steering TOYOTA tC 2012 Accessories, Audio & Navigation (in English)

Page 7 of 76


7
<CRB3643-A/S>7

Basic Operation
Your audio system works when the
ignition switch is in the “ACC” or
“ON” position.
If the Audio screen does not
display, press [POWER]. (Refer to
page 8.)
NOTICE
To avoid draining the battery,
do not leave the car audio on
longer than necessary when the
engine is not running.
Audio operations are carried out by
either of the operations explained
below.
The touch keys on the Display
screen, touch buttons or the
POWER/MULTI-SELECTOR (Refer
to page 8)
The Steering Switch (Refer to
page 9)
The Display screen touch keys,
touch buttons and POWER/
MULTI-SELECTOR are used by
way of example when explaining
operations in this manual.

Page 9 of 76


9
<CRB3643-A/S>9

Steering Switch Operations
This section contains an explanation regarding audio -related operations involving utilization of the steering switch.
1 [MODE]Each time this button is pressed, the source changes in the order indi-cated below.FM d Disk (CD or MP3 or WMA) d USB or iPod d Pandora d Bluetooth audio d A/V or AUX d SAT d AM (d FM)* When the power is on or after the end of a traffic report, the source is automatically switched back to what was being used immediately before-hand.
* Any unconnected devices, discs or
sources that cannot be played back due to antenna errors or the like are skipped over in the above -noted sequence.
If the MODE button is kept pressed down for 0.8 seconds or more, a beep is emitted and the following
actions are performed.
•If you press the button again, play-back is resumed.
SourceActions when the button
is kept pressed down for
0.8 seconds of longer
CDPlayback is paused.
MP3
WMA
USB
iPod
Pandora
Bluetooth
audio
AMThe sound is muted.
FM
SAT
AUXVideo playback continues,
but the sound is muted.A / V
2 [Λ]Actions vary depending on the source that is being selected and the length of time the button is pressed down.
SourceActions
when
pressed
down
Actions when
the button is
kept pressed
down for 0.8
seconds of
longer
CDThe next
track is
played
back.
Nothing
happens.
MP3The next
file is
played
back.
The first song
in the next
folder is played
back.
WMA
USBThe next
file is
played
back.
The first song
in the next
folder is played
back.
iPodThe next
file is
played
back.
Nothing
happens.
PandoraThe next
station is
tuned in.
Nothing
happens.

Page 58 of 76


58
<CRB3643-A/S>58

Using Hands-Free
Phoning
Explanations regarding how to use
hands-free phoning appear below.
You will be ale to maintain direct
control of your cell phone even
when using hands-free phoning.
Making Calls
Touch [] to display the Phone
screen. You can make outgoing calls using the PHONE screen.* This is the same as pressing [Off Hook] on the steering switch.
When the phone and the micro-phone are not connected, it is not possible to make a call.
Dialing phone numbers
Make phone calls by touching on the number keypads on the screen to dial phone numbers.Dial phone numbers by touching on the number keypads and then touch-ing [] on the Phone screen.Touch [] to cancel the previous number.

Page 60 of 76


60
<CRB3643-A/S>60

Taking Phone Calls
The following screen appears when a call comes in.
[]Use to answer the
phone.
[]Use to hang up
without answering the
phone.
[Volume]Use to adjust the ring
volume. Touch [+] to
increase the volume;
touch [–] to decrease
the volume.
The Steering Switch (On Hook/
Off Hook) and Microphone
After connecting the hands-free device, you can use the steering switch for simple hands-free phoning operations.
(Off Hook)
When there are no
calls, press this icon
to display the Phone
screen.
Press to answer
incoming phone calls.
When the phone is set
to Call Waiting and a
call comes in while you
are on the phone, use
this to toggle between
the calls.
(On Hook)
Press this icon to avoid
incoming calls.
Press to hang up
during a call.
The location of the microphone is shown below. You don’t need to talk directly into the microphone; your voice will successfully reach the microphone when you talk in a normal, sitting position as you drive.
•Settings You Can Establish
While Using the Phone
When you are on the phone, the fol-lowing screen appears.
[]When the phone
device is set up for
call waiting and a call
comes in on another
line, use this function
to switch to this other
call.
[]Hangs up the phone.
* This is the same as
pressing [On Hook]
on the steering
switch.
[Volume]Adjusts the call
volume. Touch [+] to
increase the volume;
touch [–] to decrease
the volume.