AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual A4 1997 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/982/w960_982-0.png AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual
Trending: cruise control, spark plugs, check oil, oil temperature, oil pressure, heater

Page 1 of 35

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual 15-7
 
  
Lock carrier, removing for 
service 
1 - 
Bolt (8 x 45) 
45 Nm (33 in lb)
2 - 
Bolt (8 x 45) 45 Nm (33 in lb)
3 - 
Bolt (6 x 20) 10 Nm (7 ft lb)
4 - 
Bolt (6 x 20) 10 Nm (7 ft lb)
5 - 
Hole

Page 2 of 35

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual 15-8
 
  
Removing  
-  Unbolt air guide at front end, between front end 
and air cleaner, and remove. 
-  Remove mounting bolt -2- on right-hand side and 
thread in VAG 3369. 
-  Thread VAG 3369 into

Page 3 of 35

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual 15-9
      
Cylinder head cover, installing
 
     
CAUTION! 
     
Part numbers are listed for reference only. 
Always check with your Parts department for 
the latest information. 
     The inside a

Page 4 of 35

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual 15-10
      
Camshaft oil seals, replacing
 
     
Front  
     
-  Remove toothed belt   page 13-11
 .
     
-  Remove cylinder head cover.
     
-  Remove rear toothed-belt guard.
    
Note:  
Do no

Page 5 of 35

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual 15-11
      
Right rear  
    
Left rear   -  Remove bolts, spacer plate and attachments.
- Remove cap.
- Replace O-ring.
-  Remove Camshaft Position (CMP) sensor housing.
-  Remove bolt from CMP sens

Page 6 of 35

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual 15-12
 
    
Note:  
Do not oil sealing lip or outer edge of seal before pressing in. 
Tightening torque:  
CMP sensor plate: 20 Nm (15 ft lb)  -  Use seal extractor 3240 or 2085 and bolt 2085/1 to re

Page 7 of 35

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual 15-13
      
Cylinder head, removing and installing
 
     
Engine installed 
      This removal procedure refers to the left cylinder 
head  
     
Removing  
     
-  Remove ribbed belt   page 13
-9

Page 8 of 35

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual -  Disconnect all harness connectors on fuel injectors.
Pa
ge 8 of 35 Lock carrier, removin
g for service
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.

Page 9 of 35

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual 15-14
      
-  Disconnect positive crankcase ventilation 
connections on left and right cylinder head 
covers. 
     
-  Disconnect fuel supply and return lines.
     
-  Unclip cover on intake air h

Page 10 of 35

AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual -  Disconnect harness connector at oil pressure sensor and at oil 
pressure switch. 
-  Disconnect harness connector at the Camshaft Position (CMP) sensor 
housing. 
-  Disconnect vacuum pipe at intak
Page:   1-10 11-20 21-30 31-40 40 next >
Trending: check oil, heater, cruise control, spark plugs, oil temperature, oil pressure