stop start TOYOTA RAV4 HYBRID 2018 Owners Manual (in English)

2
OVERVIEWInstrument panel
Steering wheel controls
1 If equipped
2 For details, refer to the “Navigation System Owner’s Manual.” 3 For details, refer to the “2018 Entune™ Audio Quick Reference Gui\
de.”
Audio control switches1,2Multi-Information Display
(MID) controls2,3
Dynamic Radar Cruise
Control (DRCC) vehicle-
to-vehicle distance
button
Dynamic Radar Cruise
Control (DRCC) or Cruise
control switch
“ENGINE START STOP” button
Windshield wiper and washer controls Instrument cluster
Headlight, turn signal, fog light and
Auto High Beam (AHB) controls
Fuel tank door release lever
Hood lock release lever
Power Liftgate main switch1
Instrument panel
light control dial
Outside rear view
mirror switches
Heated steering
wheel switch1
Lane Departure Alert
(LDA) switch
Tire Pressure Monitoring (warning)
System (TPMS) reset switch1
Voice command
switch2
Tilt and telescopic
steering lock release lever
2018_RAV4-HV_QRG_V3-JA0804.indd 28/7/17 4:03 PM

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
3
1
If equipped
2 For details, refer to the “Navigation System Owner’s Manual.” 3 For details, refer to the “2018 Entune™ Audio Quick Reference Gui\
de.”
Multi-Information Display
(MID) controls2,3
Dynamic Radar Cruise
Control (DRCC) vehicle-
to-vehicle distance
button
Dynamic Radar Cruise
Control (DRCC) or Cruise
control switch
Vehicle Stability Control
(VSC) OFF switch
Emergency flasher switch
“ENGINE START STOP” button
Audio
1,2/Navigation1,2,3 system
Bird’s Eye View Camera
1 ON/OFF switch
12V DC power outlet
12V DC power outlet
Driving mode select switches
EV drive mode switch USB/AUX port
2
Windshield wiper de-icer switch1
Seat heater switches1
Automatic air conditioning controls
Windshield wiper and washer controls
Outside mirror/
Rear window defogger switch
2018_RAV4-HV_QRG_V3-JA0804.indd 38/7/17 4:05 PM

6
Keyless entry
OVERVIEW
NOTE: Gear shift lever must be in Park and brake pedal depressed.
Without depressing the brake pedal, pressing the “ENGINE START STOP” swit\
ch
wiMM change the oQeration mode in succession from
Push
ONCE: Driver door TWICE: All doors
Carry remote
Smart key feature
Front door lock
Touch Carry remote
Smart key feature
Grasp
Front door unlock*
Push
Beep sound can be switched ON or OFF. Refer to the Owner’s Manual for more
details.
NOTE:
If a door is not opened within 60 seconds of unlocking, all doors will relock
for safety.
Push and hold
* Driver door unlocking function can be programmed to unlock driver door \
only, or
all doors. Grasping passenger door handle will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
Push
to lock
Push to unlock
Carry remote
Smart key feature
All-door unlock and lock
PANIC BUTTON
Power Liftgate hold button
not equipped on all models
LOCKING OPERATION
UNLOCKING OPERATION
START FUNCTION
POWER 8I5)065 45A35I/( ):#3I% 4:45&.
108&3 -I'5(A5& -0$,6/-0$, I' &26I11&%

2018_RAV4-HV_QRG_V2-JA0803.indd 68/4/17 4:35 AM

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
7
Smart Key system
NOTE: Gear shift lever must be in Park and brake pedal depressed.
Without depressing the brake pedal, pressing the “ENGINE START STOP” swit\
ch
wiMM change the oQeration mode in succession from
Beep sound can be switched ON or OFF. Refer to the Owner’s Manual for more
details.
NOTE:
If a door is not opened within 60 seconds of unlocking, all doors will relock
for safety.
Push and hold
* Driver door unlocking function can be programmed to unlock driver door \
only, or
all doors. Grasping passenger door handle will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
All-door unlock and lock
PANIC BUTTON
Push
Depress
brake pedal
Off - All systems OFF.
Accessory - Some electrical components can be used.
On - All electrical components can be used; engine not running.
START FUNCTION
POWER 8I5)065 45A35I/( ):#3I% 4:45&.

2018_RAV4-HV_QRG_V2-JA0803.indd 78/4/17 4:35 AM

10
Hybrid Synergy Drive System
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline \
engine
and electric motor to provide the most efficient combination of power fo\
r the
vehicle. To conserve energy, when the brakes are applied the braking for\
ce
generates electricity which is then sent to the traction battery. In add\
ition, the
engine shuts off when the vehicle is stopped. The benefits are better fu\
el economy,
reduced vehicle emissions and improved performance.
NOTE: Fuel consumption and energy information of the Hybrid System are shown on the Multi-Information Display and/or navigation system
screen (if equipped).
1. Ensure tire pressures are maintained at levels specified in the Owner\
’s Manual.
2. Link trips to reduce engine cold starts whenever possible.
3. Avoid driving at speeds that are higher than necessary, especially on\
the highway.
4. When possible, avoid sudden stops to maximize regenerative braking en\
ergy.
5. Minimize use of the Air Conditioning.

