Peugeot 307 SW 2005 Manual PDF

Audio equipment and telematics66 -
28-02-2005
67Audio equipment and telematics-
28-02-2005
Making a call
Press the button to
display the contextual
menu of the telephone.
Pressing the end of
the steering column
control for more than
2 seconds calls up a contextual
menu limited to the "Directory", "List
of calls" and "Voice mail" functions.
Entering a number
Select the function "Enter number"
then enter the number of the person
you wish to speak to using the alpha-
numeric keypad.
Press the "Pick up" button to make
the call.
Making a call from a directory
Select the "Directory" function to
access all the iles containing a
telephone number or the "List of
calls" function to access the list of the
last twenty incoming (if the number
display option is active) or outgoing
calls.
There are two directories, the RT3
GPS audio/telephone directory and
the SIM card directory. To consult the
SIM directory, insert your SIM card
and enter your PIN code.
Receiving a call
When a ringing
sounds to let you know
that a call is waiting,
you can choose either
to accept it by press-
ing the "Pick up" but-
ton or the end of the steering wheel
control or not to accept it by pressing
the "Hang up" button or by selecting
and validating the "NO" button on the
"Answer?" screen.
If you accept the call,
to end your commu-
nication, press the
"Hang up" button.
If you do not accept the call, it is
transferred to your voice mail or to a
call diversion number.
You can activate or deactivate this
transfer by pressing the "Hang up"
button for more than two seconds.
Text messages (SMS)
Accessing text messages
When the buzzer sounds (if the SMS
text messages buzzer option is ac-
tive) and a superimposed screen
announces "Do you wish to read the
new text message (SMS)?", you can
choose to read the text message
received by selecting and validating
"YES" or postpone reading it by se-
lecting and validating "NO", by press-
ing the "ESC" button or by waiting
until the announcement disappears.
Note: the old text messages stored
and the new text messages, the read-
ing of which you wish to postpone,
can be consulted. Press the "MENU"
button then validate the "Telematic"
icon, select "Text messages (SMS)"
and validate the function "Reading of
text messages received" by pressing
the navigator. Then scroll through the
list by turning the knob and press the
knob to select the text message to
be read (if the voice synthesiser is
active).

Audio equipment and telematics66 -
28-02-2005
67Audio equipment and telematics-
28-02-2005
Sending a text message
Before typing your irst text mes-
sage, check that your text messages
(SMS) centre number is stored cor-
rectly in the sub-menu "Server cen-
tre N°". If it is not, any text messages
typed before this number is entered
will not be sent.
In the menu "Text messages (SMS)"
validate the function "Typing of a text
message". Type your text message
using the alphanumeric keypad and
validate it using the "OK" button to
store it or validate the "Send" button
to send it. Validation of the "Send"
button enables you to enter the
number of your recipient or select it
from the directory or from the list of
calls and send the message."Duration of calls" menu
Select the "Duration of calls" function
from the "Telephone functions" menu
to consult the duration counters for
the calls made. The part counter to-
tals the duration of the calls since the
last zero reset carried out using the
"Zero reset" button.
"Telephone options" menu
Select the "Telephone options" func-
tion from the "Telephone functions"
menu to access the functions:
• "Conigure the calls" which permits activation and deactivation of the
"show my number" and "automatic
answering after X rings" functions,
• "Ringing options" which permits adjustment of the ringing volume
for voice calls, activation of the text
messages (SMS) receipt buzzer
and selection of a ring tone from
the ive offered,
• "Diversion number/voice mail" which permits recording of the call
diversion number chosen by the
customer, otherwise the call will be
transferred to the voice mail.
Services*
Press the button to
display the "Services"
menu and select one
of the following serv-
ices:
• "Customer Contact Centre" con-
tacts the PEUGEOT Customer
Contact Centre directly and permits
access to the services offered (this
call is suspended if an emergency
or assistance call has been made).
• "PEUGEOT Assistance" enables
you to contact the call centre which
controls the PEUGEOT assistance
service directly, make an assist-
ance request and receive rapid
assistance (you have 6 seconds
within which to cancel the call
when it is made) . During the as-
sistance call phase it is not pos-
sible to make any other calls with
the exception of emergency calls.
Signing the speciic PEUGEOT
contract means that you will be
located; in this case, a star will ap-
pear in the text on the multifunction
screen.
• "Operator services" gives access to
the list of services speciic to your
operator (e.g.: customer service,
consumption monitoring, news,
stock market, weather, travel,
games, etc) if access is available.
* If option and service available.

