air condition AUDI A8 1995 D2 / 1.G AEB Engine Throttle Valve Control Module And Checking
[x] Cancel search | Manufacturer: AUDI, Model Year: 1995, Model line: A8, Model: AUDI A8 1995 D2 / 1.GPages: 38, PDF Size: 0.12 MB
Page 7 of 38
24-103
Closed Throttle Position (CTP) switch,
checking
Note:
The Closed Throttle Position (CTP) switch -F60-
is inside the throttle valve control module -J338-.
Test conditions
Throttle valve in closed throttle position; if
necessary adjust accelerator pedal cable
Repair Manual, Fuel Supply System, Repair
Group 20
Cruise control adjustment OK
Power supply for throttle valve control
module OK; checking Page 24
-101
Checking
- Connect VAG 1551 or VAG 1552 scan tool and
press buttons -0- and -1- to insert "Engine
Electronics" address word 01 (with engine
running at idle) Page 01
-7 .
Pa
ge 7 of 38 Throttle valve control module, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.2
Page 9 of 38
24-104
- Press buttons -0-, -0- and -5- to input display
group number 5, and press -Q- button to confirm
input. Read Measuring Value Block 5 1 2 3 4
Indicated on display (1-4 = display fields)
- Check Closed Throttle Position (CTP) switch (display field 4):
Display fields
1 2 3 4
Display group 5: Engine electronics
Display xxx RPM xx.xx ms xxx km/h Idle
Part throt
Full throt
Decel
Enrich
Indicates Engine speed
(in 40 RPM steps) Engine Load Vehicle speed Operational condition
Range 0-6800 RPM 0.00-8.50 ms --- ---
Specified value 760-960 RPM 0.50-1.50 ms 0 km/h Throttle closed: "Idle"
Throttle slightly open: "Part throt"
Pa
ge 9 of 38 Throttle valve control module, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.2
Page 14 of 38
24-107
Throttle drive and angle sensor for
throttle drive, checking
Note:
Throttle drive -G186- and angle sensor -1- for
throttle drive -G187- are located in the throttle
valve control module -J338-.
Test conditions
Throttle valve in closed throttle position; if
necessary adjust accelerator pedal cable
Repair Manual, Fuel Supply System, Repair
Group 20
Cruise control adjustment OK
Power supply for throttle valve control
module OK; checking Page 24
-101
Engine coolant temperature at least 80 C
(176 F)
Automatic transmission selector lever in "P"
or "N"
Pa
ge 14 of 38 Throttle valve control module, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.2
Page 16 of 38
24-109
- Compare display with specified values for idle
air control (display fields 1-4):
Display fields
1 2 3 4
Display group 55: Idle control
Display xxx RPM x.xx g/s x.xx g/s xxxx
Indicates Engine speed RPM
(in steps of 10 RPM) Regulating value-idle mass
air flow (idle air control) Learning value-idle
mass air flow Operating
conditions
Range 0-2550 RPM -2.80 to 4.17 g/s -1.94 to 2.22 g/s ---
Specified
value 820-900 RPM -1.11 to 1.11 g/s -1.11 to 1.11 g/s 0000
If engine speed is NOT OK
Page 24
-111
, Continuation
If display is NOT OK Page 24
-110
, Evaluating
display group 55
Explanation
Page 24
-110
If displayed values are OK:
-
Press button to advance program
sequence.
- Press buttons -0- and -6- to select "End Output"
function 06, and press -Q- button to confirm
input.
- Switch ignition off.
Pa
ge 16 of 38 Throttle valve control module, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.2
Page 23 of 38
24-113
Throttle Position (TP) sensor, checking
Note:
Throttle Position (TP) sensor -G69- is located
inside the throttle valve control module -J338-.
Test conditions
Throttle valve in closed throttle position; if
necessary adjust accelerator pedal cable
Repair Manual, Fuel Supply System, Repair
Group 20
Cruise control adjustment OK
Power supply for throttle valve control
module OK; checking Page 24
-101
Checking
- Connect VAG 1551 or VAG 1552 scan tool and
press buttons -0- and -1- to insert "Engine
Electronics" address word 01 (with ignition
switched; engine not running) Page 01
-7 .
Rapid data transfer
HELP
Indicated on display
Pa
ge 23 of 38 Throttle valve control module, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.2
Page 33 of 38
24-119
Throttle valve control module,
adaptation to Engine Control Module
(ECM)
If the throttle valve control module -J338- is
removed and installed, or replaced, adaptation of
the throttle valve control module to the Motronic
ECM is required Page 24
-119
.
During "adaptation" with ignition switched on and
the engine not running, the Motronic ECM
"learns" the closed throttle position (CTP), wide
open throttle (WOT) and other positions of the
throttle valve control module, and a characteristic
curve of the relationship between Throttle
Position (TP) sensor -G69- and angle sensor for
throttle drive -G187-.
Required special tools and test equipment
VAG 1551 or VAG 1552 Scan Tool (ST) with
VAG 1551/3 adapter cable
Test conditions
No malfunctions stored in DTC memory
Page 01
-15
Throttle valve in closed throttle position; if
necessary adjust accelerator pedal cable
Pa
ge 33 of 38 Throttle valve control module, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.2
Page 36 of 38
24-121
- Compare display with specified values (display
fields 1-4):
Display fields
1 2 3 4
Display group 60: Basic setting-throttle valve control module
Display
xxx
xxx
Idle
Part throt
Full throt
Decel
Enrich ADP runs
ADP. OK
ADP. ERROR
Indicates Throttle valve
angle Throttle drive
angle Operating
condition Adaptation condition
Range
0-90
--- ---
Specified
value 0-5 Idle ADP. runs
ADP. OK
(ADP. ERROR indicates unsuccessful
adaptation)
If displayed values are NOT OK:
- Check DTC memory ( Page 01
-15
)
Pa
ge 36 of 38 Throttle valve control module, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.2