buttons Peugeot 307 Break Dag 2003.5 Owner's Manual

29-09-2003





 
The most recent destinations are shown. There are three possible methods of defining the location to which youwish to travel:
– accept the last details input by means of the 090function,
– input the details of your destination,
– automatically input the details of your current location by means of the 0*&
0 function.
!
&
The last address entered is displayed. There are three options for defining the location in which you wish to obtain thisservice:
– accept the last address entered
using the 090function,
– fill in the 0
70and 0&&0
zones,
– automatically enter the name of your current location using the
0*&
0 function.
&&$

&& If you wish to be directed to a service, select the
&$%corresponding
to the service, then confirm by pressing the dial. The list of services corresponding to the category selected is displayed. Select the &&then confirm by
pressing the dial to access the
0!&
)&0 function.
An indication on the edge of the screen (x/n) shows you the maximum number ofestablishments providing the same ser-vice within a radius of 30 miles (50 km), asthe crow flies, from the selected location. Use buttons 0?0and 0@0to consult the
list provided.When the establishment of your choice is displayed, you can:
 select the 090function to acti-
vate guidance towards this service,
 select the 0)&0function to enter
this establishment in your directo-
ry.

&/

if the service selected is not avail-
able in the programmed location, a temporary message informs you of this. Following validation of the location, the service closest to it is displayed.The distance indicated is the distanceas the crow flies from the service tothe selected location.

29-09-2003



!"# $
%C
 +

&-+ 
Place switch %in the $  " posi-
tion. The limiter is not yet active. By default the display indicates:
.+

&-+
&&  Place switch %in position or
0 ! or switch off the ignition to
switch the system off. The last speed programmed remains in the
memory.






A speed can be memorised without
activation of the limiter.
A brief press on buttons 8and 
decreases or increases by 1 mph
(1 km/h). An extended press decreas-es or increases the memorised speed
progressively.
#+
>
+

&
 
Pressing button ?activates the lim-
iter, pressing this button again deac-tivates it. When the limiter is active, the display indicates (e.g. at 80 mph (130 km/h)):
0 !
0"$>!! $  "!A
$
&-+

this prevents the
vehicle speed exceeding the speed programmed by the driver (minimumspeed of 20 mph (30 km/h)).
"



-


+

-
.


-=
* During the year, according to engine.
!'+



 Pressing the accelerator to exceed the programmed speed will have no
effect unless the pedal is pressedfirmly (passing the 
&


,

+: .
The limiter is deactivated temporarily and
displays (e.g. at 80 mph (130 km/h)):
To re-activate the limiter, release the accelerator to slow down to a speedbelow the programmed speed. 
sometimes (on a steep
descent), the limiter may not prevent the vehicle from exceeding the pro-grammed speed, this speed flashes.


++ In the event of a limiter malfunction, the memorised speed is erased, thedashes flash for a few seconds:
Contact a PEUGEOT dealer to have the system checked.