Audio equipment and telematics68 -
28-02-2005
69Audio equipment and telematics-
28-02-2005
Emergency call*
In an emergency,
press and hold the
"SOS" button until a
signal is heard and a
call validation/deletion
screen is displayed
(delay of 6 seconds) or enter 112
directly.
Make an emergency call when you
are involved in a situation which
leads you to fear serious conse-
quences (injuries, ...) for those
exposed to it (if you witness or are
involved in an accident resulting in
injuries, an attack, ...).
Before making a call of this kind, the
audio/telephone must detect a cel-
lular network and you must have
inserted your SIM card .
If you have not signed the speciic
PEUGEOT contract, the parameters
of the "SOS" button are set so that a
call is made to 112 - unique number
made available by the worldwide
GSM network, reserved for emer-
gency calls.
If you have signed the speciic
PEUGEOT contract, your call will
be located and you will be put in
contact with a PEUGEOT emer-
gency representative.
For further details, refer to the gen-
eral conditions of your contract. "PEUGEOT Assistance"/
Emergency call
A green diode lashes on the RT3
GPS audio/telephone panel, when
the emergency call procedure or a
call to "PEUGEOT Assistance" be-
gins, then lights continuously when
the call is taken by the services con-
cerned.
It is not possible to make or receive
calls or send or receive SMS text
messages during the connection;
these will be diverted to your voice
mail.
Directory
General
The "Directory" application gives
access to 400 iles divided into 4 in-
dependent sub-directories ("User1",
"User2", "User3" and "User4"). It
enables you to manage these iles,
make calls using the SIM card and
activate guidance.
* If option and service available.Main menu
From the general menu,
select the "Directory"
application to access its
main menu and select
one of the following func-
tions:
• "Call", to call a number stored in a ile,
• "Activate guidance to", to initiate guidance to a location stored in a
ile,
• "Management of directory iles", to add, delete, modify and consult di-
rectory iles or exchange them with
the SIM card,
• "Directory coniguration", to select the working directory and deine
the default directory when the sys-
tem is switched on.

Audio equipment and telematics68 -
28-02-2005
69Audio equipment and telematics-
28-02-2005
Creation/Modiication of a ile
To create a ile, from the "Directory"
menu, select the "Management of di-
rectory iles" function, then "Add".
In the ile, select the section to be
illed in, conirm and then enter the
information.
To modify an existing ile, select it by
means of the "Consult or modify the
ile" function of the "Management of
directory iles" menu, then make the
modiications.
When entering the address, the navi-
gation CD ROM must be present to
obtain guidance to this destination.Recording a description
associated with a directory ile
When a description is associated with
a directory ile, you can record the
description vocally to use it later for
direct access by means of voice com-
mands (e.g.: "Call" "[Name of voice
description]" or "Guide to" "[Name of
voice description]").
Select "Consult or modify the ile"
from the "Management of directory
iles" menu to access the description
entering and recording screen.
Press the record button and follow
the instructions.RDS TMC (Traffic Message
Channel) Traffic Information
You can access the information relat-
ing to trafic conditions from the "Au-
dio functions" or "Telematics" menu,
then from the "TMC Trafic Informa-
tion" function (see section "Satellite
navigation system").
The RT3 GPS audio/telephone per-
mits access to the TMC RDS trafic
information broadcast free on the FM
waveband.

