change time AUDI A3 SEDAN 2018 User Guide

LL co ..... N
" N ..... 0 N > co
detected and class ified as crit ica l. T he disp lay in
the mirror turns on, but is dim .
The display rema ins dim in the info rmat ion s tage
so that your view toward the front is not distur­
bed .
Warning stage
If the d isplay in a m irror blinks br ightly when you
activa te a turn signal, side assist is
warning you
about detected vehicles tha t it has classified as
cr it ic a l. If this happens, check traffic by g lan cing
in th e exterior m irrors and over your shoulder
c::> .&. in General information on page 138 .
Applies to: vehicles with Audi active lane assist
The display in the m irror can also b lin k if you
have not activated a t urn signa l: if yo u are ap ­
proaching a detected lane marker line and it ap­
pears yo u wi ll be leav ing the lane , sid e assist w ill
warn you about detected vehicles that it has clas­
sified as critical.
@ Tips
You can ad just the brightness on of the dis­
play on the rearview mirror
c::> page 138 .
General information
Applies to: veh icles with Audi side assist
F ig . 140 Drivi ng situat ions
A ssi st a nce systems
Fig. 141 Rea r of the ve hicle: pos it io n of t he se nso rs
Side assist funct ions at speeds above approxi­
mately 9 mph (15 km/h).
@ App roaching vehicles
In certain cases, a vehicle w ill be classified as
critical for a lane change even if it is still some ­
what far away . The faster a vehicle approaches,
the sooner the display in the exterior m irro r will
tu rn on.
@ Vehicles traveling with you
Vehicles traveling with you are indicated in the
exter ior mirror if they a re classified as cr it ical for
a la ne cha nge . A ll vehicles detected by side assist
are ind icated by the time they ente r you r "blind
spot" , at the la tes t.
@ Vehicles you are passing
If you s low ly pass a veh icle that s ide ass ist has
detected (the difference in speed between the
vehicle and you r vehicle is less than app roximate­
ly 9 mph ( 15 km/h)) , the disp lay in the exter ior
mir ror tur ns on as soon as the vehicle en te rs yo ur
blind spot .
The display w ill not tur n on if you quickly pass a
vehicle that side ass ist has detected (the diffe r­
ence in speed is grea ter than approximate ly 9
mph ( 15 km/h)) .
Functional limitations
The radar sensors are des igned to detect the left
and right adjacent lanes when the road lanes are
t h e norma l width. In some situa tions, the display
in the exte rior m irror may turn o n even though
t h ere is no veh icle located in the area that is criti-
ca l for a lane change. For example :
..,.
137

LL co .... N
" N .... 0 N > co
Parking aid
General information
Ap plies to: vehicles with pa rk in g system plus/rearview cam­
era
Depending on your vehicle's equipment, various
parking aids will help you when parking and ma­
neuvering.
The
parking system plus assists you when park­
in g by aud ibly and visua lly indicating objects de­
tected
in front of and behind the veh icle
¢ page 143.
The rearview camera shows the area beh ind the
veh icle in the Infotainment system d isplay. The
l ines in the rearview camera image help you to
park or
maneuver ¢ page 145.
& WARNING
-Always look for traffic and check the area
around your vehicle by looking at it directly
as well. The parking system cannot replace
the driver's attent ion. The driver is always
responsible when enter ing or leaving a park­
ing space and during similar maneuvers.
-Please note that some surfaces, such as
clothing, are not detected by the system.
-Sensors and cameras have blind spots in
which people and objects cannot be detect­
ed . Be especially cautious of small children
and animals.
- Always pay attention to the area around the
vehicle -using the rearview mirror, too .
-The sensors can be displaced by impacts or
damage to the radiator gr ille, bumper,
wheel housing and the underbody . The park ­
ing system may be impa ired as a result.
Have an authorized Audi dealer or author­
ized Audi Serv ice Facility check their func­
tion.
(D Note
-Some objects are not detected or displayed by the system under certain circumstances:
-objects such as barrier chains, trailer draw
bars, vert ical poles or fences
-objects above the sensors such as wall ex ­
tensions
Parking aid
-objects with certain s urfaces or structures
such as chain link fences or powder snow
-If you continue driving closer to a low ob­
ject, it may disappear from the sensor
range . Note that you will no longer be
warned about th is obstacle.
-Keep enough distance from the curb to re­
duce the risk of damage to th e rims.
