light NISSAN GT-R 2016 R35 Multi Function Display Owners Manual


> (GLW    0RGHO 51 @
6-22Viewing technical information
INFO:
. Do not eject the DVD while updating the
map data. Doing so will result in an
incomplete update.
. To order updated DVD-ROMs, contact your
NISSAN dealer or GT-R certified NISSAN
dealer.
NOTICE
In handling the DVD-ROM, be careful
on the following points.
.Do not try to bend the DVD-ROM.
Do not use any disk that is bent or
cracked.
. Do not use any benzine, thinner, or
antistatic spray on them.
. Do not put on any sticker or write
anything on either surface.
. If you need to clean it, do so with a
soft cloth by wiping from the centre
outward.
. Do not use a DVD Laser Lens
Cleaners as they may cause the
DVD player to malfunction.
This displays the map version information.
BASIC OPERATION
1. Push <INFO>.
2. Highlight [Navigation Version] and push
<ENTER>.
3. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
This displays GPS information, such as the
positioning status, latitude/longitude, altitude
and satellite locations.
BASIC OPERATION
1. Push <INFO>.
2. Highlight [Others] and push <ENTER>.
3. Highlight [GPS Position] and push
<ENTER>.
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Contents of GPS information
*1GPS Reception:
Displays the GPS positioning method.
3-dimension Calculating the latitude, longitude and altitude by four or more satel-
lites.
2-dimension Calculating the latitude, longitude and altitude by three or more
satellites.
Out of range Cannot calculate because no GPS satellites can be located.
*2Latitude:
Displays the latitude.
*3Longitude:
Displays the longitude.
*4Approx Altitude:
Displays the approximate altitude.
VIEWING NAVIGATION SYSTEM
VERSION INFORMATION VIEWING GPS CURRENT LOCATION
INFORMATION
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
7-2Other settings
The navigation system can be customized to
make it easier for you to use.
BASIC OPERATION
1. Push<SETTING>.
2. Highlight the preferred setting item and
push <ENTER>.
Available setting items
. [Navigation]:
Adjust various settings of the navigation
system.
ªNavigation settingº (page 2-91)
. [Audio]:
Adjusts the audio settings.
ªAudio settingsº (page 7-3)
. [Phone]:
Adjusts various settings of the Bluetooth


> (GLW    0RGHO 51 @
This allows to you adjust the speaker tone
quality and sound balance.
1. Push<SETTING>.
2. Highlight [Audio] and push <ENTER>.
3. Highlight the preferred adjustment item and push <ENTER>.
4. Use the center dial to adjust the tone quality or sound balance.
5. After settings, push <ENTER>or
<BACK> to apply the setting.
6. Push <BACK> to return to the previous
screen.
Push <MAP> to return to the current
location map screen.
Available items
. [Bass]:
Adjust the tone quality of the bass. .
[Treble]:
Adjust the tone quality of the treble.
. [Balance]:
Adjust the sound level between the left and
right speakers.
. [Fade]:
Adjust the sound level between the front and
rear speakers.
. [Speed Sensitive Vol.]:
The sound volume is increased according to
the vehicle speed.
. [DivX


> (GLW    0RGHO 51 @
7-4Other settings
This menu turns on and off the display, adjust
the image quality of the navigation screen and
change the color of the menu screen.
BASIC OPERATION
1. Push<SETTING>.
2. Highlight [Display] and push <ENTER>.
3. Highlight the preferred adjustment item and push <ENTER>.
Available setting items
. [Display Adjustment]
Turn on and off the display and adjust the
image quality of the navigation screen.
. [Color Theme]
Set the color of the menu screen.
DISPLAY ADJUSTMENT
This menu turns on and off the display and
adjusts the image quality of the navigation
screen.
Basic operation
1.Highlight [Display Adjustment] and push
<ENTER>.
2. Highlight the preferred adjustment item and push <ENTER>.
3. Use the center dial to adjust to the preferred setting.
4. After setting, push <ENTER>or<BACK>
to apply the setting.
5. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Available setting items
. [Display]:
Turn on or off the screen.
ªDisplayº (page 7-4)
. [Brightness]:
Adjust the screen brightness.
ªBrightnessº (page 7-5)
. [Contrast]:
Adjust the screen contrast.
ªContrastº (page 7-5) .
[Background Color]:
Set the background color.
ªBackground colorº (page 7-5)
Display
To turn off the display, push <ENTER>.
The display can also be turned off by pushing
and holding <
OFF>for more than 2
seconds.
When any button is pushed with the display off,
the display turns on. The display will automati-
cally turn off when there is no switch operation
DISPLAY SETTINGS
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
7-6Other settings
2. Highlight the preferred menu color and push<ENTER>.
This turns on and off, as well as adjusts, the
phone function (ringer, incoming and outgoing
volume) , the voice guide function and the beep
function.
BASIC OPERATION
1. Push <SETTING>.
2. Highlight [Volume & Beeps] and push
<ENTER>.
3. Highlight the preferred adjustment item and push <ENTER>.
4. Use the center dial to adjust the volume. Push <ENTER> to set to on or off.
5. After setting, push <ENTER>or<BACK>
to apply the setting.
6. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen. Available setting items
.
[Audio Volume]:
Adjust the volume level of the audio system.
. [Guidance Volume]:
Adjust the volume level of voice guidance.
. [Ringtone]:
Adjust the volume level of the ringtone.
. [Incoming Call]:
Adjust the incoming call volume.
. [Outgoing Call]:
Adjust the outgoing call volume.
. [Switch Beeps]:
Select to toggle the beep function between
on and off. The indicator light illuminates
when the beep function is set to on. The
beep sounds when pushing and holding a
button or when a prohibited operation is
performed.
. [Guidance Voice]:
Select to toggle the voice guidance function
between on and off. The indicator light
illuminates when the voice guidance func-
tion is set to on.
VOLUME ADJUSTMENT
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
This changes the clock settings.
BASIC OPERATION
1. Push<SETTING>.
2. Highlight [Clock] and push <ENTER>.
3. Highlight the preferred adjustment item and push <ENTER>.
4. Use the center dial to adjust to the preferred setting. Push <ENTER>to set on or off.
5. After setting, push <ENTER>or<BACK>
to apply the setting.
6. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Available setting items
. [On-screen Clock]:
Select to toggle the clock display located in
the top right corner of the display between
on and off. The indicator light illuminates when the clock display is set to on.
. [Clock Format (24h)]:
Select the clock format between 12-hour
and 24-hour times. The indicator light
illuminates when the clock is set to the 24-
hour format.
. [Offset (hour)]:
Use the center dial to adjust the offset value
(between


> (GLW    0RGHO 51 @
7-8Other settings
This key does not appear on the display until the
ignition switch is pushed to the ON position.
1. Push<SETTING>.
2. Highlight [Comfort] and push <ENTER>.
3. Highlight the preferred setting item and
push <ENTER>. The indicator light of the
selected item illuminates.
4. After setting, push <ENTER>or<BACK>
to apply the setting.
5. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Available items
. Auto Interior Illumination:
When this item is turned to ON, the interior
lights will illuminate if any door is unlocked. .
Speed Sensing Wiper Interval:
When this item is turned to ON, the wiper
interval is adjusted automatically according
to the vehicle speed.
. Selective Door Unlock:
When this item is turned to ON, only the
driver's door is unlocked first after the door
unlock operation. When the door handle
request switch on the driver's or front
passenger's side door is pushed to be
unlocked, only the corresponding door is
unlocked first. All the doors can be unlocked
if the door unlock operation is performed
again within 60 seconds.
When this item is turned to OFF, all the
doors will be unlocked after the door unlock
operation is performed once.
. Intelligent Key Lock/Unlock:
When this item is turned to ON, door lock/
unlock function by pushing the door handle
request switch will be activated.
. Return All Settings to Default:
Select this item, push <ENTER>and
choose [YES] if you want to return all
settings to the default.
This changes the language and measurement
unit used in the system.