70 -
28-02-2005
71
-
28-02-2005
SATELLITE NAVIGATION
SYSTEM
Introduction
The satellite navigation system
guides you, by means of vocal and
visual instructions, to your chosen
destination.
The heart of the system lies in the
use of a map data base and the GPS
(Global Positioning System). With
this system you can ix the position
of your vehicle by means of a satel-
lite network.
The system uses the following ele-
ments:
- the CD-Rom drive,
- the coniguration CD-Rom
- the navigation CD-Rom,
- the last voice message recall control,
- the control panel,
- the CT monochrome screen or the
DT colour screen.
The CD-Rom drive
This is part of the RT3 GPS radio/
telephone.
1. Ejection button on CD-Rom.
2. CD-Rom housing.
The coniguration CD-Rom contains
the language and type of voice syn-
thesiser voice parameters.
The navigation CD-Rom contains all
the map data.
It must be inserted in the drive, print-
ed face upwards.
The last voice message
recall control
Pressing for more than two seconds
on the button at the end of the
lights stalk repeats the last voice
information.
Use only CD-Roms recom-
mended by PEUGEOT.
During guidance, the
navigation CD-Rom must
remain in the RT3 GPS
audio/telephone drive; if you wish to
listen to an audio CD, you must use
the CD changer.
Certain functions or serv-
ices described may vary
depending on the version
of CD-Rom or the country
where the vehicle is sold.
For safety reasons, the inputting of
navigation information by the driver
must be carried out when the vehicle
is stationary.
Audio equipment and telematics

70 -
28-02-2005
71
-
28-02-2005
The control panel
This lets you navigate, select, choose
and validate the functions, from the
parameters displayed. 'MENU' button:
- brief press: access to the
general
menu .
- press for more than two seconds: access to the help menu and to
the list of voice commands .Rotation of the navigator:
This allows you to
move round the
screen and thus select a function.
It also allows you:
- with a "setting" type parameter,
after selection, to increase or de-
crease the value,
- with a "list" type parameter, after
opening the list, to scroll through
the values,
- with map guidance, to increase or
decrease zoom.
"MODE"
button:
- brief press: modiication of per- manent display (audio system,
navigation/guidance...).
- Press for more than two seconds displays general information .
Pressing the navigator:
This allows:
- access to the list of controls (con-
textual menu) of the permanent
application displayed, if there is no
other display superimposed,
- conirmation of the selected func-
tion or of the modiied value,
- selection of a "setting" or "list"
type parameter for modiication.
Tip:
You can access the general menu
by pressing the RT3 GPS audio/
telephone navigator.
'ESC' button:
- brief press:
cancelling of opera-
tion in progress or erasing of last
superimposed display.
- pressing for more than two sec- onds: erasing of all superimposed
displays and return to the perma-
nent display.
Audio equipment and telematics

72 -
28-02-2005
73
-
28-02-2005
General notes on the display
Monochrome screen CT Permanent locating
When guidance is not activated, this
function permits displaying of the
name of the street along which the
vehicle is travelling, if the navigation
CD-Rom is in the drive.
Press the navigator for more than
two seconds to display the name
of the street along which you are
travelling.
Colour screen DT During guidance, if the navigation
CD-Rom is present, the screen dis-
plays different information depend-
ing on the manoeuvres to be carried
out.
1.
Current manoeuvre or compass
or course (if calculation in
progress or zone not mapped).
2. Next manoeuvre to be carried
out.
3. Next road to be taken.
4. Current road.
5. Estimated time of arrival at
destination.
6. Distance to inal destination.
7. Distance to next manoeuvre.
Note: depending on the situation of
the vehicle and on the reception of
GPS information, this information
may disappear from the screen tem-
porarily.
Initialisation of the system
Following disconnection of the bat-
tery, the navigation system must be
reinitialised:
- place the vehicle in the open air, so that it can make contact with at
least one satellite,
- place the ignition key in the running position,
- wait for ifteen minutes.
Audio equipment and telematics

