display Peugeot RCZ 2011 Owner's Guide

42




















MONOCHROME SCREEN C (WITH
PEUGEOT CONNECT SOUND)

DISPLAYS ON THE SCREEN

This displays the following information:


- time,

- date,

- ambient temperature (this fl ashes if there is a risk of ice),

- state of the openings (doors, boot...),

- visual parking sensors.

- audio functions,

- telephone information and directories.
Warning messages (e.g.: "Emission control system faulty") or
information messages (e.g.: "Automatic lighting of headlamps
activated") may appear temporarily. These can be cleared by pressing
the "ESC"
button.


CONTROLS

From the control panel of your Peugeot Connect Sound, you can:


)
press the "MENU"
button for access to the main menu
,

)
press the " 
" or " 
" buttons to scroll through the items on the
screen,

)
press the "MODE"
button to change the permanent application
(audio source, telephone...),

)
press the " 
" or " 
" buttons to change a setting value,

)
press the "OK"
button to confi rm,
or


)
press the "ESC"
button to abandon the operation in progress.

11:32104.6 FM1RTL23Mem1c°
TMC LOUD RDS TATue 21/10/2010

1/
INSTRUMENTS AND CONTROLS

MAIN MENU



)
Press the "MENU"
button to gain access to the main menu
:


- audio functions,

- vehicle diagnostics,

- personalisation-confi guration,

- telephone (Bluetooth system).

)
Press the " 
" or " 
" buttons to select the menu required, then
confi rm by pressing the "OK"
button.



"AUDIO FUNCTIONS" MENU

With the Peugeot Connect Sound switched on, once this menu has
been selected you can activate or deactivate the functions linked with
use of the radio (RDS, REG, RadioText) or the CD (introscan, shuffl e,
CD repeat).
For more information on the "Audio functions" application, refer to the
Peugeot Connect Sound part of the "Audio and Telematics" section.


"DIAGNOSIS VEHICLE" MENU

Once this menu has been selected, you can consult information
concerning the status of the vehicle.

Alert log

This summarises the active warning messages, displaying them in
succession on the multifunction screen.

)
On the " Diagnosis vehicle
" menu, select the following application:



)
Press the "MENU"
button to gain access to the main menu.

)
Press the arrows, then the "OK"
button to select the " Diagnosis
vehicle
" menu.

44

"PERSONALISATION-CONFIGURATION"
MENU
Once this menu has been selected, you can gain access to the
following functions:


- defi ne the vehicle parameters,

- display confi guration,

- choice of language.


Define the vehicle parameters

Once this menu has been selected, you can activate or deactivate the
following equipment:


- selective unlocking (refer to the "Access" section),

- guide-me-home and welcome lighting (refer to the "Visibility" and
"Ergonomics and Comfort" sections),

- interior mood lighting (refer to the "Ergonomics and Comfort" section),

- daytime running lamps (refer to the "Visibility" section),

- rear parking sensors (refer to the "Driving" section).
)
Press the " 
" or " 
" buttons, then the "OK"
button to select the
"Guide-me-home headlamps" line.

)
Press the " 
" or " 
" buttons to set the value required (15, 30 or
60 seconds), then press the "OK"
button to confi rm.

)
Press the " 
" or " 
" buttons, then the "OK"
button to select the
"OK"
box and confi rm or press the "ESC"
button to cancel.
Example: setting of the duration of the guide-me-home lighting


)
Press the " 
" or " 
" buttons, then the "OK"
button to select the
menu required.

1/
INSTRUMENTS AND CONTROLS
With the Peugeot Connect Sound switched on, once this menu has
been selected you can confi gure your Bluetooth hands-free system
(pairing), consult the various telephone directories (calls log, services...)
and manage your communications (pick up, hang up, call waiting,
secret mode...).
For more information on the "Telephone" application, refer to the
Peugeot Connect Sound part of the "Audio and Telematics" section.

"TELEPHONE" MENU


*
According to country.


Display configuration

Once this menu has been selected, you have access to the following
settings:


- brightness-video setting,

- date and time setting,

- choice of units.



