Clock VAUXHALL CROSSLAND X 2019 User Guide

Page 197 of 261

Vehicle care195Turn light
1. Rotate the cap (1) anticlockwiseand remove it.
2. Rotate the lower bulb holder anticlockwise to disengage.
Withdraw the bulb holder from the
reflector housing.
3. Press latch and remove the bulb from the bulb holder.
4. Replace the bulb and attach it to the bulb holder.
5. Insert the bulb holder into the reflector housing and rotate
clockwise.
6. Fit the cap and rotate clockwise.
Low beam
1. Rotate the cap (2) anticlockwise and remove it.

Page 198 of 261

196Vehicle care2.Lift the retainer, then pull the plug
connector backwards.
3. Fold down the retainer and remove the bulb from the reflectorhousing.
4. Replace the bulb and push it into the reflector housing by setting
the lug into position.
5. Fold up the retainer and hold in position.
6. Attach the plug connector to the bulb and fix it with the retainer.
7. Fit the cap and rotate clockwise.
Sidelight / Daytime running light
In case of defective LEDs, have them
replaced by a workshop.
LED headlights
Headlights for low and high beam,
sidelights, daytime running lights and turn lights are designed as LEDs and
cannot be changed.
Have lights repaired by a workshop in
case of failure.
Front fog lights
The bulbs are accessible from the
underside of the vehicle.1. Turn the bulb holder anti- clockwise and remove it from the
reflector housing.
2. Disengage the bulb socket from the plug connector by pressing
the retaining lug.
3. Remove and replace the bulb socket with bulb and attach the
plug connector.
4. Insert the bulb socket into the reflector housing by turning
clockwise and engage.

Page 200 of 261

198Vehicle care
Remove the bulb socket from thelight assembly by turning it
anticlockwise.
Remove the turn light bulb from
the socket by pulling it straight out.
Replace bulb.
Attaching the light assembly 1. Attach the bulb carrier to the light assembly and secure with the
three screws.
2. Attach the light assembly to the vehicle body as shown in the
illustration and secure with the
two screws.
Light assembly in the tailgate
Detaching the light assembly
1. Release the cover in the tailgate and remove it.

Page 201 of 261

Vehicle care1992. Unscrew the plastic securing nutby hand.
3. Carefully withdraw the lightassembly from the recesses and
remove.
4. Press latch to release and remove
bulb carrier.
5. Version without LED
Remove and replace the bulb:
Tail light ( 1)
Rear fog light (right side), reverse
light (left side) ( 2)
Version with LED
Only reverse light bulb can be
replaced.
Remove the bulb socket from the
light assembly by turning it
anticlockwise.
Remove the bulb from the socket by pulling it straight out.

Page 202 of 261

200Vehicle careReplace bulb.
Attaching the light assembly 1. Attach bulb carrier to the light assembly.
2. Attach the light assembly to thetailgate.
3. Secure the light assembly with the
plastic securing nut.
4. Attach the cover to the tailgate.
Side turn lights
To replace bulb, remove lamp
housing:
1. Slide lamp to its left side and remove with its right end.
2. Turn bulb holder anticlockwiseand remove from housing.
3. Pull bulb from bulb holder and replace it.

Page 203 of 261

Vehicle care2014. Insert bulb holder and turnclockwise.
5. Insert left end of the lamp, slide to
the left and insert right end.
Number plate light
The number plate light is designed as LEDs and cannot be changed. Incase of defective LEDs, have them
replaced by a workshop.
Interior lights
Have the following bulbs replaced by a workshop:
● courtesy light, reading lights
● load compartment light
● instrument panel illuminationElectrical system
Fuses Data on the replacement fuse must
match the data on the defective fuse.
There are three fuse boxes in the vehicle:
● engine compartment
● instrument panel
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognised by its melted wire.Caution
Do not replace the fuse until the
cause of the fault has been
remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
Fuse extractor
A fuse extractor may be located in the
fuse box in the engine compartment.

Page 257 of 261

255Clock............................................. 76
Control indicators.......................... 87
Control of the vehicle .................131
Controls ........................................ 72
Convex shape .............................. 33
Coolant and antifreeze ...............230
Cruise control ...................... 93, 150
Cupholders .................................. 62
Curtain airbag system .................. 54
D Danger, Warnings and Cautions ...4
Daytime running lights ...............111
Declaration of conformity ............244
DEF ............................................ 140
Deflation detection system ...........92
Diesel exhaust fluid ....................140
Diesel fuel system bleeding .......192
Door open .................................... 93
Doors ............................................ 29
Driver alert .................................. 175
Driver assistance systems ..........150
Driver Information Centre .............94
Driving characteristics and towing tips .............................. 182
Driving hints ................................ 131
E Electric adjustment ......................33
Electrical system......................... 201
Electronic climate control system 122Electronic driving programmes ..144
Electronic key system ...................22
Electronic Stability Control and Traction Control system ....91, 148
Electronic Stability Control and Traction Control system off .......91
End-of-life vehicle recovery .......187
Engine compartment fuse box ...202
Engine coolant ........................... 190
Engine coolant temperature ........91
Engine coolant temperature gauge ....................................... 85
Engine data ............................... 237
Engine exhaust .......................... 139
Engine identification ...................233
Engine oil ................... 189, 230, 234
Engine oil level monitor ................86
Engine oil pressure ......................92
Entry lighting .............................. 116
Event data recorders ..................250
Exhaust filter ......................... 91, 139
Exit lighting ................................ 116
Exterior care .............................. 222
Exterior light ................................. 92
Exterior lighting ....................12, 109
Exterior mirrors ............................. 33
F Fault ........................................... 145
First aid ......................................... 68First aid kit ................................... 68
Fixed air vents ........................... 128
Folding mirrors ............................. 34
Forward collision alert................. 155
Front airbag system .....................53
Front fog lights .............93, 113, 196
Front pedestrian protection ........159
Front seats.................................... 42
Fuel............................................. 176
Fuel for diesel engines ..............176
Fuel for liquid gas operation .......178
Fuel for petrol engines ...............176
Fuel gauge ................................... 84 Fuel selector ................................ 84
Fuses ......................................... 201
G
Gauges ......................................... 83
Gear shifting ................................. 90
General information ...................181
Glass panel .................................. 39
Glovebox ..................................... 62
H Halogen headlights ....................194
Hand brake ................................. 147
Hazard warning flashers ............112
Headlight flash ........................... 110
Headlight range adjustment ......111
Headlights................................... 109
Headlights when driving abroad 111

Page:   < prev 1-10 11-20