navigation Peugeot 407 C 2008 Owner's Manual
Page 17 of 211
1
20
1. Coolant temperature indicator dial.
2. Lights on indicators:
dipped headlamps.
main beam headlamps.
front fog lamps.
rear fog lamps.
3. Rev counter dial.
4. Warning lights:
seat belts not fastened in the front.
fuel level.
left direction indicator.
5. Fuel level indicator dial.
5 - DIAL PETROL-DIESEL MANUAL AND AUTOMATIC GEARBOX INSTRUMENT PANELS
10. CHECK and trip recorder zero re-
set and service display button.
11. Instrument panel display:
Total distance recorder.
Trip recorder.
Cruise control/ speed limiter refer- ence value.
Service indicator.
Direction advice (navigation)
CHECK (vehicle autotest).
Trip computer information displays.
Warning and status displays.
6. Warning lights:
h a n d b r a k e a p p l i e d o r b r a k e fl u i d level or electronic brake force dis-
tribution fault.
right direction indicator.
7. Speedometer dial.
8. Warning lights:
emission control system.
anti-lock braking system (ABS).
passenger air bag disarmed.
pre-heat (Diesel engine starting).
9. Engine oil temperature indicator
dial. Automatic gearbox lever position
indicator.
12. Instrument panel lighting rheostat.
Page 31 of 211
1
32
Press the "MENU" button to gain ac-
cess to the general menu.
Select the "Trip computer" or
"Vehicle diagnostics" application us-
i n g t h e n a v i g a t o r , t h e n c o n fi r m o r p r e s s
the "MODE" button until you reach the
t r i p c o m p u t e r s c r e e n , t h e n c o n fi r m u s -
ing "OK" .
The "Trip computer" or "Vehicle diag-
nostics" menu offers various options:
- Warnings log,
- Status of the functions,
- Inputting of the distance to be trav- elled.
Warnings log
This summarises the active warning
messages, displaying them on the
multifunction display in succession.
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.
Distance remaining
When guidance is not activated, this
enables you to enter an approximate
distance to be travelled value.
Display on the instrument panel screen
All of the various items of trip computer
information also appear on the instru-
ment panel screen at the same time.
Distance remaining to be travelled (km or miles)
Average speed (km/h or mph)
Average consumption (l/100 or km/l or mpg)
Distance travelled (km or miles)
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).
This is the distance remaining to the
destination, either calculated at any
time by the navigation if guidance is
activated or entered by the user, mi-
nus the distance covered since the
distance was entered.
If digits are missing, dashes are dis-
played in their place.
This is the average fuel consumption
since the computer was last set to zero.
This indicates the distance travelled
since the computer was last set to zero.
Access via the general menu
"TRIP" (Route) menu
Page 34 of 211
2
35
16/9 COLOUR SCREEN DT
This displays the following information,
via the WIP Com audio and telematics
system control panel:
- the time,
- the date,
- the outside temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k
of ice),
- the status of the accesses,
- the warning messages or vehicle function status messages,
displayed temporarily,
- the audio functions,
- the telematic systems display ( t e l e p h o n e , s e r v i c e s , . . . ) ,
- the trip computer information,
- the personalisation and c o n fi g u r a t i o n d i s p l a y s ,
- the air conditioning parameters,
- t h e f r o n t a n d r e a r p a r k i n g assistance display,
- the satellite navigation system i n f o r m a t i o n . General menu
Press the
"MENU" button to access
the general menu and select one of
the following functions:
- "Navigation - guidance",
- "Map",
- " T r a f fi c i n f o r m a t i o n " ,
- "Audio functions",
- "Telematics",
- " C o n fi g u r a t i o n " ,
- "Video",
- "Vehicle diagnostics",
- " A i r c o n d i t i o n i n g " . " C o n fi g u r a t i o n " m e n u
This provides access to the following
functions:
- " D i s p l a y c o n fi g u r a t i o n " ,
- "Sound",
- "Select language",
- " D e fi n e t h e v e h i c l e p a r a m e t e r s " .