Put the selector lever in “P.”

Depress the brake pedal, and “
” will be displayed on the Multi-Information
Display.

1ress the i108&3w switch CriefMy and firmMy.

The “READY” light will blink. After a few seconds, when the light \
remains steady
and a beep sounds, you may begin driving.
Shift the shift lever to “S” position from “D” position.
+ 6Qshift Qush and reMease

- %ownshift QuMM and reMease

Downshifting increases power going uphill, or provides engine braking do\
wnhill. For
best fuel economy during normal driving conditions, always drive with th\
e shift lever
in the “D” position.
* The engine switch must be “ON” and the brake pedal depressed to sh\
ift from
Park.
Automatic door locks can be programmed to operate in different modes, or\
turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-%oors MocL when the vehicMe sQeed goes aCove aQQroYimateMy  mQh  Lmh
.
Driver’s door linked door unlocking function
-Doors unlock when the engine switch is set to OFF and driver’s door i\
s opened.
Refer to the Owner’s Manual for more details.
Auto lock/unlock
Switches the items of the odometer and trip meter display by pressing th\
e “TRIP”
switch. To reset trip meter, press and hold.
FEATURES & OPERATIONS
TIPS FOR IMPROVED FUEL ECONOMY
i4w 4&26&/5IA-
.0%&
STARTING THE HYBRID SYSTEM
2018_RAV4-HV_QRG_V2-JA0803.indd 108/4/17 4:35 AM

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
11
Hybrid transmission
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline \
engine
and electric motor to provide the most efficient combination of power fo\
r the
vehicle. To conserve energy, when the brakes are applied the braking for\
ce
generates electricity which is then sent to the traction battery. In add\
ition, the
engine shuts off when the vehicle is stopped. The benefits are better fu\
el economy,
reduced vehicle emissions and improved performance.
NOTE: Fuel consumption and energy information of the Hybrid System are
shown on the Multi-Information Display and/or navigation system
screen (if equipped).
1. Ensure tire pressures are maintained at levels specified in the Owner\
’s Manual.
2. Link trips to reduce engine cold starts whenever possible.
3. Avoid driving at speeds that are higher than necessary, especially on\
the highway.
4. When possible, avoid sudden stops to maximize regenerative braking en\
ergy.
5. Minimize use of the Air Conditioning.

Put the selector lever in “P.”

Depress the brake pedal, and “
” will be displayed on the Multi-Information
Display.

1ress the i108&3w switch CriefMy and firmMy.

The “READY” light will blink. After a few seconds, when the light \
remains steady
and a beep sounds, you may begin driving.
Reverse
Neutral
Drive
R
N
D
N
“S” mode
+
-
Park*P
Shift the shift lever to “S” position from “D” position.

+ 6Qshift Qush and reMease


- %ownshift QuMM and reMease

Downshifting increases power going uphill, or provides engine braking do\
wnhill. For
best fuel economy during normal driving conditions, always drive with th\
e shift lever
in the “D” position. *
The engine switch must be “ON” and the brake pedal depressed to sh\
ift from
Park.
Automatic door locks can be programmed to operate in different modes, or\
turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-%oors MocL when the vehicMe sQeed goes aCove aQQroYimateMy  mQh  Lmh
.
Driver’s door linked door unlocking function
-Doors unlock when the engine switch is set to OFF and driver’s door i\
s opened.
Refer to the Owner’s Manual for more details.
Auto lock/unlock
Switches the items of the odometer and trip meter display by pressing th\
e “TRIP”
switch. To reset trip meter, press and hold.
Odometer/trip meter display
Parking brake
Pull
(2) Push
(1) Pull slightly(3) Lower
SetRelease
i4w 4&26&/5IA-
.0%&
2018_RAV4-HV_QRG_V2-JA0803.indd 118/4/17 4:35 AM

40
SAFETY & EMERGENCY FEATURES
5here are two tyQes of 5oyota fMoor mats carQeted and aMMweather. &ach vehicMe
has model-specific floor mats. Installation is easy.
5o LeeQ your fMoor mat QroQerMy Qositioned, foMMow these steQs
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep\
the mat in place.
• Install floor mats right side up.
Star Safety System™
A/5I-0$, #3A,& 4:45&. A#4

Toyota’s ABS sensors detect which wheels are locking up and limits wh\
eel lockup
by “pulsing” each wheel’s brakes independently. Pulsing release\
s brake pressure
repeatedly for fractions of a second. This helps the tires attain the tr\
action that
current road conditions will allow, helping you to stay in directional c\
ontrol.
#3A,& A44I45 #A

