change time SUBARU IMPREZA 2017 5.G Navigation Manual

This supplement contains explanations and instructions for correctly operating the following systems. · Navigation System · Audio and Visual System · Handsfree System · APPSIf your vehicle contains one of the systems above, be sure to check the contents of this supplement carefully.If you transfer the ownership of the vehicle to another person, make sure that this supplement is provided with the Owner’s Manual inside the vehicle.The information, speci!cations and illustrations in this supplement are valid at the time of publication. Fuji Heavy Industries reserves the right to change the speci!cations and design without prior notice, with no obligation to perform the same or equivalent changes to vehicles sold in the past.This Owner’s Manual supplement applies to all models, and describes all devices, including manufacturer-installed options. This means that information may be included about devices that are not installed in your vehicle.Refer to P.14 for details on each of the di"erent models.
SUBARU STARLINK is the “in-car connectivity system” available on select Subaru vehicles.
FUJI HEAVY INDUSTRIES LTD., TOKYO, JAPAN
is a registered trademark of Fuji Heavy Industries Ltd.
©Copyright 2016, Fuji Heavy Industries Ltd.
Foreword


1
docstructure.indb 12016/10/27 15:27:29

No.FunctionPage
Select to change the language.When
(Synchronized Language Settings) is selected, the language setting in the system is synced to the language setting in the meter cluster.
-
Select to change the unit of measure for distance.
When (Units
synchronized) is selected, the unit of measure setting in the system is synced to the unit of measure setting in the meter cluster.
-
Select to set the length of time that the camera image remains displayed when the shift lever/select lever is shifted from “R” to “D”.-
Select to update system software versions. 70
Select to turn the available new system software version check on/off.70
Select to turn the automatic downloading of updates on/off.70
Select to display the system information.-
Select to change the Bluetooth system name. -
No.FunctionPage
Select to reset all setup items.The audio system restarts automatically after resetting factory data. To complete the reset process, turn the ignition switch to the “LOCK”/“OFF” position after the audio system has restarted, and then turn to the “ACC” or “ON” position after approximately 3 minutes.
-
*2Select to automatically adjust Daylight Saving Time.-
Select to display the software license.-
*1: 8-inch with Navi system/8-inch system only
*2: Only for 8-inch with Navi system. It may be available depending on the software version.
SETTING THE DRIVER PROFILE
ADDING A NEW PROFILE
1. Display the general settings screen. (
WP.62)
2. Select (Driver Pro

OTHER SETTINGS
74
No.Function
Select to set the time displayed on the multi function display.“Auto”: The time is automatically corrected based on the following.
X8-inch with Navi systemGPS time information
X8-inch system/6.5-inch systemTime information from the connected cellular phone
“Manual”: The time is adjusted manually. After selecting “Manual”, use the multi function display to set the time. Refer to the vehicle Owner’s Manual for details on the setting method.
Select to set and customize the interior light off delay timer.
Select to set and customize the operation of the defogger.
Select to set the settings used when the keyless access function was operated.
Select to turn the one-touch lane changer on/off.
docstructure.indb 742016/10/27 15:27:57

PLAYING BACK THE CACHE MANUALLY
The broadcast cached in the program cache can be played
back manually.
1. Select (Replay). (
WP.122)
2. Select the desired cache radio operation button.
No.Information/Function
Shows the current playback location.The playback location can be changed by dragging the sliders.
Returns to the live radio broadcast.
No.Information/Function
Select: Skips forward 10 seconds.Select and hold: Fast forwards continuously.
Pauses or plays the radio broadcast.
Select: Skips backward 10 seconds.Select and hold: Fast rewinds continuously.
Exits cached playback.
NOTE
lThe time displayed on the bar scale may differ from the actual time.

HOW TO SUBSCRIBE
SiriusXM audio services require a subscription sold
separately, or as a package, by Sirius XM Radio Inc.
Subscription Details: Your SiriusXM service will
automatically stop at the end of your trial unless you
decide to subscribe. If you decide to continue service, the
paid subscription plan you choose will automatically renew
and you will be charged the rate in effect at that time and
according to your chosen payment method. Fees and taxes
apply. You may cancel at any time by calling 1-866-635-
2349. See the SiriusXM Customer Agreement for complete
terms at www.siriusxm.com. All fees and programming
subject to change.

2. Select the desired cache radio operation button.
No.Information/Function
Shows the current playback location.The playback location can be changed by dragging the sliders.
Returns to the live radio broadcast.
Select: Access the desired program. Skips forward through program.Select and hold: Fast forwards continuously. The fast forward speed increases the longer the button is held down.
No.Information/Function
Pauses or plays the radio broadcast.
Select: Access the desired program. Skips back through program.Select and hold: Fast rewinds continuously. The fast rewind speed increases the longer the button is held down.
Exits cached playback.
NOTE
lThe time displayed on the bar scale may differ from the actual time.
SEARCHING BY FEATURED FAVORITES
Featured Favorites are a collection of channels that are
created by the SiriusXM programming team that are
updated several times throughout the year.
The desired Featured Favorite channel can be selected
from the list screen. (
WP.134)
RADIO OPERATION
133
Audio
6
docstructure.indb 1332016/10/27 15:28:20

SETUP
186
No.Function
Select to set the route type.
Select to set avoidance criteria for the route calculation.
Select to turn the display for the junction view on/off.
Select to set the screen mode.“Auto”: Select to change the screen to day or night mode depending on the position of the headlight switch.“Day”: Select to always display the map in day mode.“Night”: Select to always display the map in night mode.
Select to register or edit the home address.
• When home has been registered, (Change Home) is displayed.• For details on registering or editing the address:
WP.168
Select to register or edit the work address.
• When work has been registered, (Change Work) is displayed.• For details on registering or editing the address:
WP.168
Select to turn the display for POI icons on/off.
No.Function
Select to set whether the arrival time is displayed with the 24-hour clock or 12-hour clock. (
WP.178)
Select to set whether to automatically enlarge the map when approaching intersections or turning points during route guidance.
docstructure.indb 1862016/10/27 15:28:42