wheel AUDI A4 1997 B5 / 1.G Rear Bumper Workshop Manual

63-13


Rear bumper, removing and installing (VIN
8D XA 200 001 )

1 -
Bumper
To remove, remove combination bolts -6-.For S4 models, an additional bolt must be
installed at the wheelhousing liner Fig. 1 . Unclip bumper from bracket -4- and
remove toward rear.
2 -
Spoiler Removing and installing page 63
-10
.
3 -
Metal bolt
1.5 Nm.
4 -
Bracket for rear bumper The bracket has two parts. The front half
can be shifted to adjust the length.
Pa
ge 3 of 5 Rear bum
per
(Sedan
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.3

63-15


Fig. 1 Additional mount for S4
- Remove bolt -2 from wheelhousing liner before disassembling bumper
-1-.
- Clip -4- is clipped onto wheelhousing liner -3-.

Fig. 2 Removing impact absorber from bumper
- Remove bolts (arrows) and take impact absorber -1- out of bumper -2-.
- When installing, tighten to 23 Nm.
Pa
ge 5 of 5 Rear bum
per
(Sedan
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.3