display TOYOTA tC 2013 Accessories, Audio & Navigation (in English)

ROUTE GUIDANCE
65
V573_E

SECTION 3
ROUTE GUIDANCE
z Route guidance screen··················\
··················\
··················\
················· 66
z Typical voice guid ance prompts ··················\
··················\
··················\
··· 69
z Distance and time to destination ··················\
··················\
··················\
·· 71
z Setting and deleting destination ··················\
··················\
················· 72
Adding desti nations··················\
··················\
··················\
··················\
·· 72
Reordering des tinations ··················\
··················\
··················\
············· 73
Deleting dest inations··················\
··················\
··················\
··················\
74
z Setting route ··················\
··················\
··················\
··················\
············· 75
Search condition ··················\
··················\
··················\
··················\
······ 75
Detour setting··················\
··················\
··················\
··················\
··········· 76
Route preference ··················\
··················\
··················\
··················\
····· 77
Starting route from adjacent road ··················\
··················\
················ 78
z Map view ··················\
··················\
··················\
··················\
··················\
·· 78
Display POI
∗ icons ··················\
··················\
··················\
··················\
··· 78
Route overview ··················\
··················\
··················\
··················\
········ 81
Route preview ··················\
··················\
··················\
··················\
·········· 82
Route trace ··················\
··················\
··················\
··················\
·············· 83
∗: Point of Interest

ROUTE GUIDANCE
66
V573_E
During route guidance, various types of
guidance screens can be displayed de-
pending on conditions.
z Screen layout

Distance to the next turn and the
arrow indicating turning direction
Current street name
Distance and travel/arrival time to the destination
Current position
Guidance route
INFORMATION
z If the vehicle goes off the guid-
ance route, the route is searched
again.
z For some areas, the roads have
not been completely digitized in
our database. For this reason, the
route guidance may select road
that should not be traveled on.
z When you arrive at your destina-
tion, the destination name will be
displayed on the top of the
screen. Touching “OFF” clears
the display.

z During freeway driving
During freeway driving, this screen dis-
plays the distance to the next junction
and exit, or POIs in the vicinity of the
freeway exit.

Current position
Points of Interest that are close to a freeway exit
Exit number and junction name
Distance from the current posi-
tion to the exit or junction
Current street name
: To display the selected map of the
exit vicinity.

: To scroll for farther junctions or
exits.
: To scroll for closer junctions or
exits.
: To scroll for the closest three junc-
tions or exits.


Route
guidance screen

ROUTE GUIDANCE
67
V573_E

z When approaching a freeway exit
or junction
When the vehicle approaches the exit or
junction, the guidance screen on the
freeway will be displayed.

Exit number and next street name
Distance from the current posi-
tion to the exit or junction
Current position
“OFF”: Turns off freeway exit or junction
guidance screen.
To view this screen again, push the
“MAP” button or touch the screen con-
figuration button (
). z
When approaching an intersec-
tion
When the vehicle approaches an inter-
section, the intersection guidance screen
will be displayed.

Next street name
Distance to the intersection
Current position
“OFF”: Turns off intersection guidance
screen.
To view this screen again, push the
“MAP” button or touch the screen con-
figuration button (
).

ROUTE GUIDANCE
71
V573_E


When the vehicle is on the guidance
route, the distance and the estimated
travel/arrival time to the destination are
displayed. When the vehicle is not on
the guidance route, the distance and the
direction of the destination are displayed.
When driving on the guidance route and
more than one destination is set, the
distance and the estimated travel/arrival
time from the current position to each
destination are displayed.
1. Touch this touch screen button to
display the following screen.

2. Touch the number button to dis-
play the desired destination. The distance, the estimated travel time
and the estimated arrival time from the
current position to the selected destina-
tion are displayed.
Estimated travel time is dis-
played.
Estimated arrival time is dis-
played.
To switch to estimated arrival
time.
To switch to estimated travel
time.
Displayed while driving off the
guidance route. The destination
direction is indicated by an ar-
row.

INFORMATION
When the vehicle is on the guidance
route, the distance measured along
the route is displayed. Travel time
and arrival time is calculated based
on the set vehicle speed informa-
tion. (See page 110.) However,
when the vehicle is not on the guid-
ance route, the distance is the linear
distance between the current posi-
tion and the destination.


