Peugeot 307 SW 2005 Owner's Guide

29Multifunction displays-
28-02-2005
Presentation
This displays the following informa-
tion:
- the time,
- the date,
- the outside temperature (this lash-es if there is a risk of ice),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Emis- sion control system faulty") or infor-
mation messages (e.g.: "Auto lights
on"), displayed temporarily, can be
cleared by pressing the "ESC" but-
ton,
- the trip computer (see correspond- ing section).
MONOCHROME SCREEN A
(without RD4 audio equipment)Parameter coniguration
There are three display control but-
tons:
- "ESC" to abandon the operation in
progress,
- "MENU" to scroll through the men-
us or sub-menus,
- "OK" to select the menu or sub-
menu required.
General menu
Press the "MENU" button to scroll
through the various menus of the
general menu:
- vehicle coniguration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the
menu required.

Multifunction displays30 -
28-02-2005
31Multifunction displays-
28-02-2005
Vehicle coniguration
Once the "Vehicle coniguration"
menu has been selected, you can
activate or deactivate the following
equipment:
- wiper linked with reverse gear,
- automatic switching on of the lights,
- "follow-me-home" lighting,
- parking assistance.
Options
Once the "Options" menu has been
selected, you can start diagnostics of
the status of the equipment (active,
not active, faulty). Languages
Once the "Languages" menu has
been selected, you can change
the language used by the display
(Français, Italiano, Nederlands, Por-
tugues, Portugues-Brasil, Deutsch,
English, Espanol).
Display settings
Once the "Display settings" menu
has been selected, you can gain ac-
cess to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.
Units
Once the "Units" menu has been se-
lected, you can change the units of
the following parameters:
- temperature (°C or °F),
- fuel consumption (l/100, mpg or km/l).
Once you have selected a setting,
press the "OK" button to change its
value.
Wait for approximately ten sec-
onds without any action to allow
the changed data to be recorded or
press the "ESC" button to cancel.
The display then returns to the nor-
mal display.
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.

Multifunction displays30 -
28-02-2005
31Multifunction displays-
28-02-2005
MONOCHROME DISPLAY A
General menu
Press the "MENU" button to gain
access to the general menu, then
press the " 5" or " 6" buttons to scroll
through the following items:
- radio-CD,
- vehicle coniguration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the
menu required.
Presentation
This displays the following informa-
tion, via the RD4 audio equipment
control keypad:
- the time,
- the date,
- the outside temperature (this lash- es if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
-
the warning messages (e.g.: "Emis-
sion control system faulty") or informa-
tion messages (e.g.: "Auto lights on"),
displayed temporarily, can be cleared
by pressing the "ESC" button,
- the trip computer (see correspond-
ing section). Radio-CD
With the RD4 audio equipment
switched on, once the "Radio-CD"
menu has been selected, you can
activate or deactivate the functions
linked with the use of the radio (RDS
following, REG mode), the CD or the
CD changer (introscan, random play,
CD repeat). Vehicle coniguration
Once the "Vehicle coniguration"
menu has been selected, you can
activate or deactivate the following
equipment:
- rear wiper linked with reverse gear,
- automatic switching on of the
lights,
- "follow-me-home" lighting,
- parking assistance.
Options
Once the "Options" menu has been
selected, you can start diagnostics of
the status of the equipment (active,
not active, faulty).

Multifunction displays32 -
28-02-2005
33Multifunction displays-
28-02-2005
Display settings
Once the "Display settings" menu
has been selected, you can gain ac-
cess to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.Languages
Once the "Languages" menu has
been selected, you can change
the language used by the display
(Français, Italiano, Nederlands, Por-
tugues, Portugues-Brasil, Deutsch,
English, Espanol).
Units
Once the "Units" menu has been se-
lected, you can change the units of
the following parameters:
- temperature (°C or °F),
- fuel consumption (l/100, mpg or km/l).
Once you have selected a setting,
press the "
7" or " 8" buttons to
change its value.
Press the " 5" or " 6" buttons to
move to the previous or next setting
respectively.
Press the "OK" button to record
the change and return to the normal
display or press the "ESC" button to
cancel.
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.

Multifunction displays32 -
28-02-2005
33Multifunction displays-
28-02-2005
MONOCHROME SCREEN C
General menu
Press the "MENU" button to gain ac-
cess to the general menu:
- audio functions,
- trip computer (see corresponding section),
- personalisation-coniguration.
Press the " 5" or " 6" buttons to se-
lect the menu required, then conirm
by pressing the "OK" button.
Presentation
This displays the following informa-
tion, via the RD4 audio equipment
control keypad:
- the time,
- the date,
- the outside temperature (this lash-
es if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Emission control system faulty") or
information messages (e.g.: "Auto-
matic switching on of the lights acti-
vated"), displayed temporarily, can
be cleared by pressing the "ESC"
button,
- the trip computer (see correspond- ing section).
"Audio functions" menu
With the RD4 audio equipment
switched on, once this menu has
been selected, you can activate or
deactivate the functions linked with
the use of the radio (RDS, REG, Ra-
dioText), the CD or the CD changer
(introscan, random play, CD repeat).
"Personalisation-
Coniguration" menu
Once this menu has been selected,
you can gain access to the following
functions:
- deine the vehicle parameters,
- display coniguration,
- selection of the language.

