AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual A4 1996 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/932/w960_932-0.png AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual
Trending: ECU, check engine

Page 1 of 12

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual 13-67
 
  
Crankshaft, removing and 
installing Note:  
When working on the engine, it should be secured 
to the engine stand using the engine bracket VW 
540  Page 10
-27
 . 
1 - 
Bearing shell 
For

Page 2 of 12

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual 13-68
 
  
3 - 
Bearing shell 
For bearing cap without oil grooveDo not interchange used bearing shells 
(mark). The crankshaft bearing plates in the 
bearing covers are supplied as spare part 
with t

Page 3 of 12

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual 13-69
 
  
6 - 
Bearing cap 
Bearing cap 1: Pulley endBearing cap 3 with recesses for thrust 
washers Bearing shell retaining lugs (cylinder 
block/bearing cap) must be on the same 
side 
7 - 
10 Nm +

Page 4 of 12

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual 13-70
 
  
9 - 
Sensor wheel 
For engine speed sensor -G28-Can only be installed in one position. Holes 
are offset Always replace sensor wheel if securing 
bolts have been loosened. Removing and inst

Page 5 of 12

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual 13-71
 
    
Note: 
Tightening torque  1) Replace bolts  2) 90 corresponds to a quarter turn   Fig. 1  Removing and installing sensor wheelAlways replace sensor wheel -2- if securing bolts -1- have be

Page 6 of 12

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual 13-72
 
    
The bearing plates with the correct thickness are allocated to the cylinder 
block at the factory. Colored dots are used to mark the thickness of the 
bearing plates.  
Note:  
Arrow poin

Page 7 of 12

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual 13-73
      
Crankshaft needle bearing, removing 
and installing 
 
     
Special tools and equipment  
    
Special tool VW 207 C 
    
Special tool Kukko 21/1 (Item 1) and Kukko 22/1 (Item 4)Depth g

Page 8 of 12

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual 13-74
      
Note:  
     
A needle bearing must be installed in the 
crankshaft on vehicles with a manual 
transmission. Install needle bearing if 
necessary. 
     The needle bearing must not be ins

Page 9 of 12

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual 13-75
      
Installing  
    
-  Drive in using 207c or centralizing pin 3176.
 
Lettering on needle bearing must be visible when installed
    
Installation depth of needle bearing  
Distance a = 1.

Page 10 of 12

AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual 13-76
      
Crankshaft dimensions
 
      (in mm)  
     
Honing 
dimension  
Crankshaft 
bearing  
main journal 
diameter  
Conrod 
journal  
  
main journal 
diameter  
      -0.017         -0.022
Page:   1-10 11-20 next >
Trending: check engine, ECU