steering Seat Ateca 2019 User Guide
Page 279 of 408
Driver assistance systems
Operate the speed limiter Fig. 252
On the left of the steering column:
control and butt ons t
o operate the speed limit-
er. Fig. 253
On the left of the steering column:
third l e
ver for operating the speed limiter. Function
Position of the turn signal lever
Page 294 of 408
Driving
Lane Assist system* Intr oduction Fig. 266
On the windscreen: field of vision of
the L ane Assist syst
em camer
a.Using the camera located in the windscreen,
the L
ane Assist syst
em det
ects the possible
lines dividing the lanes. When the vehicle in-
voluntarily approaches a dividing line it has
detected, the system notifies the driver with a
corrective steering movement. The purpose is
not only to warn the driver, but also to keep
the vehicle inside the lane. This movement
can be over-regulated at any time.
No warning is produced with the turn signals
activated, given that the Lane Assist system
understands that a lane change is required. Control lamp "
It lights up yellow
Lane Assist active but not available.
The system cannot accurat
ely recognise the lane.
Please see page 294, Lane Assist system is not avail-
able (the control lamp is lit up yellow). "
It lights up green
Lane Assist system active and available. Some control and warning lamps will light up
briefly when the ignition is s
wit
ched on t
o
check certain functions. They will switch off
after a few seconds. WARNING
Observe the safety warnings
Page 305 of 408
Driver assistance systems
Using the blind spot detector (BSD)
with parking assist ant (RC
T
A)Activating and deactivating the blind spot
detect
or (BSD) with parking assist
ant
(RCTA)
The blind spot detector with parking assistant
can be switched on and off by accessing the
A s s i s t a n c e s y s t e m s menu on the dash
panel display using the steering wheel con-
trols. If the vehicle is equipped with a multi-
function camera, it can also be accessed by
means of the driver assistance systems key
located on the main beam headlight lever.
Open the A s s i s t a n t s menu.