display NISSAN GT-R 2011 Owners Manual

Black plate (113,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Move Location:Adjusts the location of the Avoid Area.1. Highlight [Move Location] and push<EN-
TER>.
2. Adjust the location of the Avoid Area.
3. After adjusting the location, push <EN-
TER>.
Resize Area:Adjusts the range of the Avoid Area.1. Highlight [Resize Area] and push <EN-
TER>.
2. Highlight the range from 5 available levels.
3. After highlighting the range, push <EN-
TER>.
FWY:Sets the route to avoid freeways.1. Highlight [FWY].
To include freeways in the Avoid Area, push
<ENTER> to illuminate this indicator.2. The Avoid Area is displayed in green if it
includes a freeway or in blue if it does not
include a freeway.
Navigation
2-87

Black plate (114,1)
Model "R35-N" EDITED: 2009/ 10/ 30
INFO:
If the current vehicle location is set to an Avoid
Area, the system will not provide route guidance.
Delete:Deletes the Avoid Area.1. Highlight [Delete] and push <ENTER>.2. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>. The stored item
is deleted from the Address Book.
DELETING STORED ITEMThe locations and routes in the Address Book
can be deleted. Two deletion methods are
available: deleting an individual item and delet-
ing all stored items.
NOTICE
Deleted items cannot be restored. Be-
fore deleting an item, always make sure
that the item is truly not necessary.Deleting stored item individuallyYou can delete stored addresses, routes, track-
ing and avoid areas individually.1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push <EN-
TER>.
Example: [Stored Location] is highlighted.
4. Highlight the preferred item for deletion and push <ENTER> .
2-88
Navigation

Black plate (115,1)
Model "R35-N" EDITED: 2009/ 10/ 30
5. Highlight the preferred location/route fordeletion and push <ENTER>.6. Highlight [Delete] and push <ENTER>.
7. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>. The stored item
is deleted from the Address Book.Other settings:A stored address can also be deleted using the
following procedure.1. Push <DEST>.
2. Highlight [Address Book] and push <EN-
TER>. 3. Highlight [Store/Edit] and push
<ENTER>.
4. Highlight [Edit or Delete an Entry] and push <ENTER> .
5. Highlight a preferred address and push <ENTER> .
“SETTING DESTINATION” page 2-23INFO:
This procedure applies only for deleting a stored
home or address. A stored route, tracking or
avoid area cannot be deleted using this proce-
dure.
Navigation
2-89

Black plate (116,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Deleting individual item on map1. Align the cross pointer over the preferredstored location for deletion by moving on the
map. Then push <ENTER>.2. Highlight [Delete] and push <ENTER>.3. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>.
The stored item is deleted from the Address
Book.
Deleting all stored items1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.3. Highlight [Address Book] and push <EN-
TER>.
4. Highlight [Delete Stored Items] and push <ENTER> .5. Highlight the preferred item for deletion and
push <ENTER> .
Items that can be deleted
. [Delete Home Location]:
Deletes the home location.
. [Delete Address Book]:
Deletes all stored locations.
2-90
Navigation

Black plate (117,1)
Model "R35-N" EDITED: 2009/ 10/ 30
.[Delete Stored Routes]:
Deletes all stored routes.
. [Delete Current Tracking]:
Deletes the current tracked route.
. [Delete Stored Tracking]:
Deletes all stored tracked routes.
. [Delete Avoid Areas]:
Deletes all stored Avoid Areas.
. [Delete Stored Voicetags]:
Deletes all stored Voicetags.
. [Delete Previous Destinations]:
Deletes all or one of the previous
destinations.
. [Delete Previous Start Point]:
Deletes all previous start points.
. [Delete Learned Route]:
Deletes all system learned routes.
6. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>. The stored items
are deleted from the Address Book.Other settings:All stored addresses can also be deleted using
the following procedure.1. Push <DEST>.
2. Highlight [Address Book] and push <EN-
TER>.
3. Highlight [Store/Edit] and push <ENTER>.
4. Highlight [Delete All Addressbook Entries] and push <ENTER> .
“SETTING DESTINATION” page 2-23INFO:
This procedure applies only for deleting a stored
home or address. A stored route, tracking or avoid area cannot be deleted using this proce-
dure.
TRANSFERRING INFORMATION TO/
FROM ADDRESS BOOKThe information of the stored home and ad-
dresses can be exported and imported using a
USB memory.1. Insert a USB memory and push
<SET-
TING> .
INFO:
Refer to the vehicle Owner’s Manual for the
location of the USB connector.
2. Highlight [Navigation] and push <ENTER>.
Navigation
2-91

Black plate (119,1)
Model "R35-N" EDITED: 2009/ 11/ 6
displayed. Once overwritten, the original data
cannot be recovered.
The navigation system can be set in details to
meet the preference.BASIC OPERATION1. Push<SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight the preferred setting item and push <ENTER> .
Available setting items
. [Address Book]:
Store locations and routes, and edit the
stored items.
“STORING LOCATION” page 2-71
. [Map View]:
Set the display method and the direction of
the map.“CHANGING MAP VIEW” page 2-11 .
[Map Icons]:
Set the map icons to display on the map.
“Displaying map icons” page 2-16
. [Guidance Settings]:
Set the various functions for the route
guidance.“Guidance settings” page 2-61
. [Route Settings]:
Change the routing preferences.“Detailed route settings” page 2-66
. [Traffic Info Settings]:
Set the various functions of the XM Nav-
Traffic®information system.“TRAFFIC INFORMATION SET-
TINGS” page 6-12
. [Weather Info Setting]:
Set the functions of the XM NavWeather
TM
information system.
“Weather information settings” page
6-22
. [Speed Limit Info]:
Display speed limit information.“SPEED LIMIT INDICATION ON MAP”
page 2-94
. [Others]:
Display other setting items.“OTHER NAVIGATION SETTINGS”
page 2-94
Navigation
2-93
NAVIGATION SETTING