Brake Assist is designed to detect sudden or “panic” braking, and \
then add braking
pressure to help decrease the vehicle’s stopping distance. When there\
’s only a split
second to react, Brake Assist can add additional brake pressure more qui\
ckly than
just the driver alone can.
53A$5I0/ $0/530- 53A$

VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
surfaces Cy aQQMying CraLe force to the sQinning wheeM s
.
Toyota’s TRAC sensors are activated when one of the drive wheels star\
ts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. \
This
transfers power to the wheels that still have traction to help keep you \
on track.
&-&$530/I$ #3A,& '03$& %I453I#65I0/ &#%

5oyotas A#4 technoMogy has &Mectronic #raLeforce %istriCution &#%
to heMQ
maintain control and balance when braking. Abrupt stops can cause a vehi\
cle to tilt
forward, reducing the braking power of the rear wheels. EBD responds to \
sudden
stops by redistributing brake force to enhance the braking effectiveness\
of all four
wheels.
Your vehicle comes standard with the Star Safety System
TM, which combines Anti-
MocL #raLing 4ystem A#4
, #raLe Assist #A
, &Mectronic #raLeforce %istriCution
&#%
, 4mart 4toQ 5echnoMogy 445
, 7ehicMe 4taCiMity $ontroM 74$
and 5raction
$ontroM 53A$
.
Refer to the Owner’s Manual for more details and important information on limitations
to these systems.
4.A35 4501 5&$)/0-0(: 445

Smart Stop Technology automatically reduces engine power when the accele\
rator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are a\
pplied
firmly for longer than one-half second at speeds greater than five miles\
per hour.
SST doesn’t engage if the brake pedal is depressed before the acceler\
ator pedal,
allowing vehicles to start on a steep hill and safely accelerate without\
rolling
backward.
7&)I$-& 45A#I-I5: $0/530- 74$

VSC helps prevent loss of traction during cornering by reducing engine p\
ower and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle i\
s traveling.
When it senses that the front or rear wheels begin to lose traction, VSC\
reduces
engine power and applies braking to selected wheels. This helps restore \
traction
and vehicle control.
2018_RAV4-HV_QRG_V2-JA0803.indd 408/4/17 4:36 AM

41
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Floor mat installation
5here are two tyQes of 5oyota fMoor mats carQeted and aMMweather. &ach vehicMe
has model-specific floor mats. Installation is easy.
5o LeeQ your fMoor mat QroQerMy Qositioned, foMMow these steQs
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep\
the mat in place.
• Install floor mats right side up.
Always align the Δ marks
Star Safety System™
Toyota’s ABS sensors detect which wheels are locking up and limits wh\
eel lockup
by “pulsing” each wheel’s brakes independently. Pulsing release\
s brake pressure
repeatedly for fractions of a second. This helps the tires attain the tr\
action that
current road conditions will allow, helping you to stay in directional c\
ontrol.
Brake Assist is designed to detect sudden or “panic” braking, and \
then add braking
pressure to help decrease the vehicle’s stopping distance. When there\
’s only a split
second to react, Brake Assist can add additional brake pressure more qui\
ckly than
just the driver alone can.
53A$5I0/ $0/530- 53A$

VSC helps prevent loss of traction during cornering by reducing engine p\
ower, and
Traction Control helps maintain traction on loose gravel and wet, icy, o\
r uneven
surfaces Cy aQQMying CraLe force to the sQinning wheeM s
.
Toyota’s TRAC sensors are activated when one of the drive wheels star\
ts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. \
This
transfers power to the wheels that still have traction to help keep you \
on track.
5oyotas A#4 technoMogy has &Mectronic #raLeforce %istriCution &#%
to heMQ
maintain control and balance when braking. Abrupt stops can cause a vehi\
cle to tilt
forward, reducing the braking power of the rear wheels. EBD responds to \
sudden
stops by redistributing brake force to enhance the braking effectiveness\
of all four
wheels.
Your vehicle comes standard with the Star Safety System
TM, which combines Anti-
MocL #raLing 4ystem A#4
, #raLe Assist #A
, &Mectronic #raLeforce %istriCution
&#%
, 4mart 4toQ 5echnoMogy 445
, 7ehicMe 4taCiMity $ontroM 74$
and 5raction
$ontroM 53A$
.
Refer to the Owner’s Manual for more details and important information on limitations
to these systems.
Smart Stop Technology automatically reduces engine power when the accele\
rator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are a\
pplied
firmly for longer than one-half second at speeds greater than five miles\
per hour.
SST doesn’t engage if the brake pedal is depressed before the acceler\
ator pedal,
allowing vehicles to start on a steep hill and safely accelerate without\
rolling
backward.
VSC helps prevent loss of traction during cornering by reducing engine p\
ower and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle i\
s traveling.
When it senses that the front or rear wheels begin to lose traction, VSC\
reduces
engine power and applies braking to selected wheels. This helps restore \
traction
and vehicle control.
2018_RAV4-HV_QRG_V2-JA0803.indd 418/4/17 4:36 AM