Distance and time to
destination

ROUTE GUIDANCE
73
V573_E

When more than one destination is set,
you can change the arrival order of the
destinations.

1. Touch “Route”.

2. Touch “Reorder” of “Destination”.

3. Select the destination in the order
of arrival by touching the destination
button.
Reordered number of arrival is displayed
on the right side of the screen.
Touching “Undo” will cancel each se-
lected order number from the previously
input number. 4. After selecting the destinations,
touch “OK”.
The system searches for the guidance
route again, and displays the entire route.
Even if
“OK” is not touched, the entire
route is displayed automatically within a
few seconds when the order is fixed.


— Reorderin
g destinations

ROUTE GUIDANCE
74
V573_E
A set destination can be deleted.

1. Touch “Route”.

2. Touch “Delete” of “Destination”.
When more than one destination is set, a
list will be displayed on the screen.

3. Touch the destination for dele-
tion.
“Delete All”: To delete all destinations
on the list.
A message appears to confirm the re-
quest to delete. 4. To delete the destination(s), touch
“Yes”.
If
“Yes” is touched, the data cannot be
recovered.
If “No” is touched, the previous screen
will return.
5. If more than one destination is set,
touch “OK” after deleting the destina-
tions.
The system searches for the guidance
route again, and displays the entire
route.


— Deletin
g destinations

ROUTE GUIDANCE
75
V573_E

You can designate the road conditions of
the route to the destination.

1. Touch “Route”.

2. Touch “Search Condition”.

3. Touch “Quick”, “Quick1”,
“Quick2” or “Short” and touch “OK”.

The entire route from the starting point to
the destination is displayed.
“Guide”: To start guidance.
“Route”: To change a route. (See
pages 72 and 75.)

Setting route —
— Search condition

ROUTE GUIDANCE
78
V573_E
You can start the route guidance from
the adjacent road.
(ex. When route guidance is set on the
freeway, but the vehicle is driven parallel
along the freeway.)

1. Touch “Route”.

2. Touch “Start from Adjacent
Road”.
When there is no adjacent road, this
button will not be displayed. Points of Interest such as gas stations
and restaurants can be displayed on the
map screen. You can also set their
location as a destination and use them
for route guidance.

1. Touch “Map View”.

2. Touch “Display POI Icon” to dis-
play a particular type of Point of In-
terest on the screen.

A screen with a limited choice of Points
of Interest will be displayed. (To
change the displayed POI, see page
113.)

— Starting route from
ad
jacent road

Map view — —Display POI icons

ROUTE GUIDANCE
79
V573_E

z Selecting POIs to be displayed
Up to 5 categories of icons can be dis-
played on the screen.

Touch the desired Point of Interest
category to display POI location
symbols on the map screen.
By selecting the desired POI category
and then touching “OK”, the selected
POI icons are displayed on the map
screen.
To turn off the Points of Interest icon on
the map screen, touch “Delete”.
“Other POIs”: If the desired Point of
Interest can not be found on the limited
choice screen, touch this button. The
screen then displays the complete POI
listing screen.
“Local POI List”: When searching for
the nearest Point of Interest, touch this
touch screen button. The system will list
the points within 20 miles (32 km). (See
page 80.) Touch “Other POIs” on the “Display
POI Icons” screen.
When a Point of Interest category is se-
lected from either the limited list or the
complete list, the screen will display
symbols of those locations on the map
screen.

Select the desired POI categories.
The selected category icon appears on
the top left of the screen.
By selecting the desired POI category
and then touching
“OK”, the selected
POI icons are displayed on the map
screen.
If the desired POI category is not on the
screen, touch “List All Categories” to
list all POI categories.

ROUTE GUIDANCE
80
V573_E

Select the desired POI categories
from the list.
The selected category icon appears on
the top left of the screen.
By selecting the desired POI category
and then touching “OK”, the selected
POI icons are displayed on the map
screen.
To return to the POI category selection
screen, touch “More”. z
To display the local POI list
Points of Interest that are within 20 miles
(32 km) of the current position will be
listed from among the selected catego-
ries.

1. Touch “Local POI List” on the
“Display POI Icons” screen.

2. Touch the touch screen button of
the desired Point of Interest.
The selected Points of Interest are dis-
played on the map screen.
“On Route”: When the indicator is illu-
minated by touching this touch screen
button, the list of the items searched
along the route is displayed.