(I} Tips
-The system may provide a warning even
though there are no obstacles in the cover­
age area in some situations, such as:
-certa in road surfaces or when there is tall
grass
- external ultrasonic sources such as from clean ing vehicles
-in heavy rain, snow, or thick vehicle ex­
haust
-We recommend that you practice parking in
a traff ic -free location or parking lot to be ­
come fam iliar with the system . When doing
this , there shou ld be good light and weath­
er conditions .
-You can change the volume and pitch of the
signa ls as well as the display ¢
page 147.
-What appears in the infotainment display is
somewhat time-delayed .
-The sensors must be kept clean and free of
snow and ice for the parking aid to operate .
Parking system plus
Description
Applies to : vehicles wit h parking system plus
Parking system plus provides audio and visual
s ignals when parking .
Fig. 14S Illust ratio n:
143

Multifunction steering wheel
Street view with route guidance started
Applies to: vehicles with navigation system and analog instru­
ment cluster
F ig . 170 Example: lane change in the instrum en t cluster
F ig. 171 Example: turning maneuver in the instrumen t
duster
Requi rement: a destination must be ente red
Q page 201, route guidance must be started and
the navigation tab mus t be disp layed.
Depending on vehicle equipment, the following
i n formation may be shown in the dr iver informa­
tion system.
(D Distance to the next maneuver
@ Distance to the destinat ion or stopover
® Calculated arrival time
@ Name of the current expressway, highway or
street.
If the O symbo l is displayed in front
of the street name, you should tu rn onto the
street shown.
® Direction arrow for the upcoming maneuver
® Lane recommendat ion
0 A bar graph appears when a direction arrow
is displayed . The fewer bars are shown, the
shorter the distance is until the turn.
The following functions are also available when
route guidance is active:
168
-Repeating the last navigation prompt: press
the
QJ button.
- Changing the voice guidance volume: turn the
right thumbwheel up or down during voice
guidance.
A WARNING
The route calculated by the navigation system
is a recommendation for reaching your desti­
nation. Obey traffic lights, stopping restric­
tions, one-way streets, lane change restric­
tions, etc.
@ Tips
-Also see the chapter Q page 8, Controls at a
glance.
-An exclamation point "!" in front of the
street name ind icates that the information
about this street or this sect ion of the route
is not complete in the navigat ion data con­
tained in the MMI. Obey traffic laws in one­
way streets and pedestrian zones.

Voice recognition system
Function Say:
Starting route guidance with an ad-Navigate/ Navigate to private address / Navigate to business
dress card open address
Ent ering a new destination/stop- Enter address
> enter the desired address when prompted>
over when ro ut e gu idan ce is active confirm the new destination/stopover if prompted
Starting route guidance after enter- Start route guidance
ing a destination
Canceling current route guidance Cancel route guidance
Calculating alternat ive routes Calculate alternative routes
Entering a point of interest by se -Point of interest
> Change search area > category or subcote-
lecting a search area with guidance gory when prompted, for example
"restaurant"
from the system
Destination input categor ies Audi Service / Train station /Airport / Hotel / Hospital / Park-
ing / Rest area /Restaurant / Gas station
etc.
Search areas for entering points of Nearby/ Along the route / Near destination / Near stopover /
interest In new city/ In a new state/country
Entering an online destination * Online destination
(XV), for example "Online destination
"Lakeview Hotel""
Co rrect ing data input No I meant (XV)
Clos ing the full-screen command
Close
list
Requirement: you must be in the Navigation or
Map menu. You can say the fo llowing commands
for more settings in Navigation:
Function Say:
Genera l map options Map/ Day map / Night map / Automatically change map color
Map type 2D heading up map/ 2D north up map / 3D map / Destination
map / Overview map / Standard map* / Google Earth
map* albl
Showing the route list Route list
Showing the remaining distance/ Destination information
time when route guidance is active
Speed l imit prompt How fast can I drive here?
Setting voice guidance for active Voice guidance on
I Voice guidance off I Voice guidance short-
route guidance ened
I Voice guidance complete I Voice guidance traffic
Blocking a certain section on the Block route for (XV) meters/kilometers/yards/miles / Block
route next route / Avoid next section of route
a) P rov ider a t tim e of prin ting.
bl AUDI AG p rovides access to services fro m thir d party prov iders. Perm anent ava ilab ility cannot be guaranteed , because t hat
depends on the th ird party p rov ide r.