Choice of language

Once this menu has been selected, you can change the language
used by the display (Deutsch, English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-Brasil, Türkçe * ).

For safety reasons, confi guration of the multifunction screen by
the driver must only be done when stationary.

2ABC3DEF
5JKL4GHI6MNO
8TUV7PQRS9WXYZ
0*#
1
RADIO MEDIANAV ESC TRAFFIC
SETUPADDR
BOOK
46




















16/9 HIGH DEFINITION
RETRACTABLE COLOUR SCREEN
(WITH PEUGEOT CONNECT MEDIA)

DISPLAYS IN THE SCREEN

Once unfolded, it displays the following information automatically and
directly:


- time,

- date,

- altitude,

- ambient temperature (the value displayed fl ashes if there is a risk of
ice),

- visual parking sensor information,

- audio functions,

- telephone and address book information,

- satellite navigation system information.
From the Peugeot Connect Media control panel, to select one of the
applications:


)
press the dedicated "RADIO"
, "MEDIA"
, "NAV"
, "TRAFFIC"
,
"ADDR BOOK"
or "SETUP"
button for access to the
corresponding menu,

)
turn dial A
to select a function, an item in a list,

)
press button B
to confi rm the selection,
or

)
press the "ESC"
button to abandon the current operation and
return to the previous display.
For more information on these applications, refer to the Peugeot
Connect Media part of the "Audio and Telematics" section.

CONTROLS

1/
INSTRUMENTS AND CONTROLS
For operation of the retractable screen (opening, closing,
adjustment of the position, etc.), refer to the paragraph "Access to
the retractable screen".


)
Press the "SETUP"
button to gain access to the "SETUP"
menu.
This allows you to select from the following functions:


- "Language and speech",

- "Date and time",

- "Display",

- "Units",

- "System".



"SETUP" MENU


Language and speech

This menu allows you to:


- select the language used by the display (Deutsch, English,
Espanol, Français, Italiano, Nederlands, Polski, Portugues,
Portugues-Brasil, Türkçe * ),

- select the voice recognition parameters (activation/deactivation,
advice on use, personal voice programming, etc.),

- set the volume of the voice synthesiser.



Date and time

This menu allows you to set the date and time, the format of the date
and the format of the time (refer to the Peugeot Connect Media part of
the "Audio and Telematics" section.


Display

This menu allows you to set the brightness of the screen, the screen
colour scheme and the colour of the map (day/night or auto mode).


Units

This menu allows you to select the units: temperature (°C or °F) and
distance (miles or km).


System

This menu allows you to restore the factory confi guration, display the
software version and activate scrolling text.


*
According to country. For safety reasons, confi guration of the multifunction screen by
the driver must only be done when stationary.

AUTOAUTOA/C
74






DUAL-ZONE DIGITAL AIR
CONDITIONING
The air conditioning only operates when the engine is running.


AUTOMATIC OPERATION


1. Automatic comfort programme



)
Press the "AUTO"
button. The indicator lamp on the
button comes on.
We recommend the use of this mode: it permits automatic and
optimised adjustment of all of the functions, passenger compartment
temperature, air fl ow, air distribution and air recirculation, in accordance
with the comfort value that you have chosen.
This system is designed to operate effectively in all seasons, with the
windows closed.

2. Driver's side adjustment

When the engine is cold, to prevent too great a distribution of cold
air, the air fl ow will reach its optimum level gradually.
In cold weather, it favours the distribution of warm air to the
windscreen, side windows and footwells only.


3. Passenger side adjustment

The driver and front passenger can each adjust the
temperature to their requirements.
The value indicated on the display corresponds to a level
of comfort and not to a temperature in degrees Celsius or
Fahrenheit.


)
Turn control 2
or 3
to the left or to the right respectively to decrease
or increase this value..
A setting around the value 21 provides optimum comfort. However,
depending on your requirements, a setting between 18 and 24 is
normal.
You are advised to avoid a left/right setting difference of more than 3.
On entering the vehicle, if the interior temperature is much colder
or warmer than the comfort value, there is no need to change
the value displayed in order to obtain the comfort required. The
system corrects the difference in temperature automatically and
as quickly as possible.