Page 136 of 211
1010
123
ACCESSORIES FOR YOUR 407 COUPÉ
A wide range of accessories recom-
mended by PEUGEOT and original
parts are offered by the network.
T h e y a l l b e n e fi t f r o m P E U G E O T ' s r e c -
ommendation.
These accessories and parts, having
been tested and approved for reliabil-
ity and safety, are all adapted to your
PEUGEOT vehicle.
The product range offered by PEUGEOT
Accessories is structured around 5 cat-
egories: PROTECTION - TOURING -
IN-CAR TECHNOLOGY - STYLING -
UNIVERSAL.
Anti-theft alarm , engraved
windows, wheel anti-theft
d e v i c e s , fi r s t a i d k i t , w a r n i n g
triangle, high visibility safety
jacket, snow chains, anti-
skid covers, ...
"Protection": Mats, boot tray.
For leisure pursuits: child
seats and booster cushions,
audio/telephone console,
cool box, bicycle carrier on
towbar.
Trailer towbar which must be
fi t t e d b y t h e P E U G E O T n e t w o r k .
"Touring":
Telephone, hands-free kits, sat-
ellite navigation, CD changer,
multimedia, USB Box.
"In-Car Technology": Alloy wheels, wheel trims,
spoiler, seat covers compat-
ible with side air bags, twin
exhaust tailpipe.
"Styling":
W i n d s c r e e n w a s h fl u i d , i n t e -
rior and exterior cleaning and
maintenance products.
"Universal":
T h e fi t t i n g o f e l e c t r i c a l e q u i p m e n t
or accessories which are not
recommended by PEUGEOT
may result in a failure of your
vehicle's electronic system.
P l e a s e n o t e t h i s s p e c i fi c w a r n i n g . Y o u
are advised to contact a representa-
tive of the Marque to be shown the
range of recommended equipment
and accessories.
The NINETEEN alloy wheels which
are available as accessories require
t h e fi t t i n g o f t y r e s o f s p e c i fi c d i m e n -
sions (235/40ZR19 96 Y), with a maxi-
mum section of 236 mm. Consult a
PEUGEOT dealer.
Depending on the country in
which the vehicle is sold, it
is compulsory to have a high
visibility safety jacket, warning
triangle and spare bulbs available in
the vehicle.
Note
To prevent the mat from becoming
caught under the pedals:
- ensure that the mat is positioned and secured correctly,
- n e v e r fi t o n e m a t o n t o p o f a n o t h e r .
Page 145 of 211
0 2
132
G E N E R A L M E N U
MAP: orientation, details, display. AUDIO FUNCTIONS: radio, CD, Jukebox, options.
For maintenance of the display, the use of a soft, non-abrasive cloth ( s p e c t a c l e s c l o t h ) i s recommended without any additional product.
TELEMATIC: telephone, directory, SMS.
CONFIGURATION: vehicle, display, time, languages, v o i c e , a u x i l i a r y s o c k e t ( A U X ) parameters.
VIDEO: activation, parameters. VEHICLE DIAGNOSTICS: warnings log.
AIR CONDITIONING: on/off and dual zone control ( a c c o r d i n g t o e q u i p m e n t ) .
NAVIGATION GUIDANCE: GPS, stages, options.
TRAFFIC INFORMATION: TMC information, messages.
Page 146 of 211
11
2 2
3 3
5 5
7 7
4 4
6 6
8 8
133
S E L E C T I N G A D E S T I N A T I O N T i p : f o r a d e t a i l e d g l o b a l v i e w o f t h e m e n u s a v a i l a b l e , r e f e r t o t h e " D i s p l a y fl o w c h a r t s " p a r t o f t h i s W I P Com section.
Press the MENU button.
Turn the dial and select the NAVIGATION GUIDANCE function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Turn the dial and select the DESTINATION CHOICE function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Turn the dial and select the ENTER AN ADDRESS function.
