headlights AUDI Q5 2017 Owners Manual

Instruments and indicator lights
Instruments and indicator Lights
Instruments
Instrument cluster and controls
The instrument cluster is your central source of information.
Fig. 3 Overview of the instr ume nt cluste r
Hybrid drive*: the instrument cluster varies
c:;,page 101.
CD Coolant temperature gauge
@
®
©
®
Tachometer .............. ... .
Warning/indicator lights ...... .
ISETI button .... .. .. ..... .... .
Display
- Driver information system .... .
- T ime and date display ....... .
- Odometer .... .... ....... .. .
® Reset button for trip odometer
(J) Speedometer
® Fuel gauge
(D Tips
The illum inatio n for the instrument cluster
lights up whenever yo u switch on the ignit ion
w ith the
vehicle headlights off. As the day­
light fades, the instrument cluster illumina­
tion likewise dims automatica lly and will go
out comp letely when the outside light is very
low . This feature is meant to remind you to
switch on the headlights when outside light
conditions become poor .
8
8
9
11
9
17
10
10
10
10
Engine coolant temperature gauge
The engine coolant gauge¢ page 8, fig. 3 CD on ly
works when the ign ition is on . To prevent dam­
age to your engine, please note the following im­
portant points:
Engine cold
If the needle is at or close to the bottom of the
gauge, the engine has not yet reached its operat­
ing temperature. Avoid high engine speeds,
heavy engine loads, and heavy throttle applica­
tions .
Normal temperature
When the engine has reached its operating tem ­
perature, the needle will move to the middle of
the gauge and remain there.
If the engine is
working hard at high outside temperatures, the
needle may move higher on the gauge . This is not
a cause for concern as long as the . warning
li ght i n the inst rument cluste r display does not il-
luminate . ..,.

Lights and Vision
Exterior Lighting
Switching the lights on and off
Fig. 45 Instrument panel: l ig ht sw itc h
Sw itching on AUTO - Automatic headlight
controls
• Turn the light switch to AUTO c> fig . 45 .
Switching on the side ma rker lights
• Turn the light switch to :oo:: .
Switching on low beams
• Turn the light swi tch to gD.
Switching off the lights
• Turn the light switch to 0 .
The low beams only illum inate with the ign ition
turned on.
W ith the s ide marke r lights or head ligh ts sw itch­
e d on, the symbol ne xt to the light switch i llum i­
nates
:oo ::.
AUTO • Automatic headlight control
W ith the swi tch in the AUTO posi tion, the low
beams are switched on a utomat ica lly depending
on the ambient light, for example in a tunnel, at
d usk and when it is raining or snowing . When the
l ow beams are switched on, the
:oo: symbol
comes on . The low beams remain switched on re­
ga rdless of the amb ient lig ht when you turn on
the fog l ights.
~ W hen you turn off t he ignition, the low beams
~ are automat ically switched off . r-­N ...... 0 0
0:
co
Lights and V ision
Wi th a utomat ic head light con trol, you also h ave
t h e high-beam function available. However, if
yo u have not switched high beams back to low
beams while d riving with automatic headlight
contro l, only the low beams come on the next
t ime you turn on automa tic headl ight control. In
o rder to retur n to h igh beams agai n, you first
have to pull the hig h beam lever back to the nor­
mal pos ition an d then push the leve r fo rward.
Light sensor malfunction
In the event of a light sensor malfunction, the
drive r is notified in the ins trument cluster dis ­
play:
t!;I Automatic headlights / automatic w ipers
defective
For safety reasons, the low beams are turned on
permanent ly with the switc h in
AU TO . However,
you can continue to turn the lights on and off us­
i ng t he lig ht switch . Have the light sensor
c h ec ked as soo n as poss ible at an au thorized Aud i
dealer or other qualified workshop .
A WARNING
=
-Automatic headlights * are on ly inten ded to
a ss is t t he dr iver. They do no t relieve t he
d river of his respon sib ilit y t o ch eck t he
he adli ghts a nd to turn t hem o n manu ally
accordi ng to t he current l ight and visi bili ty
conditi ons. Fo r exam ple, fo g cannot be de­
tected by the light senso rs. S o always switch
on the headlights gD u nder these weather
conditions and whe n driving in the dark .
- Crashes can happen w hen you cannot see
the road ahead and when you cannot be
se en by other moto rists . A lways turn on the
hea dligh ts so t hat yo u ca n see ahea d an d so
that oth ers ca n see your ca r from th e back.
- Please obey all laws w hen us in g t he lighti ng
sys tems described here.
@ Tips
- The lig ht sensor for hea dlight control is lo­
cated in the rea r view m irro r mount. You
should the refore not apply any sticke rs to
the win dsh ield in this area in or der to pre­
v ent malfu nctions o r fail ures .
49