(D Tips
- Destinations may have to be spelled when
entered, depending on which region you are
174
in and wh ich menu language you have se­
lected.

Tele phone
button > Settings > left control button > MMI
s etting s
> Con nectio n man age r<::> page 244.
~ Se lect and confirm the desired ce ll phone from
the list of disp layed Bluetooth devices .
~ The MMI generates a PIN for the connect ion
setup
<::> fig . 173 .
~ Select and confirm Yes .
~ Enter the P IN for connecting on your ce ll
phone .
Or: whe n the PIN is d isplayed o n your
ce ll phone, co nfirm the PIN on yo ur cell phone
and in t he MMI. The time a llowed for entering
the P IN is limited to approximately 30 seconds.
~ Pay attention to any additiona l system prompts
displayed on your cell phone, for example if the
system should connect au tomatically in the fu­
ture . Depending on the cell phone, you may
have to confirm downloading the directory sep­
arately .
After connect ing succ essfully
After connecting successfully, information about
the connected profiles will appear. You can a lso
change the profiles la ter. Select:
! M ENUI button>
Settings > left control button > MMI settings >
Connection manager <::> page 244.
In addition, the cell phone contacts are automat­
ically loaded in the MMI directory. Th is process
can take several minutes, depend ing on the num ­
ber of contacts .
You can a lso make your connected cell phone the
default phone by select ing
S et as def ault tel e­
phone
i n the Conne ction m anager <::> page 246 .
@ Note
Always follow the information found in c::>il]) in
Wi-Fi hotspot on page 195.
(D Tips
- Making phone calls throug h the MMI is only
possib le using the
Handsfree Bluetooth pro­
file.
- You can apply additional settings to con­
nected mobile devices using the
Connection
manag er <::>
page 244 .
-You can also search for the MMI in your cell
phone us ing the Bluetooth device search.
17 8
-You on ly have to pair your device one time .
B luetooth devices that are already paired
automatically connect to the M MI when the
Bluetooth funct ion is switched on, they are
within range and the ignition is sw itched on.
The last connected cell phone is given first pr iority.
- Authoriz ing the MMI connect ion in your cell
phone w ill make automatic connection pos­
sible .
- Pay attention to any system prompts dis­
played on you r cell phone, for example if
the system should connect automatically in
the f uture. Depend ing o n the cell phone,
yo u may also need to download the di recto ­
ry and confirm a ccess to your text messages
separate ly .
- Whe n leav ing the veh icle, the Bluetooth
connect ion to the cell p hone will au tomati ­
cally disconnect. Depending on your cell
phone, phone calls in progress may be auto ­
matically redirected from the MMI to your
cell phone and you can continue the ca ll on
your phone.
- You can obtain more information from your cell phone service provider or from your cel l
phone user guide. For i nformation on us ing
the telephone, v is it www .aud iusa .com/
bluetooth or contact an a uthorized Audi
dea ler or author ized Audi Se rvice Facili ty.
- Applies to: vehicles without secondary
phone: Several cell phones can be paired to
the MMI, bu t only one cell p hone can be a c­
t ively connec ted to the MM I.
- Applies to: vehicles without secondary
phone: If a Bluetoo th device is a lready con ­
nected to the MMI, i t will be d isconnected
w hen anot her device connects to the MM I.

LL co .... N
" N .... 0 N > co
• Enter your myAudi user data. Or: enter your
e ight-d igit myAudi PIN .
• Confirm your entry with OK.
Then you can open your persona l settings from
your myAudi account in your vehicle .
(D Tips
You can receive your my Aud i PIN if you have
set up a myAudi account. For additional infor ­
mat ion, see www.audiusa .com/myaudi.
Opening Audi connect
(Infotainment)
A ppl ies to veh icles w ith A ud i con nect (Infotainment)
_________ A _o _d _, _c _o _" _" _°"' _ t·_A
_ ,1_ ,_ •_ r_, _ ,_ •_ •_____ _ ,
:· . l : ~
I;;~ .,_lJre,; --· (. '
44 ,6 °F .:;·, .44 6 F
J ;9 O nline dest inations
.,. ,', ': . 37 r-·~·· -1
~ Online traffic information =
Fig. 181 Aud i co nn ect (Infot ainm ent) home p age
• Select : the I M ENU ! button> Audi connect .