When the country has been selected, turn the dial and select the TOWN function.
TOWN
E N T E R A N A D D R E S S
D E S T I N A T I O N C H O I C E
GPS
Page 148 of 211
11
2 2
3 3
4 4
5 5
6 6
7 7
8 8
0 3
135
G U I D A N C E O P T I O N S
GPS
The route chosen by the WIP Com audio and telematics system depends directly on the guidance options. Changing these options may completely change the route.
Press the MENU button.
Turn the dial and select the NAVIGATION GUIDANCE function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Turn the dial and select the GUIDANCE OPTIONS function.
Turn the dial and select the DEFINE CALCULATION CRITERIA function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
G U I D A N C E O P T I O N S D I S T A N C E / T I M E
D E F I N E C A L C U L A T I O N C R I T E R I A
Turn the dial and select, for example, the DISTANCE/TIME function.
Page 149 of 211
9 9
1010
1111
1 2 1 2
11
2 2
3 3
4 4
5 5
136
Turn the dial and select the TRAFFIC INFO function if it is not ticked.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Select OK and press the dial to c o n fi r m .
T R A F F I C I N F O
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
T i c k t h i s b o x f o r o p t i m u m o p e r a t i o n o f t h e t r a f fi c i n f o r m a t i o n , diversions will be suggested.
OK
G U I D A N C E S P E E C H S Y N T H E S I S
Press the MENU button.
Turn the dial and select the NAVIGATION GUIDANCE function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
G U I D A N C E O P T I O N S
Turn the dial and select the GUIDANCE OPTIONS function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Page 153 of 211
11
2 2
3 3
4 4
5 5
9 9
8 8
7 7
6 6
0 3
140
A D D I N G A S T A G E
During guidance, press the MENU button.
Turn the dial and select the NAVIGATION GUIDANCE function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Turn the dial and select the JOURNEY LEGS AND ROUTE function.
J O U R N E Y L E G S A N D R O U T E
Select OK and press the dial to c o n fi r m t h e o r d e r o f t h e s t a g e s .
When the new address has been entered, select OK and press the dial t o c o n fi r m .
Enter for example a new address.
Select the ADD A STAGE function ( 9 s t a g e s m a x i m u m ) a n d p r e s s t h e d i a l t o c o n fi r m .
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
The stage must be completed or deleted before the guidance can continue to the next destination. Otherwise, the WIP Com audio and telematics system will always guide you back to the previous stage.
E N T E R A N A D R E S S
A D D A S T A G E
GPS
OK
OK
Page 166 of 211
2 2
11
153
Press the end of the lights stalk to start thtart the voice recognition. Say the words one by one and wait for the for the audible c o n fi r m a t i o n s i g n a l b e t w e e n e a c h w o r d . c o n fi r m a t i o n s i g n a l b e t w e e n e a c h w o r d . The list which follows is exhaustive.
D I S P L A Y I N G T H E L I S T A N D U S I N G T H E M
To display the list of available voice commcommands, press the end of the lights stalk to start the voice voice recognition, then say HELP or WHAT CAN I SAY.
For the same operation, press and hold the MENU button and select the function VOICE COMMANDS LIST.
V O I C E C O M M A N D S L I S T
V O I C E C O M M A N D S L E V E L 1 display
CD changer
guide to t r a f fi c i n f o
CD player/jukebox
navigation
radio
L E V E L 2 audioguidancenavigationtrip computertelephone
descriptiondisplayreadrandom playlisttrack numberprevious/previous/next track d i r e c t o r y ( M P 3 C D )
scanstop/resumedirectoryshow
zoom out/inautostorelistmemoryprevious/next
L E V E L 3
1 ... 20
1 ... 20
previous/nextrepeat
destinationdescriptionvehicle
1 ... 6
disk numberprevious/next discrandom playlisttrack numberprevious/next trackrepeatscan
SMS/message
telephone
displayreadvoice mailbox last numbervoice message servicedirectorydescription
calldescription