change time PEUGEOT 206 2008 Owners Manual

Page 25 of 127

27
MULTIFUNCTION DISPLAYS
-
Setting the parameters
Press button 1 for two seconds to
access the settings. The informa-
tion lashes to show it is ready to be
modiied.
Then, individual presses on button 1
allow you to scroll through the vari -
ous data in the following sequence:
- language in which the information is displayed,
- unit of distance (kms or miles),
- unit of temperature (degrees Celsius or Fahrenheit),
- time format (12 then 24 hour mode),
- hour,
- minutes,
- year,
- month,
- day.
Pressing button 2 allows you to
change the information selected.
Maintain the pressure for rapid
scrolling.
After 7 seconds without operation,
the screen returns to the normal
display and the modiied data is
recorded.MONOCHROME DISPLAY B
This enables the following informa -
tion to be displayed:
- the time,
- the date,
- the outside temperature (this lashes when there is a risk
of ice),
- the radio displays,
- the status of the doors. The display shows you, by means
of a graphic, whether a door is
open,
- the warning messages
(e.g. "battery charge fault")
or information messages
(e.g. "fuel level low"), displayed
temporarily, can be cleared by
pressing button 1 or 2,
- the trip computer.

Page 82 of 127

75
DRIVING
-
Automatic operation
Automatic changing of the four
gears:
F select position D in the gate.
The gearbox always selects the most
suitable gear according to the follow -
ing parameters:
- the road proile,
- the vehicle load.
The gearbox is then operating in
auto-adaptive mode, without any ac -
tion on your part. If you take your foot off the accel-
erator suddenly, the gearbox will not
change to a higher gear for reasons
of safety.
Manual operation
Manual
changing of the four gears:
F select position M in the gate,
F push the lever to the + sign to
change to a higher gear,
F pull the lever to the - sign to
change to a lower gear.
You can change from position D
(driving in automatic mode) to posi-
tion M (driving in manual mode) at
any time.
WARNING
Never select position N when the
vehicle is moving.
Never select positions P or R unless
the vehicle is stationary.
Never change between positions to
optimise braking on a slippery sur-
face.
Notes
For immediate maximum accelera-
tion without touching the gear lever,
press the accelerator pedal down as
far as it will go (kickdown). The gear -
box will automatically change down
or maintain the gear selected until
maximum engine speed is reached.
When the brake is applied, the gear -
box will automatically change down
in order to provide eficient engine
braking. Sport and snow programmes
In addition to the auto-adaptive
programme, there are two special
programmes.
The programme is displayed on the
instrument panel screen.
Sport programme
F
Press button S once the engine
has been started.
The gearbox automatically favours
sporty driving and more dynamic
acceleration.
Snow programme
This programme improves starting
and drive when traction is poor.
F Press button T once the engine
has been started.
The gearbox adapts to driving on
slippery roads.
Note: you can return to the auto-
adaptive programme at any time.
F Press button S or T again to
switch off the programme you
are in. Notes
It is only possible to change from one
gear to another if the vehicle speed
and engine speed permit. If they do
not, the vehicle will operate tempo
-
rarily in automatic mode.
When the vehicle is stationary or
moving very slowly, the gearbox
automatically selects gear M1.
Programmes S (sport) and T (snow)
do not operate in manual mode.