB
S015 S016
S033
S032
S031

AC106603
Indicates power source.
Indicates that terminal is conne-
cted via a plate in the relay box.
Each circuit diagram consists of
block(s). The blocks are divided
by page number.
Indicates splice point numbers.
These numbers are identical to
those described in &#34;Splice Loca-
tions.&#34;
Indicates the circuit name to be
connected. The arrow indicates
the current flow direction.
Indicates the power suppply in
the control unit. If no voltage is
displayed, this indicates battery
positive voltage.
An &#34;X&#34; at the end of a connector
number indicates that the conn-
ector is connected to a central-
ized junction that is shown in the
section &#34;Centralized Junction.&#34;
Indicates the connector symbol.
Connectors in the circuit diagram
are indicated in numerical order.
Indicates the operating conditions
of the engine coolant switch, etc.
Indicates connector number.
The same number as used in the
wiring harness diagram.
Connector and connector numbers
are shown at the lower part of the
page.
Connector numbers not enclosed
by frame indicate the device incor-
porated into wiring harness.
Indicates the circuit mame
to be connected. The arrow
indicatesthe current flow
direction.
Indicates that the diagram contin-
ues at which belongs to the
block in the same circuit.
AB
Indicates shield wire.Indicates that current
flows upwards.

AC106604
Indicates that the terminal is a
spare one if the device (sensor
in this case) is not provided.
Indicates representative vehicle
body ground point. (Same
number as that of ground point in
GROUNDING LOCATION).
Indicates harness junction where
wire diameter or color changes.
In case two or more connectors
are connected to the same de-
vice, markings indicating the
same connector are connected
by a broken line.
Indicates terminal number.
A broken line indicates that these
connectors are the same interm-
ediate connectors.
Indicates intersections at
which the lead wires are
not connected.
Indicates intersections at
which the lead wires are
connected.
Indicates input/output
to/from control unit
(current flow direction).
InputOutputInput/
output
Indicates current flow downward
or upward as controlled by the
control unit.
AB
Indicates that the diagram comes
from which belongs to the
block in the same circuit.
Indicates a wiring connector which is inside
the equipment and which is not shown in
the wiring harness configuration diagram.
Example C-15-2
Indicates a connector
which is inside the
equipment, numbered
in order starting from 1.
Indicates the connector number shown in
the wiring harness configuration diagram.