display Seat Ateca 2019 Owner's Guide

Driving
speed without slowing the engine below its
idling speed.
Aft er st
arting the descent of a sl
ope below
30 km/h (18 mph), speed is limited to a mini-
mum of 2 km/h (1 mph) and a maximum of
30 km/h (18 mph). When appropriate, the
driver may increase or decrease the speed
within the limit by pressing the accelerator or
the brake. At this point the function is interrup-
ted and, if necessary, it is then reactivated.
Even so, it is imperative that the surface guar-
antees sufficient adhesion. For this reason,
the Hill Descent Control will not fulfil its func-
tion when, for example, descending a slope
with a frozen or slippery surface.
Hill Descent Control is available when the
dash panel display shows the message k.
Hill Descent Control automatically intervenes
if the following conditions are met:

Driving
indication on the instrument panel display

Driver assistance systems
Fig. 268
On the instrument panel display: In-
dication on the L ane Assist syst
em displ
ay (ex-
ample 2). Status display
The syst em is activ
e

, but not available,
either because the minimum speed has
not been reached or because the lane
lines are not recognised

Driver assistance systems
Using the blind spot detector (BSD)
with parking assist ant (RC
T
A)Activating and deactivating the blind spot
detect
or (BSD) with parking assist

ant
(RCTA)
The blind spot detector with parking assistant
can be switched on and off by accessing the
Assistance systems menu on the dash
panel display using the steering wheel con-
trols. If the vehicle is equipped with a multi-
function camera, it can also be accessed by
means of the driver assistance systems key
located on the main beam headlight lever.
Open the Assistants menu.

Driving
Selecting a parking mode Fig. 280
Overview of reduced displays for park-
ing modes:  Par all
el parking in reverse.  Per-
pendicular parking in reverse.  Perpendicular
parking forwards. Fig. 281
On the instrument panel display: dis-
play of the assist ed parking syst

em with de-
creased visibility. Selecting a parking mode with Park Assist
with prior st
ep in fr
ont of the space
Aft

er activating the Park Assist system and af-
ter detecting a parking space, the display on
the instrument panel proposes a parking
mode. The Park Assist system selects the
parking mode automatically. The selected mode is shown on the instrument panel dis-
play

Driving
Park with Park Assist Fig. 282
On the instrument panel display: per-
pendicular parking. 
Finding a parking space.
 Parking position.  Manoeuvring. Fig. 283
On the instrument panel display: paral-
lel parking.  Finding a parking space .

 Park-
ing position.  Manoeuvring. Key to Fig. 282 and Fig. 283:
Message t o mo
v

e forwards
Your vehicle
Parked vehicle
Parking space detected
Message to park
Message to press the brake pedal
Progress bar
1 2
3
4
5
6
7 Progress bars
The pr
ogr
ess bar

Driving
Exiting a parking space with Park
Assist (only f or par
all
el spaces)Fig. 284
On the instrument panel display:
driving off fr om perpendicul ar parking.Key to the Fig. 284:
Park
ed v

ehicle
Your vehicle in reverse gear
Progress bar to indicate the distance left
to cover
Message giving the proposed manoeuvre
to exit the parking space
Necessary conditions to exit a parking
space with Park Assist

Driver assistance systems
For parallel parking spaces
9. Go forward until the ParkPilot continuous sig-
nal is heard.
OR: go forw
ard until the instrument panel dis-
pl ay sho

ws the message to reverse.
The Park Assist system steers the vehicle for-
war d and back until it can e

xit the space.
10. The vehicle can exit the space when a corre-
sponding message is displayed on the instru-
ment panel and, in some cases, an acoustic
signal sounds.
T
ak

e charge of the steering with the turning
angle set by the P ark Assist syst

em.
11. Paying attention to the traffic, exit the parking
space. Automatic braking intervention by
P
ark Assist Park Assist helps the driver by automatically
br
aking in cert
ain sit

uations.
The driver is always responsible for braking in
time

Driving
Adjusting the display and audible
w arnings The settings for the display and audible
warnings ar
e contr
olled via the Easy
Connect*.
Automatic activation
 on

Driver assistance systems
Key to the Fig. 292:
Symbol Meaning
A Front camera area
B Right camera area
C Rear camera area
D Left camera area
 Exit the current display.
 Three-dimensional views
 Depending on the equipment: con-
necting and disconnecting the P
ark
-
Pil
ot sound.
 Adjust the display: bright, contrast
and colour. The aerial view is generated by combining
the images fr
om all the camer
as

L