NISSAN GT-R 2018 Owners Manual

Page 1071 of 1176

could affect the proper operation
of the TPMS.
. Do not inject any tire liquid or
aerosol tire sealant into the tires,
as this may cause a malfunction
of the tire pressure sensors.
NOTE:
. You can check the pressure of all
four tires on the touch screen dis-
play. See the separate Multi Func-
tion Display Owner’s Manual.
. The tires of this vehicle are filled
with nitrogen gas. When the tire
pressure is low, fill the tires with
nitrogen. It is recommended you
contact a GT-R certified NISSAN
dealer for information on filling the
tires with nitrogen.
. If nitrogen is not available, com-
pressed air may be safely used
under normal driving conditions.
However, NISSAN recommends re-
filling with nitrogen for maximum
tire performance.

Page 1072 of 1176

Page 1073 of 1176

and remove rings, metal bands,
or any other jewelry. Do not lean
over the battery when jump start-
ing.
. Do not attempt to jump start a
frozen battery. It could explode
and cause serious injury.
. Your vehicle has an automatic
engine cooling fan. It could come
on at any time. Keep hands and
other objects away from it.

Page 1074 of 1176

Page 1075 of 1176

Page 1076 of 1176

NOTICE
Never tow the vehicle with any of the
wheels on the ground as this may
cause serious and expensive da-
mage to the powertrain.
In case of emergency
6-9
TOWING YOUR VEHICLE

Page 1077 of 1176

VEHICLE RECOVERY (freeing a
stuck vehicle)

Page 1078 of 1176

7 Appearance and care

Page 1079 of 1176

Page 1080 of 1176

WAXINGRegular waxing protects the paint surface
and helps retain new vehicle appearance.
Polishing is recommended to remove
built-up wax residue and to avoid a
weathered appearance before reapplying
wax.
A GT-R certified NISSAN dealer can assist
you in choosing the proper product.
.Wax your vehicle only after a thorough
washing. Follow the instructions sup-
plied with the wax.
. Do not use a wax containing any
abrasives, cutting compounds or clea-
ners that may damage the vehicle
finish.
Machine compound or aggressive polish-
ing on a base coat/clear coat paint finish
may dull the finish or leave swirl marks.

Page:   < prev 1-10 ... 1031-1040 1041-1050 1051-1060 1061-1070 1071-1080 1081-1090 1091-1100 1101-1110 1111-1120 ... 1180 next >