display TOYOTA CAMRY 2020 (in English) Owner's Manual

39
48*5$)*/(50$0/45"/541&&% $36*4&
$0/530-.0%&
4&55*/($0/45"/541&&% $36*4&
$0/530-
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic
deceleration via the cruise control is not possible, the display will flash and the
buzzer will sound to alert the driver. An example of this would be if another driver
cuts in front of you while you are following a vehicle. Depress the brake pedal to
ensure an appropriate vehicle-to-vehicle distance.
If you are already using DRCC “”, push button again to turn the system off
first, then push and hold button for at least 1.5 seconds to switch.
Note: When the engine is turned off, it will automatically default to DRCC.

Acceleration when there are no longer any preceding vehicles driving
slower than the set speed
The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
1.5 seconds
"%+645*/(%*45"/$& $0/5*/6&%

Refer to the Toyota Owner’s Manual for additional information on DRCC operation,
settings adjustments, limitations, and precautions before attempting to use it.To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SET SPEED on
page 37.
Increase speed
Decrease speed
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES

42
SAFETY & EMERGENCY FEATURES
Safety Connect® (if equipped)
Tire Pressure Monitoring (warning) System (TPMS)
The tire pressure detected by the tire pressure warning system can
CFEJTQMBZFEPOUIFNVMUJJOGPSNBUJPOEJTQMBZ .*%

Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specifications should
turn off the light.
The tire pressure warning system can be selected on “” of the multi-
JOGPSNBUJPOEJTQMBZ .*%

System rest initialization

4FMFDU“Vehicle Settings” and then push “” JODIEJTQMBZ
“” and then
push and hold “
w JODIEJTQMBZ


4FMFDUi5184wBOEUIFOQVTIi
”.

4FMFDUi4FU1SFTTVSFwUIFOQVTIBOEIPMEi
” until the warning light blinks
three times.
Safety Connect is a subscription-based telematics service that uses Global
1PTJUJPOJOH4ZTUFN (14
EBUBBOEFNCFEEFEDFMMVMBSUFDIOPMPHZUPQSPWJEFTBGFUZ
and security features to subscribers. Safety Connect is staffed with live agents at
the Toyota response center, which operates 24 hours per day, 7 days per week.
Services for subscribers include:
• Automatic collision notification
• Stolen vehicle locator
t&NFSHFODZBTTJTUBODF i404wCVUUPO

• Enhanced roadside assistance
For additional information refer to the “Owner’s Manual” or visit www.Toyota.com/
connected-services.
Microphone
LED Indicators“SOS” button
4.2-inch display 7-inch display

47
To begin the Bluetooth® Pairing process, press the HOME button on the faceplate of
your multimedia system.
Bluetooth® Pairing for your phone
Pairing your phone is the first step in connecting with your Toyota. This pairing
process is quick and easy. All you have to do is setup the phone and multimedia
system to form a connection.
1

Select "Bluetooth", then select
"Add New Device"on display
screen. Ensure Bluetooth is turned on for
your device.
Select "Device Name".
iPhone bluetooth MenuAndroid bluetooth Menu
1
Some Android devices may have slightly different SETTINGS screen layout depending on manufacturer of device and Android OS version.
Check the display on your smart
phone. Does the PIN XXXX
match the PIN displayed? If it
does select "Pair".
Press [MENU] on the audio system faceplate, then select "Setup" on display
screen.STEP 1
STEP 2
STEP 4
STEP 3
STEP 5
Audio / Audio Plus / Premium Audio

48
BLUETOOTH® DEVICE PAIRING
Bluetooth® Pairing for your phone (cont.)
"Connecting" displays while
device is forming the connection
to your multimedia system.&OBCMF/PUJGJDBUJPOT UFYU
NFTTBHF
8IJMFQBJSJOHZPVS
phone a message will be
EJTQMBZFE
"You may need to allow
message access on your
phone".
/PUF:PVNBZBMTPTFMFDU
"Skip" on display screen to skip
enabling notifications. If skipped
proceed to
Step 8.
Turn on "Show Notifications" for
iPhone or "ON" for Android.A confirmation will appear once
your phone has been paired and
connected.
iPhoneAndroid
STEP 6
STEP 8
STEP 7
STEP 9