Multifunction displays34 -
28-02-2005
35Multifunction displays-
28-02-2005
Deine the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the
folllowing equipment:
- wiper linked with reverse gear,
- automatic switching on of the lights,
- "follow-me-home lighting" and du- ration,
- parking assistance. Selection of the language
Once this menu has been selected,
you can change the language used
by the display (Deutsch, English,
Espanol, Français, Italiano, Neder-
lands, Portugues, Portugues-Brasil).
Display coniguration
Once this menu has been selected,
you can gain access to the following
settings:
- brightness-video setting,
- date and time setting,
- selection of the units.
When you have selected a setting,
press the
"OK" button, then press
the " 7" or " 8" buttons to change
its value.
Press the "OK" button to record the
change and move on to the next set-
ting or press the "ESC" button to
cancel.Example: "duration of follow-me-
home lighting"
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.

Multifunction displays34 -
28-02-2005
35Multifunction displays-
28-02-2005
MONOCHROME SCREEN CT
Presentation
This displays the following informa-
tion, via the RT3 audio/telephone
control keypad:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message),
- the audio source displays (radio, CD, ...),
- the telematic system displays (tele- phone, services, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Fuel level low") and vehicle function
status messages (e.g.: "Automatic
switching on of the lights activat-
ed") displayed temporarily,
- the trip computer display,
- the satellite navigation system dis- plays. In order to enable you to use all of
your system's functions, you have
two CD-Roms:
- one, "Coniguration", contains the
software and the various display
languages and spoken information,
- the other, "Navigation", contains the satellite navigation system map
data.
General menu
Press the "MENU" button on the
RT3 audio/telephone to access the
general menu and select one of the
following applications:
- navigation - guidance,
- audio functions,
- trip computer,
- directory,
- telematics,
- coniguration.
For further details regarding these
functions, refer to the corresponding
section.

Multifunction displays36 -
28-02-2005
37Multifunction displays-
28-02-2005
Display coniguration
The "Display coniguration" menu
provides access to the following pa-
rameters:
• "Brightness setting": setting of the brightness of the display,
• "Sound": setting of the voice syn- thesiser (for the male/female voice
parameter: insert the coniguration
CD-Rom); setting of the voice com-
mands,
• "International parameters": setting of the date and time (12 or 24 hour
mode, adjustment of the minutes on
GPS); selection of the units (l/100 - °C
or mpg - °F),
• "Selection of the language": selec- tion of the language of the display,
information and voice commands
(Français, English, Italiano, Portu-
gues, Espanol, Deutsch, Nederlands:
insert the coniguration CD-rom).
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary."Coniguration" menu
This provides access to successive
conirmation windows.
Deine the vehicle parameters
This enables you to activate or de-
activate certain driving and comfort
functions:
- wiper linked with reverse gear,
- automatic switching on of the lights,
- "follow-me-home" lighting and du- ration,
- parking assistance. Example: "duration of follow-me-
home lighting"

Multifunction displays36 -
28-02-2005
37Multifunction displays-
28-02-2005
COLOUR SCREEN DT
Presentation
This displays the following informa-
tion, via the RT3 audio/telephone
control panel:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message),
- the audio source displays (radio, CD, ...),
- the telematic system displays (tele- phone, services, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Fuel level low") and vehicle function
status messages (e.g.: "Automatic
switching on of the lights activat-
ed") displayed temporarily,
- the trip computer display,
- the satellite navigation system dis- plays. In order to enable you to use all of
your system's functions, you have
two CD-Roms:
- one, "Coniguration", contains the
software and the various display
languages and spoken informa-
tion,
- the other, "Navigation", contains the satellite navigation system map
data.
General menu
Press the "MENU" button on the
RT3 audio/telephone to access the
general menu and select one of the
following applications:
- navigation - guidance,
- audio functions,
- trip computer,
- directory,
- telematics,
- coniguration,
- map,
- video.
For further details regarding these
functions, refer to the corresponding
section.

Multifunction displays38 -
28-02-2005
39Multifunction displays-
28-02-2005
Display coniguration
The "Display coniguration" menu
provides access to the following pa-
rameters:
• "Select the colours": selection from the palette of colours available for
the display,
• "Brightness and intensity": setting of the brightness and intensity of
the display,
• "Sound": setting of the voice syn- thesiser (for the male/female voice
parameter: insert the coniguration
CD-Rom); setting of the voice com-
mands,
• "International parameters": setting of the date and time (12 or 24 hour
mode, adjustment of the minutes on
GPS); selection of the units (l/100 - °C
or mpg - °F),
• "Selection of the language": selec- tion of the language of the display,
information and voice commands
(Français, English, Italiano, Portu-
gues, Espanol, Deutsch, Nederlands:
insert the coniguration CD-rom)."Coniguration" menu
This provides access to successive
conirmation windows.
Deine the vehicle parameters
This enables you to activate or de-
activate certain driving and comfort
functions:
- wiper linked with reverse gear,
- automatic switching on of the lights,
- "follow-me-home" lighting and du- ration,
- parking assistance. Example:
"Automatic switching on of
the lights"