ECU AUDI A4 1996 B5 / 1.G 01A Transmission Front Differential Assembly Workshop Manual

39-26


11 -
Adjustment shim S1
Note thicknessList of adjustments Page 39
-37
12 -
Differential cover*
13 -
Large differential bevel gear
Installing Fig. 11
14 -
Differential bevel gear shaft
Drive out using drift, after removing roll pin
15 -
Roll pin For securing differential bevel gear shaftVersion with annular groove, removing and
installing Fig. 12

Version without annular groove, drive out
using drift
16 -
Small differential bevel gears Installing Fig. 11
17 -
Thrust washer assembly
Coat with transmission oil when installing
Pa
ge 7 of 14 Front final drive differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.5

39-32


WARNING!
Wear protective gloves. Fig. 10 Installing ring gear
- When installing ring gear, guide with centering pins -A- (local
manufacture).
-
Heat ring gear to approx. 100 C (212 F) and install.- Allow ring gear to cool off slightly before inserting bolts.
- Tighten to specified torque.

Fig. 11 Installing differential bevel gears
- Lubricate one-piece thrust washer with transmission oil and install.
- Install large differential bevel gears.
-
Insert small differential bevel gears at 180 from their final position,
and rotate into place (arrow). - Drive small differential bevel gear shaft into final position and secure.
Pa
ge 13 of 14 Front final drive differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.5