sensor RENAULT MEGANE SCENIC 1995 Service Manual Online

83
INSTRUMENT PANEL
Fuel level sensor

83
INSTRUMENT PANEL
Fuel level sensor

83
INSTRUMENT PANEL
Fuel level sensor

83
INSTRUMENT PANEL
Oil level sensor

83
INSTRUMENT PANEL
Coolant temperature sensor

56
EXTERIOR ACCESSORIES
External temperatur sensor (E)

Contents
Page
40
41
GENERAL
Dimensions 40-1
Lifting equipment 40-2
Towing 40-3
Key to symbols 40-4
Description of parts (exploded view) 40-5
Opening clearances 40-8
Collision fault finding 40-13
Sub-frame dimensions 40-16
Body jig bench 40-18
Special tooling 40-29
LOWER STRUCTURE
Rear floor 41-1
Rear side member 41-5
Rear end cross member 41-7
Front towing ring mounting
reinforcement 41-10
Rear towing ring bracket 41-12
Bearing rear mounting support 41-13
Bearing front mounting support 41-15
Acceleration sensor mounting 41-16
Central floor rear reinforcement 41-18
UPPER FRONT STRUCTURE
Wing 42-1
UPPER SIDE STRUCTURE
Front section of the body side 43-1
Complete sill panel 43-4Page
44 UPPER REAR STRUCTURE
Rear wing panel 44-1
Light support 44-3
End panel 44-9
Lower hinge mounting
reinforcement 44-20
Upper hinge mounting
support 44-23
Lower hinge mounting
support 44-26
Luggage compartment lid stop mounting
support 44-28
NON-SIDE OPENING ELEMENTS
Tailgate 48-1
Luggage compartment lid 48-3Sheet Metal Work
P
S
T
V
W
X
Y
Z
AA
42
A
43
F
HA
F
J
K
L
M
N
48
C
D
Mechanisms and Accessories
50
A
52
A
B GENERAL
Tooling 50-1
NON-SIDE OPENING ELEMENT
MECHANISMS
Luggage compartment lid and rear
screen locks 52-1
Luggage compartment lid exterior handle 52-3

GENERAL INFORMATION
Description of parts (exploded view)
40Description of parts (exploded view)
LOWER STRUCTURE
1Front towing ring mounting reinforcement (41-V)
2Acceleration sensor mounting (41-Z)
3Front bearing mounting support (41-Y)
4Rear bearing mounting support (41-X)
5Central floor rear reinforcement (41-AA)
6Rear side member (41-S)
7Rear towing ring bracket (41-W)
8Rear floor (41-P)
9Rear end cross member (41-T)
PRF4021
40-5

LOWER STRUCTURE
Acceleration sensor mounting
41SAcceleration sensor mounting
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of the centre floor.
For standardisation purposes, the centre floor is
delivered by the Parts Department without the
acceleration sensor mounting.
In the operation described below, only descriptions of
the joints specific to the part concerned are given.
The information on the additional parts will be dealt
with in their appropriate chapters (see contents).
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part delivered alone.
PARTS CONCERNED (thickness in mm):
1
2
3
4
5Acceleration sensor mounting
Front seat height adjuster
Front seat height adjuster reinforcement
Centre floor
Tunnel stiffener 1.2
1.5
1.5
1
1
41-16
Z

LOWER STRUCTURE
Acceleration sensor mounting
41P
41-17
X1 = 122 mm
Z