LANGUAGE SETTINGS
1. Push <SETTING>.
2. Highlight [Others] and push <ENTER>.
3. Highlight [Language & Units] and push
<ENTER>.
4.Highlight [Select Language] and push
<ENTER>.
COMFORT SETTINGS LANGUAGE AND UNIT SETTINGS
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
5.Highlight the preferred setting item and
push <ENTER>. The indicator light of the
selected item illuminates.
Available languages
.[English]
.[FrancË ais]
.[Espan Ä
ol]
NOTICE
Do not change the ignition switch
position while changing the language.
Doing so may cause a system malfunc-
tion.
UNIT SETTINGS
1. Push <SETTING>.
2. Highlight [Others] and push <ENTER>.
3. Highlight [Language & Units] and push
<ENTER>.
4.Highlight [Select Units] and push
<ENTER>.
5.Highlight the preferred unit and push
<ENTER>. The indicator of the selected
unit illuminates.
Available units
.US:
mile, MPH, 8F, MPG
.Metric:
km, km/h, 8C, L/100 km
6. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Other settings7-9
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
7-10Other settings
UNIT SETTINGS (Tire Pressure)
1. Push<SETTING>.
2. Highlight [Others] and push <ENTER>.
3. Highlight [Language/Units] and push
<ENTER>.
4. Highlight [Select Units (Tire Pressure)] and
push <ENTER>.
5.Highlight the preferred unit and push
<ENTER>. The indicator of the selected
unit illuminates.
Available units
.psi
.kPa
6. Push <BACK> to return to the previous
screen.
The image files in the USB device will be
displayed.
1. Press <SETTING>.
2. Select [Others] and press <ENTER>.
3. Select [Image Viewer] and press
<ENTER>.
The image of the selected file is displayed on the
right side of the screen.
When a number of folders are included in the
USB device, select a folder from the list and
push <ENTER> to display the file list.
IMAGE VIEWER
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
8-2Voice recognition
NISSAN Voice Recognition allows hands-free
operation of the navigation system and other
systems equipped on this vehicle, in one of two
modes, Standard Mode or Alternate Command
Mode. Standard Mode allows the operation of
Navigation, Phone, Audio, Information and Help.
The commands that are available are always
shown on the display and announced by the
system. To perform operations, simply follow the
prompts given by the system. In Standard Mode,
hands-free operation of Change map view,
Route selection and Bluetooth Audio, etc. is
not available through Voice Recognition.
Alternate Command Mode allows advanced
operations. When this mode is active, an
expanded list of commands can be spoken after
pushing<
>, and the voice command menu
prompts are turned off. Note that in this mode
the recognition success rate may be affected
because the number of available commands and
ways of speaking each command are increased.
Otherwise, it is recommended that Alternate
Command Mode be turned OFF and Standard
Mode be used for the best recognition perfor-
mance.
ªAlternate Command Modeº (page 8-13)
INFO:
. To improve recognition success when Alter-
nate Command Mode is active, try using the
Speaker Adaptation function available in that
mode.
ªSpeaker adaptationº (page 8-22)
Otherwise, it is recommended that Alternate
Command Mode be turned OFF and Stan-
dard Mode be used for the best recognition
performance.
. For the voice commands for the audio,
phone and other systems, refer to the
vehicle Owner's Manual. The following sec-
tions refer only to the navigation, phone and
information systems.
. If the air conditioner is set to ªAutoº, the fan
speed is automatically lowered so that
commands can be recognized more easily.
CONFIRMING HOW TO USE VOICE
COMMANDS
When operating the voice recognition system
for the first time or if help is preferred to use the
system, the User Guide can be displayed.
It is possible to confirm how to use voice
commands by accessing a simplified User
Guide, which contains basic instructions and
tutorials for several voice commands.
Basic operation
1. Push <INFO>.
2. Highlight [Others] and push <ENTER>.
3. Highlight [Voice Recognition] and push
<ENTER>.
4. Highlight [User Guide] and push
<ENTER>.
NISSAN VOICE RECOGNITION STANDARD MODE
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK