tow TOYOTA 4RUNNER 2020 Owners Manual (in English)

1
INDEX
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructions and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
Engine maintenance 8
Fuel tank door release & cap 7
Hood release 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel 2-3
Instrument panel light control 8
Keyless entry
1 6
Smart Key system1 7
OVERVIEW FEATURES & OPERATIONS (Continued)
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
Active traction control system 25
Air conditioning/heating 17
Audio 22
Auto lock/unlock
1,2 9
Automatic running boards 12
Automatic transmission 9
Clock 11
Crawl control 27
Cup holders 11
Door locks 10
Downhill assist control system 26
Four-wheel drive 10
Garage door opener (HomeLink
®)3 24
Lights1 & turn signals 18-19
Moonroof1 24
Multi-Information Display (MID) 20
Multi-terrain select 27
Parking brake 11
Power outlets-12V DC 23
Power outlets-120V AC 22
Rear differential lock system 26
Rear seats-Folding 15
Seat adjustments-Front 14
Seat adjustments-Rear 14
Seat heaters/ventilators 16
Seats-Head restraints 14
Seats-Returning 3rd row 16
Seats-Stowing 3rd row 16Steering lock release
12
Steering wheel switches &
telephone controls (Bluetooth
®) 21
Tilt & telescopic steering wheel 12
USB charge-ports 20
USB media port 21
Vehicle Stability Control (VSC)
OFF button 25
Window-Back window
1 13
Windows-Power1 13
Windshield wipers & washers 19
BLUETOOTH® DEVICE
PAIRING SECTION 46-48
Floor mat installation
44
Rear door child safety locks 39
Safety Connect 42
Seat belts 40
Seat belts-Shoulder belt anchor 40
Spare tire & tools 41
Star Safety System
TM 43-44
Tire Pressure Monitoring
(warning) System (TPMS) 39
TOYOTA SAFETY SENSE™ P (TSS-P)
Automatic High Beams (AHB) 38
Dynamic Radar Cruise Control
(DRCC) 35-37
Lane Departure Alert (LDA) 31-34
Pre-Collision System with
Pedestrian Detection (PCS w/PD) 29-31
Quick overview-
Toyota Safety Sense
™ P (TSS-P) 28
Sensors 28
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
62444_4Runner_Text.indd 17/19/19 8:54 PM

15
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Rear seats-Folding
WITH 2ND ROW SEATS
WITH 3RD ROW SEATS (IF EQUIPPED)
(1) Push
(2) Lower
(3) Stow
(5) Fold down
(4) Pull up
(1) Push (2) Lower
(5) Pull up
(3) Fold down
(7) Fold down (6) Push down
(4) Stow
62444_4Runner_Text.indd 157/19/19 8:54 PM

16
Front passenger’s seat
Heater onlyWith ventilators
Driver’s seat
Ventilation Heat
On
Seat heaters/ventilators (if equipped)
FRONT SEATS
The engine switch must be in the “ON” position (without Smart Key) / ”IGNITION
ON” mode (with Smart Key) for use.
Seats-Stowing 3rd row (if equipped)
Seats-Returning 3rd row (if equipped)
(1) Stow(2) Pull up
(3) Pull up (4) Pull up
(5) Fold down
(1) Stow(2) Pull up(3) Pull up (4) Fold down
From inside
From outside
(1) Raise (2) Pull (3) Raise
62444_4Runner_Text.indd 167/19/19 8:54 PM

38
AHB is a safety system designed to help drivers see more of what’s ahead at
nighttime while reducing glare for oncoming drivers. When enabled, AHB uses an
in-vehicle camera to help detect the headlights of oncoming vehicles and tail lights
of preceding vehicles, then automatically switches between high and low beams
as appropriate to provide the most light possible and enhance forward visibility.
By using high beams more frequently, the system may allow earlier detection of
pedestrians and obstacles.
Refer to the Toyota Owner’s Manual for additional information on AHB operation,
settings adjustments, limitations, and precautions before attempting to use it.
Automatic High Beams (AHB)
(1) With the engine switch in IGNITION ON mode, turn the headlight switch to

“
” or “AUTO” position.
(2) Push lever away from you.
(3) Press the “
” switch.

The AHB indicator will come on when the headlights are turned on automatically
to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
The AHB indicator will turn off. To turn switch to “
” position and the manual
high beam indicator “
” turns on.
When all of these conditions are met, high beams will be automatically turned on
(after approximately 1 second):
• Vehicle speed is above approximately 21 mph (34 km/h.)
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights turned
on.
• There are few street lights on the road ahead.
If any of these conditions occur, the system is designed to automatically turn off
high beams:
• Vehicle speed drops below approximately 17 mph (27 km/h.)
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
(1) (2)
TOYOTA SAFETY SENSE™
62444_4Runner_Text.indd 387/19/19 8:55 PM