• If necessary, confirm the note displayed with
Accept .
A list of all of the available Audi connect Infotain­
ment services is shown in the Infotainment sys­
tem display
r::;, fig. 181 .
You can also filter the Audi connect Infotainment
services by category:
• Select : I MENU I button > Audi connect> left
control button > for example,
Navigation for
the Audi connect Infotainment services in the
navigation menu
r::;, page 193 .
Audi connect
Infotainment services
Basic functions
A pplies to vehicles w ith A ud i con nect (Infota inme nt)
If available, functions specific to certa in services
are in the selection menu of that particular Aud i
l) Not avail able in all lang uag es .
Audi connect (Infotainment)
connect Infotainment service r::;, page 156. The
basic functions are in the corresponding options
menu:
• Select: ! MENU I button> Audi connect> desired
Audi connect Infotainment service>
right con­
trol button .
Depending on the Audi connect Infotainment
service selected, the following basic functions are
available:
Save as preview*
You can also see a preview of the selected Audi
connect Infotainment services on the Aud i con­
nect Infotainment home page
(Dr=;, page 191,
fig . 181.
Show on map
You can show selected contents on the map and
use them for route guidance.
Login
Seer::;, page 190, Logging in to myAudi in the vehi­
cle .
Read out1>
You can allow the MMI to read out the selected
contents .
Call*
If a phone number was assigned to an entry , you
can call the number, for example to reserve tick­
ets.
Start route guidance
If a c ity was added to an entry, such as for City
Events ,
you can use it as a navigation destina­
tion. Route gu idance sta rts immed iate ly .
Change search area
The set search area can be changed at any time .
Additional information on search areas can be
found under
r::;, page 204.
191

u. 00 .-< N l'­ N .-< 0 N > 00
The following categories can be selected in the
Twitter menu:
-My tw eets: News Feed and the Tweets you have
posted are listed.
- Home: the Tweets for everyone you follow are
displayed.
- Trends : topics on Twitte r that are cur rently
popular w ithin a country .
D ifferent functions are available depending on
the Twitter category you have selected:
- New tweet : you can post a new tweet using
pre-made templates or using myAudi tem­
plates that you have created yourself .
-Refresh : the selected Tw itter function is re­
freshed .
-Favorite : mark a Tweet as favorite to show you
liked it .
-Retweet: you can quote a Tweet to share it with
others.
(D Tips
- Other settings such as account, language,
Tweet security and location settings
cannot
be changed in the MMI. These changes must
be made on the Twitter webs ite.
- You can only connect
one Twitter account
with your myAudi account.
- Audi connect (Infotainment) makes it possi­ ble to access Tw itter. Permanent ava ilability
cannot be guaranteed, because that de­ pends on Twitter.
Travel (travel guide)
Applies to: ve hicles with Trave l (travel guide)
You can use the Audi MMI connect opp to store
points of interest on your mobile device (such as a smartphone) and then use them for route
guidance in the
MMI.
Requirement:
The
Audi MMI connect app must be insta lled and
open on your mobile device.
Audi connect (Infotainment)
You must be logged into your myAudi account in
the
Audi MMI connect app and you must have se­
l ected your vehicle.
T he Wi-Fi function on your mobile device and on
the MMI must be switched on.
T he M MI must be connected to the network.
.. Press: !MENU ! button> Audi connect> left con-
trol button >
Information category> Travel.
After opening the trave l guide, trave l tips in your
area w ill be displayed including current ratings as
well as the corresponding category .
.. Press the left control button to change the cat­
egory (such as bars nearby).
,&. WARNING
- It is only safe to use tablets, laptops, mo­
bile devices and other similar devices when
the vehicle is sta tionary because, like all
loose objects, they co uld be thrown around
the inside of the ve hicle in a crash and cause
serious inj uries. Store these types of devices
securely while driving.
- Do not use any wireless devices on the front
seats within range of the airbags while dr iv­
ing. Also read the warnings in the chapter
¢ page 2 73, Front airbags .
(D Tips
-Units of measurement, language settings
and time are shown in the Infotainment sys­
tem display based on how they were set in
the MMI system sett ings
¢ page 243.
Audi connect (Infotainment) in navigation
App lies to : vehicles wit h a navigat ion syste m and Audi co n­
nect (Infota inment)
.. Select: IMENU! button> Audi connect> left
control button>
Navigation.
