display TOYOTA C-HR 2019 (in English) User Guide

27
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
(2)
(1)
563/*/(5)&-%"4:45&.0/0''
Press the LDA switch to turn the LDA system on. Depress again to turn it off.
Note: The system will continue in the last state it was in (ON or OFF) when the
engine is started again.
Refer to a Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
LANE DEPARTURE ALERT
LDA function display
Lane marker Steering assist indicator
LDA indicator
-BOF%FQBSUVSF"MFSU -%"X4"
JOEJDBUPSGMBTIFTBNCFSXIFOPQFSBUJOH

28
The LDA w/SA function
displays when the Multi-Information Display (MID) is
switched to the driving assist system information screen.
(1) The system displays solid white lines on the LDA indicator when visible \
lane
markers on the road are detected. A side flashes orange to alert the dri\
ver when the
vehicle deviates from its lane.
(2) The system displays outlines on the LDA indicator when lane markers on t\
he
road are not detected or the function is temporarily cancelled.
Note: When operational conditions are no longer met, the function may be\

temporarily canceled. However, when the operational conditions are met a\
gain,
operation of the function is automatically restored. For example, LDA w/\
SA
may not function on the side(s) where white/yellow lines are not detec\
table.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
LANE DEPARTURE ALERT (CONTINUED)
DISABLING STEERING ASSIST
(1) Press “” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches and select the Steering Assist function and then
press “
”.
(3) Press “
” each time to change the setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LDA w/SA system and setting adjustments continues\
in
the same condition regardless of Ignition cycle until changed by the dri\
ver or
the system is reset.
TOYOTA SAFETY SENSE™
ADJUSTING LDA ALERT SENSITIVITY
The driver can adjust the sensitivity of the LDA (warning) function fr\
om the
Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front tire crosses the
lane marker.
Normal - Is designed to warn approximately when the front tire crosses
the lane marker.
(1) Press “
” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches and select the Alert function and then press
“
” to set sensitivity to Normal or High.
(3) Press “
” each time to change the setting.
(4) Press “
” to go back to the menu.

29
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
48":8"3/*/(4:45&.
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
swaying, the system alerts the driver using a buzzer sound and a warning\
displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.

1SFTTiwTXJUDIFTUPGJOEBOETFMFDU.

 Press “
w switches to find the Steering Assist function and then press
“
w

1SFTTi
wFBDIUJNFUPDIBOHFUIFTFUUJOH

1SFTTi
wUPHPCBDLUPUIFNFOV

1SFTTi
wTXJUDIFTUPGJOEBOETFMFDU.

 Press “
w switches to find the Steering Assist function and then press
“
w

1SFTTi
wFBDIUJNFUPDIBOHFUIFTFUUJOH

1SFTTi
wUPHPCBDLUPUIFNFOV
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
"%+645*/(48":"-&354&/4*5*7*5:
%*4"#-*/(-%"48":8"3/*/(4:45&.

30
DRCC helps maintain a pre-set distance to a preceding vehicle when the p\
receding
vehicle is traveling at a lower speed. This mode is always selected firs\
t when the
cruise control button is depressed. Constant speed cruise control mode i\
s also
available. Full-Speed Range DRCC is designed to function at speeds betwe\
en 0 to
approximately 110 MPH and is intended for highway use.
TOYOTA SAFETY SENSE™
Full-Speed Range Dynamic Radar Cruise
Control (DRCC)
Display
Set speed
Dynamic Radar Cruise Control
vehicle-to-vehicle distance button
Cruise control switch Indicators
(3)
Decrease
speed Increase
speed
Cancel1
Resume2
Set
TURNING SYSTEM ON/OFF
Refer to page 32 for switching to Constant Speed (Cruise) Control Mode\
.(1)
Push once: On
Push again: Off
ADJUSTING SET SPEED
1
The set speed may also be cancelled by depressing the brake pedal.
2 The set speed may be resumed once vehicle speed exceeds 25 mph.
Vehicle will cruise at a set speed, decelerate to maintain selected dist\
ance from a
slower vehicle traveling in front and accelerate back up to the selected\
speed if the
vehicle in front changes lanes or speeds up.

(1) Push the ON-OFF button. The “RADAR READY” or “
” indicator will come on.
(2) Push the lever down to SET speed, push it up to Resume and pull it or de\
press brake to Cancel.
(3) Push up to increase the set speed, push down to decrease (1 mph [1.6 km\
/h] or 1 km/h [0.6 mph]).
(2)

41
To begin the Bluetooth® Pairing process, press the HOME button on the faceplate of
your multimedia system.
Bluetooth® Pairing for your phone
Pairing your phone is the first step in connecting with your Toyota for hands-free
DBMMJOHBOEGPSBVEJPTUSFBNJOHWJB#MVFUPPUI5IJTQBJSJOHQSPDFTTJTRVJDLBOEFBTZ
All you have to do is setup the phone and multimedia system to form a connection.
1

Select "Bluetooth", then select
"Add New Device"on display
screen. Ensure Bluetooth is turned on for
your device.
Select "Device Name".
iPhone bluetooth MenuAndroid bluetooth Menu
1
<000300340050004e004600030022004f004500530050004a00450003004500460057004a0044004600540003004e0042005a0003004900420057004600030054004d004a004800490055004d005a00030045004a00470047004600530046004f0055000300
34002600350035002a002f0028003400030054004400530046><0046004f0003004d0042005a00500056005500030045004600510046004f0045004a004f004800030050004f0003004e0042004f0056004700420044005500560053004600530003005000470003004500460057004a0044004600030042004f0045000300
22004f004500530050004a0045000300300034000300570046>STJPO
Check the display on your smart
phone. Does the PIN XXXX
match the PIN displayed? If it
does select "Pair".
1SFTT<.&/6>POUIFGBDFQMBUF
UIFOTFMFDU

42
BLUETOOTH® DEVICE PAIRING
"Connecting" displays while
device is forming the connection
to your multimedia system.&OBCMF/PUJGJDBUJPOT UFYU
NFTTBHF
8IJMFQBJSJOHZPVS
device message will display:
"You may need to allow
message access on your
phone".
/PUF:PVNBZBMTPTFMFDU
"Skip" on display screen to skip
enabling notifications. If skipped
proceed to
Step 8.
Turn on "Show Notifications" for
iPhone or "ON" for Android.A confirmation will appear once
your phone has been paired and
connected.
iPhoneAndroid
Bluetooth® Pairing for your phone (cont.)
STEP 6
STEP 8
STEP 7
STEP 9