3/
EASE OF USE AND COMFORT

4. Automatic visibility programme

The automatic comfort programme may not be suffi cient to
quickly demist or defrost the windscreen and side windows
(humidity, several passengers, ice, etc.).


)
In this case, select the automatic visibility programme.
The system automatically controls the air conditioning, the air fl ow and
the air intake and provides optimum distribution of the ventilation to the
windscreen and side windows.


)
To switch it off, press the "visibility"
button again or press the
"AUTO"
button, the indicator lamp on the button switches off and
the indicator lamp on the "AUTO"
button comes on.




MANUAL OPERATION

If you wish, you can make a different choice from that offered by the
system by changing a setting. The other functions will still be controlled
automatically.


)
Pressing the "AUTO"
button returns the system to completely
automatic operation.
For maximum cooling or heating of the passenger compartment,
it is possible to exceed the minimum value 14 or the maximum
value 28.


)
Turn control 2
or 3
to the left until "LO"
is displayed or to the
right until "HI"
is displayed.


5. Air conditioning On/Off



)
Press this button to switch off the air conditioning.
Switching the system off could result in discomfort (humidity,
condensation).


)
Press this button again to return to automatic operation of the air
conditioning. The indicator lamp on the "A/C"
button comes on.



6. Air distribution adjustment



)
Press one or more buttons to direct the air fl ow towards:


- the windscreen and side windows (demisting or defrosting),

- the windscreen, the side windows and the vents,

- the windscreen, the side windows, the vents and the footwells,

- the vents and the footwells,

- the vents,

- the footwells,

- the windscreen, the side windows and the footwells.




7. Air flow adjustment



)
Turn this control to the left to decrease the air fl ow or to
the right to increase the air fl ow.
The air fl ow indicator lamps, between the two fans, come on
progressively in relation to the value requested.

84

















USB PLAYER


This connection box, consisting of a USB port, is located in the front
armrest.
It permits the connection of portable equipment, such as an iPod
®
digital
audio player of generation 5 or later or a USB memory stick.
It reads the audio fi le formats (mp3, ogg, wma, wav...) which are
transmitted to your audio equipment and played via the vehicle's
speakers.
You can manage these fi les using the steering mounted controls or
the audio equipment control panel and display them in the multifunction
screen.

When it is in use, the portable equipment charges
automatically.

For more information on the use of this equipment, refer to
the Peugeot Connect Media part of the "Audio and Telematics"
section.



















PEUGEOT CONNECT USB


This connection box, consisting of a JACK socket and a USB port,
is located in the front armrest.
With the USB port, it permits the connection of portable equipment,
such as a digital audio player of the iPod
® or USB memory stick type.
With the JACK socket, it permits the connection of any type of portable
player.
It reads the audio fi le formats (mp3, ogg, wma, wav...) which are
transmitted to your audio equipment and played via the vehicle's
speakers.
If the equipment is connected to the USB port, you can manage these
fi les using the steering mounted controls or the audio equipment
control panel and display them on the multifunction screen.

If the equipment is connected to the USB port, when it is in use,
the portable equipment charges automatically.

For more information on the use of this equipment, refer to
the Peugeot Connect Sound part of the "Audio and Telematics"
section.

4/
VISIBILITY


Model without AUTO lighting



Model with AUTO lighting



MANUAL CONTROLS

The lighting commands are issued directly by the driver by means of the
ring A
and the stalk B
.

A.
Main lighting mode selection ring: turn it to position the symbol
required facing the mark.
Lamps off.





Automatic illumination of headlamps.

B.
Stalk for switching headlamps: pull it to switch between dipped
headlamps/main beam headlamps.
In the lamps off and sidelamps modes, the driver can switch on the
main beam headlamps temporarily ("headlamp fl ash") by maintaining a
pull on the stalk. Sidelamps only.
Dipped or main beam headlamps.


DISPLAYS

Lighting of the corresponding indicator lamp on the instrument panel
confi rms the switching on of the lighting selected.
The instrument panel has permanent back-lighting, both day and night.
In this case, illumination of the instrument panel is not linked to the
exterior lighting.