-
T he following Audi connect Infotainment services
are currently available:
..,.
193

LL co ..... N
" N ..... 0 N > co
(D Tips
Always read the chapter¢ page 196, Audi
connect (Infotainment) general information .
Accessing destinations from myAudi
account
Applies to: veh icles with a navigation system and Audi con­
nect (Infotainment)
Import individual destinations from your myAudi
account into the
MMI.
Req uirement:
The requ iremen ts for Aud i connect (Infotain­
ment) must be met
¢ page 190 .
You must have a registered myAudi account at
www .audiusa .com/myaudi . You must have
ave ­
hicle assigned to your myAudi account and yo u
must have sto red one or mo re destinations .
... Press the I NAV/MAPI button repeatedly until
the
Ent er destination menu is displayed
¢ page 201, fig . 182 .
... Select: left cont rol button > myAudi contacts .
... If necessary, enter your myAudi user data o r
yo ur myAud i PIN¢
page 190 . The contacts
stored in myAudi are d isp layed.
- Se lect and confir m a conta ct.
- Se lect and confirm a priva te or b usiness desti-
nation .
- Select and co nfirm
Start route guidance .
(D Tips
-You only need to enter the myAud i user data
one time.
- You can receive your myA udi PIN if you have
set up a myAudi account.
- Fo r additional informat ion, visit
www.audiusa.com .
Entering a destination using geo
coordinates
App lies to: vehicles with navigation system
... Press the I N AV/MAPI but ton repeated ly un til
t h e
Enter de stination menu is dis played
¢page 201 , fig . 182.
Na viga tion
... Sele ct: left control button > Geographi cal coor­
dinates .
-Sele ct Latitude /Longitude .
-Press the cont ro l knob to set the individ ual va l-
ue s.
- Tur n the control knob to the left/ right to
change the selected va lue.
- Select and confirm
Start route guidance .
Adding a stopover
Applies to: vehicles with navigation system
You can enter an additional destination when
route guidance is active .
Fig. 184 Example: act ive route gu ida nce w it h stopover
Requireme nt: route guidance must already be ac ­
t ive.
... Press the ! NAV/MAP I button repeatedly unti l
the
Enter destination menu is displayed
¢ page 201 , fig.182 .
Entering a destination as a stopove r
-Enter a destination in the input line
¢ page 201 .
-Select an d confirm a destinat ion from the re -
sults list .
- Select and confirm
Add as stopover.
Deleting a stopover
- Push the contro l knob up. Fre e tex t sea rc h and
ac tive route g uidance are disp laye d.
Or : turn
t he co ntro l knob to t he left un til the act ive
route guid ance is shown.
- Sele ct and confirm
Delete stopover @
¢ fig. 184 .
-The stopove r is deleted .
205

u. 00 ... N l'­ N ... 0 N > 00
Audi smartphone interface
Setup
A ppl ies to : ve hicles w ith Audi smartpho ne inte rfa ce
You con conn ect your smortphone to the MM I us­
ing the Audi smortphon e int erfac e. Certain con­
t e n t on you r sm ortphone is ado pted to th e Info­
tainme nt system d is p lay while driving and con
be operated through the
MMI control panel .
Requirement
The vehicle must be stat ionary and the ignition
must be switched on .
iPhone generation 5 or h igher w ith Lightning
connector and iOS 7 .1.2 operating system or h igher.
O r:
Smartphone with Android Auto app and Android
5 .0 Loll ipop operating system or higher.
.,. Connec t your sma rtphone to the Audi music in ­
terface ¢ page 230 using a USB adapte r
¢ page 229, fig. 206.
.. Select and confirm A ctivate Apple CarPlay or
Acti vate And roid Auto now .
.. Follow the system instruct ions.
.. Pay attention to any additiona l system prompts
on your smartphone if applicable .
If yo u chose not to use Apple CarP lay or Android
Auto when connecting your smartphone for the
first time, you can start the Audi smartphone in ­
terface later on using the
Connection manager.
.,. Se lect : I MENU I button > Audi smartphone in-
terfa ce
> Change to connection manager .
.. Connect your sma rtphone to the A udi music in ­
terface using a USB
ad apter ¢ page 229,
fig. 206.
.. Select and confirm Audi smartphone in t he
Connection manager ¢ page 244. You can se­
l ect your smartphone in the list of devices that
are already
paired¢ page 245.
.,. Follow the system instruct ions .
