tow TOYOTA COROLLA HATCHBACK 2021 Owners Manual (in English)

39
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Automatic High Beams (AHB)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
AHB is a safety system designed to help drivers see more of what’s ahead\
at nighttime
while reducing glare for oncoming drivers. AHB uses a forward-facing camera t\
o
help detect the headlights of oncoming vehicles and tail lights of preceding\
vehicles,
then automatically switches between high and low beams as appropriate to pro\
vide
the most light possible and enhance forward visibility. By using high beams\
more
frequently, the system may allow earlier detection of pedestrians and obstacles.
Refer to the Toyota Owner’s Manual for additional information on AHB opera\
tion,
settings adjustments, limitations, and precautions before attempting to use it.
(2) (1)
(1) Press the “
” switch.
(2) Push lever away from you with the headlight switch is in the “
” or “AUTO”
position.
The AHB indicator will come on when the headlights are turned on automatica\
lly
to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB
system off.
The AHB indicator will turn off. To turn switch to “
” position and the manual
high beam indicator “
” turns on.
When all of the following conditions are met, the high beams will be automat\
ically
turned on (after approximately 1 second): • Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lig\
hts turned on.
• There are few streetlights on the road ahead.
If any of the following conditions occur, the high beams will be automatic\
ally turned off: • Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on\
.
• There are many streetlights on the road ahead.

44
SAFETY & EMERGENCY FEATURESSpare tire & tools
TOOL LOCATION
REMOVING THE SPARE TIRE
Towing eyelet
Wheel nut wrenchJack
Spare tireJack handle
Refer to the Owner’s Manual for jack positioning and tire changing procedu\
res.
(2) Loosen the center fastener that secures the spare tire.
(1) Remove the deck board.
(When the luggage cover is installed) (When the luggage cover is not installed)

45
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Tire repair kit components
Sticker
Hose Air release cap
Rubber stopper
Power plug Air pressure gaugeCompressor switch
Tire repair kit & tools
TOOL LOCATION
Towing eyeletWheel nut wrench*
Jack**If equipped.Emergency tire
puncture repair kitEmergency tire
puncture repair kit
Jack handle*
Jack and tools
Refer to the Owner’s Manual for jack positioning and tire changing procedu\
res.