Black plate (120,1)
Model "R35-N" EDITED: 2009/ 11/ 6
.[Delete Stored Information]:
Delete stored locations and the home
setting in the Address Book.
“DELETE STORED ITEMS” page 2-98
. [Delete All Previous Destinations]:
Delete all previous destinations.“DELETE STORED ITEMS” page 2-98
. [Delete Previous Starting Point]:
Delete all previous starting points.“DELETE STORED ITEMS” page 2-98
. [Reset All Navigation Settings to Default]:
Reset all of the settings to default.“RESET ALL NAVIGATION SETTINGS
TO DEFAULT” page 2-98
SPEED LIMIT INDICATION ON MAPTurn the [Speed Limit Info] display on or off. The
indicator light illuminates when the speed limit
display function is set to on.1. Highlight [Speed Limit Info] and push <ENTER> .2. Highlight [Speed Limit Indication on Map] to
toggle the function between on and off. The
indicator light illuminates when the speed
limit display function is set to on.
OTHER NAVIGATION SETTINGSBasic Operation1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Others] and push <ENTER>.
4. Highlight the preferred setting item and push <ENTER> .
Available setting items
. [Audio Display on Map]:
Allows the audio information to be displayed
at all times.
“Displaying audio information on map
screen” page 2-95
. [Small Step Zoom by Dial]:
Sets the free zoom function on or off. When
this setting is on, it is possible to adjust the
scale in smaller steps than with normal scale
adjustment.
2-94
Navigation

Black plate (121,1)
Model "R35-N" EDITED: 2009/ 10/ 30
.[Map Scrolling Information]:
Sets the system so that when the map
scrolls the information about the location
aligned at the center of the cross pointer is
displayed.
“Map scrolling information” page 2-18
. [Customize Nearby Places]:
Set the category of frequently visited land-
marks.“Customizing Nearby Places” page 2-
95
. [Keyboard Type]:
Switches the keyboard layout for the char-
acter input screen.“Settings keyboard layout of character
input screen” page 2-96
. [North Up when Zoom Out]:
When this setting is ON, the orientation of
the map is automatically changed to North
Up when the widest map scale is selected.
The orientation is changed to North Up even
when Heading Up is set.
. [Adjust Current Location]:
Corrects the position of the current location.“Adjusting current vehicle location”
page 2-97
Displaying audio information on
map screenThe operating status of audio functions can be
displayed on the map screen.1. Highlight [Others] and push <ENTER>.
2. Highlight [Audio Display on Map] and push <ENTER> . The indicator illuminates when
the item is set.
3. Push <MAP>to return to the current
location map screen.
4. On the bottom of the map screen, the
operating status of an audio/visual function
is displayed at all times.Customizing Nearby PlacesThe categories can be customized for searching
places of interest nearby.
The modified list of places of interest can be
used for searching for a location using [Places].
“FINDING PLACE” page 2-26
1. Highlight [Others] and push <ENTER>.
2. Highlight [Customize Nearby Places] and push <ENTER> .
Navigation
2-95

Black plate (122,1)
Model "R35-N" EDITED: 2009/ 10/ 30
3. Highlight the preferred item and push<ENTER> . The main category list is dis-
played.4. Highlight a main category and push <EN-
TER>. The sub category list is displayed.
Highlight [Category Search] and push <EN-
TER>. The preferred category can also be
input directly.
5. Highlight a sub category and push <EN-
TER>. The category setting is modified.
6. Push <MAP>to return to the current
location map screen.Settings keyboard layout of charac-
ter input screenDepending on the user’s preference for the
keyboard layout of character input screen, the
ABC layout or QWERTY layout can be selected.
Example: Switching to the QWERTY layout
1. Highlight [Others] and push <ENTER>.
2. Highlight [Keyboard Type] and push <EN-
TER>.3. Highlight [QWERTY] and push <ENTER>.
The indicator illuminates when the item is
set.
4. Push <MAP>to return to the current
location map screen.
ABC layout
2-96
Navigation

Black plate (123,1)
Model "R35-N" EDITED: 2009/ 10/ 30
QWERTY layout
Adjusting current vehicle locationIf the vehicle icon indicating the current vehicle
location is not in the correct position, the
location of the vehicle icon on the map screen
can be adjusted.
INFO:
. Regardless of the map view setting, the map
is displayed in Plan View when adjusting the
position of the vehicle icon.
. When correcting the position of the vehicle
icon, the map is automatically displayed in
the North Up mode. After finishing the
correction, the map restores the current
orientation setting.
. The position and direction of the vehicle icon
may be misaligned depending on the
external conditions and environment.
. If the vehicle icon is misaligned, drive for a while in a location where the GPS signals
can be received. This may correct the
position of the vehicle icon.
“VEHICLE ICON” page 11-4
1. Highlight [Others] and push
<ENTER>.
2. Highlight [Adjust Current Location] and push <ENTER> . The current location map
screen is displayed.3. Adjust the position of the vehicle icon. After adjusting the position of the vehicle icon, push
<ENTER>.
4. Adjust the direction of the vehicle icon.
After adjusting the direction of the vehicle
icon, push <ENTER>.5. A message is displayed, and the adjusted
vehicle location is stored.
Navigation
2-97