72 -
28-02-2005
73
-
28-02-2005
Access via the general menu
Switch on the RT3 GPS audio/
telephone and insert the navigation
CD-Rom.
Press the
"MENU" button to access
the general menu . Navigation - Guidance Selecting a destination
Select the Navigation/Guidance icon
using the navigator, then validate
by pressing the navigator to access
the main
"Navigation - Guidance"
menu. The main
"Navigation - Guidance"
menu offers various options for acti-
vation or management of guidance:
- choice of the type of destination
address (entering of address,
service, GPS co-ordinates, stored
address),
- modiication to the initial route,
- displaying of the chosen destination,
- setting of the guidance option parameters,
- stop or resume guidance (display- ing of the message which changes
depending on the previous status). The
"Destination choice" menu
offers various options for reaching a
destination:
- entering a postal address,
- selecting a service available in a town (town hall, hotel, cinema, air-
port...).
- entering GPS details,
- selecting a destination stored in the directory,
- selecting one of the previous desti- nations.
Audio equipment and telematics

74 -
28-02-2005
75
-
28-02-2005
Entering an address
The last guidance address is dis-
played.
To ill in the entry zones, select and
validate in succession the zones
"Town"
, "Road" , then "N°" (the last
two are optional).
The "OK" function permits valida-
tion of the address and access to the
guidance activation function.
The "Store" function permits record-
ing of the address in a directory ile.
The "Curr. loc" function permits dis-
play of the current address. Entering the name of the town
When the list contains fewer than ive
names, these are displayed automat-
ically. Select a town then validate by
pressing the navigator.
When the complete name of the
town is displayed, select the "OK"
function then conirm by pressing the
navigator.
Note: once the town has been en-
tered, you can conirm by pressing
"OK" . You will then be guided to the
centre of this town automatically.
Entering the name of the road
Enter the name of the street in the
same way as the name of the town.
When the full name of the street is dis-
played, select the "OK" function then
conirm by pressing the navigator.
To enter the name of a town, select
each letter by turning the navigator,
then validate each letter by pressing
the navigator.
If an error is made entering the let-
ters, the
"Change" function permits
erasing of the last letter entered.
Note: following the validation of a
letter, only those which could make
up a name existing in the database
appear.
As letters are entered, the "List"
function indicates the number of
towns beginning with the same let-
ters. Activation of this function per-
mits selection of a town from the list. Entering the town and road using
the alphanumeric keypad
Press the numeric key which corre-
sponds to the letter required until the
letter appears on the screen, then
conirm by pressing the # key after
each letter.
Audio equipment and telematics

74 -
28-02-2005
75
-
28-02-2005
Entering the number of the road
or junction
Enter the number of the street previ-
ously entered.
Select the
"OK" function, then con-
irm by pressing the navigator.
Note: if the number of the street en-
tered is not listed, it is rejected. The
list of junctions is displayed automati-
cally.
Select a street from the "Junctions"
function, this avoids having to enter
the street number.
The full destination is displayed.
Select the "OK" function, then
conirm by pressing the navigator
to access the guidance activation
function. Follow the instructions
given by the system. Selecting a service
If you wish to be directed to a service,
select the
category corresponding to
the service, then conirm by pressing
the navigator.
The list of services corresponding to
the category selected is displayed.
Select the service then conirm by
pressing the navigator to access the
"Choice of a location" function.
The last address entered is dis-
played.
There are three options for deining
the location in which you wish to ob-
tain this service:
- accept the last address entered us- ing the "OK" function,
- ill in the "Town" and "Road"
zones,
- automatically enter the name of your current location using the
"Curr. loc." function. Note:
if the service selected is not
available in the programmed loca-
tion, a temporary message informs
you of this.
Following validation of the location,
the service closest to it is displayed.
The distance indicated is the dis-
tance as the crow lies from the serv-
ice to the selected location.
An indication on the edge of the
screen (x/n) shows you the maximum
number of establishments providing
the same service within a radius of
30 miles (50 km), as the crow lies,
from the selected location.
Use buttons "<<" and ">>" to con-
sult the list provided.
When the establishment of your
choice is displayed, you can:
- select the "OK" function to activate
guidance towards this service,
- select the "Store" function to enter
this establishment in your direc-
tory.
Audio equipment and telematics