navigation NISSAN GT-R 2011 Manual Online

Black plate (97,1)
Model "R35-N" EDITED: 2009/ 10/ 30
[].
. [Town Road]:
Adjust the average vehicle speed on a town
road by moving the main directional buttons
or the center dial in the direction of [+] or
[].
. [Residential]:
Adjust the average vehicle speed in a
residential area by moving the main direc-
tional buttons or the center dial in the
direction of [+] or [ ].
. [Reset]:
Sets the average vehicle speeds to the
default values.
STORING LOCATIONOften visited locations can be stored in the
Address Book. The stored addresses can be
easily retrieved to set them as a destination or
waypoint.
INFO:
. The Address Book can store up to 300
locations.
. New information placed in the same storage
position will overwrite the old data.
Storing location by searchingAfter a location is searched for once, it can be
stored for future use.
1. Push <SETTING> .2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push <EN-
TER>.4. Highlight [Stored Location] and push <EN-
TER>.
Navigation
2-71
STORING A LOCATION/ROUTE

Black plate (98,1)
Model "R35-N" EDITED: 2009/ 10/ 30
5. Highlight [Home Location (None)] or [AddNew] and push <ENTER>.6. Highlight the appropriate method to search
for a location and push <ENTER>.
“SETTING DESTINATION” page 2-23
7. When a preferred location is displayed at
the center of the map, confirm the address
of the location and push <ENTER>.
A message is displayed, and the address of
the location is stored in the Address Book.8. Adjust the location of the stored item and edit the contents of the stored item as
necessary. After finishing the setting, high-
light [OK] and push <ENTER>.
INFO:
. When the location is stored in the
Address Book, [Address Book] can be
used to search for the location.
. A location can be adjusted by selecting
[Move Location] using the same method
as the one for a destination.
“Moving location of destination”
page 2-46
Other settings:An address can also be stored using the
following procedure.1. Push <DEST>.
2. Highlight [Address Book] and push <EN-
TER>.
3. Highlight [Store/Edit] and push <ENTER>.
4. Highlight [Add New] and push <ENTER>.
2-72
Navigation

Black plate (99,1)
Model "R35-N" EDITED: 2009/ 10/ 30
5. Highlight the appropriate method to searchfor a location and push <ENTER>. The
address of the searched location is stored.
“SETTING DESTINATION” page 2-23
Storing current vehicle location1. Push <MAP>to display the current loca-
tion map screen.
2. Push <ENTER> at the current vehicle
location.3. Highlight [Store Location] and push <EN-TER>. A message is displayed, and the
current vehicle location is stored in the
Address Book.
4. The icon representing the stored location is
displayed on the map.
Push <MAP> or<BACK> to return to the
current location map screen.
INFO:
The location is stored in the first available
position number in the Address Book list.
Storing location by moving map1. Move to the preferred location on the map and push <ENTER> .2. Highlight [Store Location] and push <EN-
TER>. A message is displayed, and the
address of the location is stored in the
Address Book.
Navigation
2-73

Black plate (100,1)
Model "R35-N" EDITED: 2009/ 10/ 30
3. The icon representing the stored location isdisplayed on the map.
Push <MAP> to return to the current
location map screen.
INFO:
The address is stored in the first available
position number in the Address Book list.
STORING ROUTEA maximum of 5 calculated routes can be
stored. Stored routes can be easily retrieved
and set as the suggested route.
INFO:
Stored route includes only locations (destination
and waypoints) and route calculation conditions,
not the route itself.
1. Push <ROUTE VOICE> .
2. Highlight [Route Info] and push <ENTER>.3. Highlight [Store Route] and push <EN-
TER>.
4. A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push <ENTER>.
The current route is stored.Other settingsA route can also be stored using the following
procedure.1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push <EN-
2-74
Navigation

Black plate (101,1)
Model "R35-N" EDITED: 2009/ 10/ 30
TER>.
4. Highlight [Stored Routes] and push <EN-
TER>.
5. Highlight [Store Current Route] and push <ENTER> .
6. A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push <ENTER>. The current
route is stored.
INFO:
. The route is stored in the first available
position number in the store current route
list.
. A maximum of 5 routes can be stored. When
5 routes are stored in the Address Book, a
new route cannot be stored until a route is
deleted.“DELETING STORED ITEM” page 2-
88
. If any waypoints are not set on the route, the
route cannot be stored.
STORING TRACKED ROUTEA travelled route up to the current location can
be stored. A maximum of 5 tracked routes can
be stored.
1. Push <MAP>to display the current loca-
tion map screen.
2. Push <ENTER> at the current vehicle
location.3. Highlight [Store Tracking] and push <EN-
TER>.
4. A confirmation message is displayed. Confirm the contents of the message, high-
light [Yes] and push <ENTER>.
The tracked route you have traveled is
stored.
5. Push <MAP>or<BACK> to return to the
current location map screen.
INFO:
. A maximum of 5 tracked routes can be
stored. When 5 tracked routes are stored in
the Address Book, a new tracked route
cannot be stored until a tracked route is
deleted.“DELETING STORED ITEM” page 2-
88
Navigation
2-75

