NISSAN QUEST 2007 V42 / 3.G Navigation Manual

NAI0417
Map settings3-25

Road color
The road types are differentiated by colors.
Freeway: Pink with red border
Main road: Amber
Narrow street: Gray
Road with incomplete map data: Dark green
3-26Map settings

4 Setting a destination
Destination screen.............................................. 4-2
Basic operation............................................. 4-2
Setting a street address/residence as the
destination........................................................ 4-4
Setting a Street Address................................. 4-5
Setting a City Center....................................4-10
Setting an Intersection..................................4-14
Setting from map.........................................4-20
Setting a stored location as the destination............4-22
Setting your home........................................4-23
Setting from Address Book............................4-25
Setting a previous destination.........................4-28
Setting the previous starting point....................4-30Setting from stored routes..............................4-32
Setting a facility as the destination.......................4-33
Setting a point of interest...............................4-34
Setting a freeway entrance/exit........................4-43
Setting by phone number...............................4-46
Setting a nearby place..................................4-47
Operations after setting a destination....................4-50
Available setting items...................................4-50
Adjusting the location of the destination ............4-51
Adding additional destinations to a route...........4-52
Viewing information about the searched location
4-53
Storing a location.........................................4-54

There are several methods you can use to set
your destination. Understand the advantages of
each method and select the best method for
finding and setting your destination.
BASIC OPERATION
1. Push<DEST>.
2. Highlight the preferred destination setting
method and push<ENTER>.
NOTE:
There may be a case that you cannot
search by pointing at “Street Address”,
“Intersection” and “Point of Interest
(POI)”. This is because the map DVD-
ROM data of Nunavut in Canada is un-
developed.
NAV2773
Available setting items
.Street Address:
Searches for a destination by address.
.Address Book:
Searches for a destination from the list of
stored home and the stored locations..Previous Destinations:
Searches for a destination from the previous
destinations.
.Points of Interest:
Searches for a destination from various
categories of businesses or locations.
DESTINATION SCREEN
4-2Setting a destination

.Others
— Phone Number:
Searches for a destination by the tele-
phone number.
— Nearby Places:
Searches for a business/location near
your vehicle.
— Previous Starting Point:
Sets the previous starting point as the
destination.
— Stored Route:
Selects a stored route.
— Freeway Entrance/Exit:
Searches for a destination from a free-
way entrance/exit.
— Intersection:
Searches for a destination from inter-
sections.
— City Center:
Sets the center of a city as the destina-
tion.
Setting a destination4-3

If you know the address of a friend or business
or you are going to a central location (tourist
spot, etc.) in a city, the following setting
methods are available.
.Setting a Street Address
If you know the address of your destination,
use this method to enter the address and
then have the system calculate a route. You
can also search for a location near the
preferred destination by entering the house
number if the map DVD-ROM contains the
relevant data.
.Setting a City Center
This allows you to have the system calculate
a route to the center of a city, without setting
a specific location.
.Setting an Intersection
This allows you to set the destination to an
intersection of any two streets, and then
have the system calculate a route.
SETTING A STREET ADDRESS/
RESIDENCE AS THE DESTINATION
4-4Setting a destination

NAV2825
SETTING A STREET ADDRESS
1. Highlight [Street Address] and push
<ENTER>.
A character input screen is displayed.
NAV3068
INFO:
Character input screen for Street Address
&1Region:
The region previously entered is auto-
matically displayed. It can be changed.
&2City:
“All” is displayed, and all cities in the
region are available. Route calculation
conditions can be narrowed down by
entering the name of the city.
&3Street:
Enter the name of a street.
&4House No. :
A house number can be entered.
&5Symbols/A-Z:
Symbol keys are displayed by high-
lighting [Symbols] and pushing
<ENTER>. Alphabet keys are dis-
played by highlighting [A-Z] and push-
ing<ENTER>.
Setting a destination4-5

NAV3069
2. Enter the house number, highlight [OK] and
push<ENTER>.
If you do not know the house number,
highlight [OK] or [Skip] and push
<ENTER>.
NAV3070
3. Enter the name of the street. After finishing
the entry, highlight [OK] and push
<ENTER>. A list of cities is displayed.
NAV2829
4. Highlight the correct city of the destination
from the list and push<ENTER>.
4-6Setting a destination

NAV2830
5. The selected destination is displayed at the
center of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push<ENTER>.
The system sets the destination to the
selected location and starts calculating a
route.
NAV2831
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-50)
NAV3071
Changing the region
1. Highlight [Region] and push<ENTER>to
change the region.
Setting a destination4-7

NAV3072
2. Highlight the preferred region and push
<ENTER>.
A character input screen is displayed.
NAV3073
Specifying a city
1. Highlight [City] and push<ENTER>to
narrow down the route calculation condi-
tions by entering the name of the city.
NAV3074
2. Enter the name of the city, highlight [OK] and
push<ENTER>.
A list screen is displayed.
INFO:
.Highlight [All Cities] and push
<ENTER>to include all cities in the
region as the route calculation condition.
.Highlight [Last 5 Cities] and push
<ENTER>to display 5 cities recently
set as destinations.
4-8Setting a destination