@ Note
Always follow the i nformat ion found in¢ @) in
Wi-Fi hotspot on page 195 .
Audi smartph one interfac e
(D Tips
-The functions that can be used depen d on
the fo llow ing factors, among others:
- the brand of your smartphone
- the vers io n of the ope rating system in
your smartphone
- the software ve rsion of the app used
- the USB adapter cab le and correct connec-
tion
- your cell phone se rvice provide r
- the customized settings on yo ur sma rt -
phone
- One of the factors above o r a com bina tion
of any of them could cause your sma rtphone
to be incompatib le wit h the Audi smart­
phone inter face. Compatibility cannot be
guaranteed for all types of smartp hones.
For more informat io n and assistance, refer
t o the user guide and the man ufactu rer of
yo ur sma rtphone .
- If the connected smartphone has voice con­
tr ol, you can ope rate yo ur smartp hon e usi ng
the ex ter nal voic e recognition system
¢page 175.
- Th e menu language show n in t he MMI is
based on t he sett ings in you r smartp ho ne .
- Th e time d is p layed in the M MI is based o n
the settings in yo ur sma rtphone .
- Severa l M MI functions a re not avai lab le
when Apple Car Play o r Andro id A uto is ac­
t ive.
- Yo u ca nnot co nnect any mob ile dev ices via
B lu etooth whe n an App le CarPlay connec­
tion is a ctive .
- Whe n the App le CarPlay connection is ac­
t ive,
Tag this song for iTunes* is not av aila­
ble
¢p age 219 .
Operating
A pp lies to: vehicles wit h Audi sm artph one interface
Opening a menu
Apple CarPlay :
you can go back to the Apple Ca r­
Play main me nu regardless of the se lected me nu
i tem by p ressing and holdi ng the
I BACKI button .
Android Auto : to go back to the Andro id Auto
menu bar , push the control knob down .
241

u. 00 .-< N l'­ N .-< 0 N > 00
System settings
Setting the date and
time
You can set the clock time manually or using the
CPS* .
.. Select : IMENUI button> Settings> left control
button >
MMI settings > Date & time.
.. Or : select : IMENUI button> Vehicle> left con-
trol button >
Vehicle settings > Date & time .
Automatic setting
When this function is switched on g, the time
and date are automatically set.
Time
Requirement: the Automatic setting must be
switched
off .
Press the control knob. You can set the Time
manually by turning and pressing the control
knob.
Date
Requirement: the Automatic setting must be
switched
off.
Press the control knob . You can set the Date
manually by turning and press ing the control
knob.
Time zone
When selecting the appropriate time zone, a
sampling of countries in this zone will be listed .
Automatic time zone*
When this function is switched on g, the time
will automatically adjust to the corresponding
time zone.
Automatic daylight saving time*
When this function is switched on g, the time
will automatically switch to daylight saving time .
Time format
If you select 24h, the clock will display, for ex­
ample,
13:00 . If you select AM/PM , the clock
will disp lay, for examp le,
1:00 PM .
System settings
Date format
If you select DD.MM.YYYY , the date display will
show, for example ,
31.08.2017. If you select
MM/DD/YYYY , the date display will show, for ex­
amp le,
08/31/2017. If you select YYYY-MM­
DD ,
the date display will show, for example,
2017-08-31 .
MMI settings
.. Select: !MENU I button> Settings> left control
button >
MMI settings .
Language
You can change the display language as well as
the language for the voice guidance* and voice
recognition system*.
T he number of languages available depends on
the market.
Measurement units
The following measurement units can be set de­
pend ing on availability:
Speed , Distance , Tem­
perature , Fuel consumption , Volume , Pressure.
Tool tips
When this funct ion is switched on g, your MMI
shows you tips for input . The frequency of how
often it displays decreases with time.
Speech dialog system
Applies to : vehicles wit h voice recog nitio n system
Depend ing on veh icle equipment, the following
funct ions may be ava ilable:
Command display : when this function is switch ­
ed on
g, the MMI will show you the possible
commands for voice input in the respective
menu.
Short dialog : when this function is switched on
g, a shorter form of the prompts is used .
Command during voice output*: thi s function is
switched on at the factory . W hen this function is
switched on
g, you can say new commands dur-
ing announcements. You do not need to wait for
the signal tone (beep) dur ing an announcement.
When the funct ion is swi tched off
0, you need to Iii>
243