Black plate (102,1)
Model "R35-N" EDITED: 2009/ 10/ 30
.The tracked route is stored in the first
available position number in the store
tracking list.Other settingsA tracked route can also be stored using the
following procedure.1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push <EN-
TER>.
4. Highlight [Stored Tracking] and push <EN-
TER>.
5. Highlight [Add New] and push <ENTER>.
INFO:
A tracked route can only be stored using the
setting screen when [Current Tracking] is set to
on.
STORING AVOID AREAAn Avoid Area can be stored.
The Avoid Area is an area that can be excluded
from a route, such as a road that is always
congested. Once Avoid Areas are stored, the
system avoids those areas when calculating a
route. Up to 10 Avoid Areas can be stored.
1. Push <SETTING> .2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push <EN-
TER>.4. Highlight [Avoid Area] and push <ENTER>.
2-76
Navigation

Black plate (103,1)
Model "R35-N" EDITED: 2009/ 10/ 30
5. Highlight [Add New] and push<ENTER>.
INFO:
A maximum of 10 Avoid Areas can be
stored.
When 10 Avoid Areas are already stored, a
new Avoid Area cannot be stored until a
currently stored Avoid Area is deleted.“DELETING STORED ITEM” page 2-
88
6. Highlight the appropriate method to search for a location and push <ENTER>.
“SETTING DESTINATION” page 2-23
7. Set the following items for the searched
location.
Available setting items:
.[Rename]:
Changes the name.
“Rename” page 2-86
. [Move Location]:
Adjusts the location of the Avoid Area.“Move Location” page 2-87
. [Resize Area]:
Adjusts the range of the Avoid Area.“Resize Area” page 2-87
. [FWY]:
Avoids Freeways.“FWY” page 2-87 .
[Delete]:
Deletes the avoid area.
“Delete” page 2-88
8. After finishing the setting, highlight [OK] and push <ENTER> .
EDITING ADDRESS BOOKItems stored in the Address Book can be
modified. These settings can be edited to make
the navigation system more useful.Basic operation1. Push<SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push <EN-
TER>.
4. Highlight the preferred item and push <ENTER> .
Navigation
2-77

Black plate (104,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Available setting items
.[Stored Location]:
Edits the information of a stored home and
Address.
“Editing stored home and address”
page 2-78
. [Stored Routes]:
Edits the information of a stored route.“Editing stored route” page 2-84
. [Stored Tracking]:
Edits the information of a stored tracked
route.“Editing stored tracking” page 2-84
. [Avoid Area]:
Edits the information of a stored Avoid Area.“Editing avoid area” page 2-86
. [Delete Stored Items]:
Deletes a stored location or route.“Deleting all stored items” page 2-90
. [Transfer Address Book]:
Imports or exports the data of the stored
items using a USB memory.
Editing stored home and address1. Highlight [Stored Location] and push <EN-
TER>.
2. Highlight the stored home location or pre- ferred stored address and push <ENTER>.
INFO:
Highlighting [Sort] displays a list of various
sort functions.
To use the sort functions, stored locations
must be set in advance.“Minor adjustment of home or stored
address” page 2-79
3. Highlight the preferred item and push <ENTER> .
Available setting items
. [Edit]:
Edits the stored address information.
. [Move Location]:
Adjusts the location of the stored address.
. [Delete]:
Deletes the stored address.
. [OK]:
Applies the settings.Other settings:A stored address can also be edited using the
following procedure.
2-78
Navigation

Black plate (105,1)
Model "R35-N" EDITED: 2009/ 10/ 30
1. Push<DEST>.
2. Highlight [Address Book] and push <EN-
TER>.
3. Highlight [Store/Edit] and push <ENTER>.
Minor adjustment of home or stored
addressWhen [Edit] is selected, you can edit the
following items of the home or stored location
can be edited.
.[Show Icon on Map]:
. [Name] (only for stored locations):
. [Voicetag] (only for stored locations):
. [Icon]:
. [Sound]:
. [Direction]:
. [Distance]:
. [Phone No.]:
. [Group] (only for stored locations):
. [Entry Numbers] (only for stored locations):
Show Icon on Map:Displays the home icon or the stored address
icon on the map.1. Highlight [Show Icon on Map] and push
<ENTER> .
2. The indicator illuminates when the item is set. Then the system displays the icon on
the map.
Navigation
2-79

Black plate (106,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Name (only for stored locations):Changes the name of a stored location.1. Highlight [Name] and push<ENTER>.
A character input screen is displayed.2. Enter the preferred name for the stored location.
“HOW TO INPUT LETTERS AND
NUMBERS” page 1-16
3. Highlight [OK] and push <ENTER>.
The name is stored.
Voicetag (only for stored locations):1. Highlight [Voicetag] and push <ENTER>.2. Highlight [Store] and push <ENTER>.
3. A beep sounds, and the system enters the
voice command reception mode.
4. Speak the name/word to be used as Voicetag.
5. The Voicetag is stored, provided the system recognizes it.
INFO:
. A Voicetag cannot be stored, overwritten or
played while driving.
. The Address Book can store up to 100
Voicetags.
. Highlight [Play] to confirm the stored Voice-
tag.
. Highlight [Delete] to delete a stored Voice-
tag.
2-80
Navigation