Lights and Vision
-Some exterior lighting functions can be ad ­
justed
c:>poge 50.
-When yo u remove your key from the igni ­
tion whi le the vehicle's lights are t urned on,
a buzzer sounds as long as the driver's door
i s open.
- In cool or damp weather, the inside of the
headlights, turn s ignals and tail lights can
fog over due to the temperature d ifference
between the inside and outs ide. They will
clear short ly after sw itch ing them on. This
does not affect the serv ice life of the light­
i ng.
- In the event of a light se nsor mal funct ion,
the driver is not ified in the instr ument clus ­
te r d is p lay
c;, pag e 29.
Fog lights
Fig . 4 6 Fog lig ht switch
• To turn on the fog lights }D, press button @
c:>fig. 46 .
• To turn on the rea r fog lights 0$, press button
@ .
Fog lights
The s ide marker lights or low beams must be
sw itched on. Whe n the fog lights are sw itched
on, the g reen check light at the edge of the
sw itch comes o n.
If automat ic driving light control AUTO is activat­
ed, the low beams are sw itched on when the fog
lights are turned on.
Rear fog lights
Low beams or side marker lights with fog lights
must be turned on.
50
When the rear fog lights are turned on, the yel ­
l ow check light at t he edge of the switch comes
on .
(D Note
The re ar fog lig hts should on ly be t urned on in
accor dance with traffic reg ulation, as the
li ghts are bright for following t raff ic .
Adjusting exterior lighting
The functions ore selected in the radio or in the
MMI".
• Sele ct: I CAR I func tion b utton > Exterior light­
ing . Or
• Select:
-1 c- A~ R~! function b utton > Car systems *
control button > Vehicle settings > E xterior
lighting .
Coming home (Lights when leaving car),
Leaving home (Light s when unlock ing ca r)
The coming home function ill uminates the area
outside the vehicle when you turn the ignit ion
off
and open the driver's door . Depending on vehicle
equipment, the function ca n be sw itched on and
off or the length of time the lights remain o n*
can be adj usted.
The leaving home illum inates the area outside
the ve hicle when you unlock the vehicle. This
funct ion can be switched on and off .
The Coming home and Leaving home functions
on ly operate when it is dark and the light switc h
i s in the
AUTO pos ition.
Auto headlights
When the light sw itch is in the AUTO c:> page 49
pos ition, the switch-on point of the lights can be
c hanged in the automat ic driving light function.
Daytime running lights
USA models: You can switch the daytime runn ing
li ghts
On and Off .
Canada model s:
The function canno t be tur ned
off.
It i s a ct ivate d automatically ea ch time the ig-
nit ion is switched on.
liJI.

a,
a,
..... N l"­N ..... 0 0
0:
co
Travel mode (Canada models)*
The headlight beam is asymmetrical. This pro­
vides stronger illumination on the side of the
road on which you are driving. If you are driving
in a country that drives on the opposite side of
the road from your own country, this will cause
glare for oncoming drivers. To prevent glare:
- Travel mode must be selected in vehicles with
Xenon headlights*.
- In vehicles with halogen headlights, certain
areas of the headlight lenses must be covered
with waterproof adhesive covers that prevent
light from passing through. For more informa­
tion, please see your authori zed Audi dealer or
authorized repair facility .
(!) Tips
When travel mode* is activated, a display in
the driver information system indicates this each time you switch the ignition on .
Adaptive light
Applies to: vehicles with adaptive light
When driving around bends, the relevan t area of
the rood is better illuminated .
Fig. 47 Adaptive lig ht when dr iving
Switching on adaptive light
.. Turn the light switch to AUTO c:> page 49,
fig. 45.
The adaptive light system is a combination of the
dynamic and the static cornering lights . With the
lights switched on, the dynamic cornering light
adapts to driving on curves . This is dependent
upon the vehicle speed and steering angle. This
provides better lighting through the curve. The
Lights and Vision
system operates in a speed range from approxi­
mately 6 mph (10 km/h) to 68 mph (110 km/h).
The static cornering light switches on at speeds
of up to approximately 25 mph (40 km/h) when a
certain steering wheel angle is reached or when a
turn signal is activated. The area to the side of
the vehicle is illuminated better when turning.
Emergency flashers
The emergency flashers makes other motorists
aware that you or your vehicle ore in on emer­
gency situation.
Fig. 48 E mergency flas her switch
~
9 a: a, m
.. Press the switch &, c:> fig. 48 to turn the emer-
gency flashers on or off .
When the emergency flashers are on, all four
turn signals blink at the same time . The turn sig­
nal indicator lights
B II in the instrument clus­
ter , as well as the light in the emergency flasher
switch ~ blink likewise. The emergency flashers
also work when the ignition is turned off.
The emergency flashers will turn on automatical­
ly if you are in an accident where the airbag has
deployed .
(0 Tips
You should turn on the emergency flashers
when:
-you are the last vehicle standing in a traffic
jam so that any other vehicles coming can
see you, or when
-your vehicle has broken down or you are in
an emergency situation, or when
51

a,
a,
..... N
" ('I ..... 0 0
0:
co
@Interior lights
Press the sw itch q fig . 50 in the co rresponding
position.
0 -Inte rior lights off
I -Interior lights on
If the switch is in the center position, the interior lighting is controlled automatically .
@ Front/rear reading lights
To tur n a read ing ligh t on/off, press the b utton
I::!! q fig. 50 or q fig . 51.
The appearan ce and location of the rear read ing
lig hts may differ depending on the model.
Instrument illumination
The basic brightness of the illumination for the
instruments, the cen ter console and the display
c an be a djusted.
F ig. 5 2 Instr ume nt ill um inatio n
• Press the knob to release it.
• Turn the knob toward "-"or" +" to reduce o r in­
crease the brightness .
• Press the knob aga in to ret urn i t to its orig inal
pos it ion .
@ Tips
The inst rument ill umination (for dia ls and
needles) lig hts o n when the ignition is switch ­
ed on and t he vehi cle lights are turned off . As
t he daylight fade s, the illum ina tio n of the di­
a ls li kewise dims au toma tically a nd wil l go
ou t com plete ly when the outs ide light is very
low. This feature is meant to remi nd you to
sw itch on the headlights when o utsi de light
conditions become poor.
Lights and V ision
Vision
Sun visors
Using the sun visors makes driving safer .
~
i:--o J®
Fig. 53 Sun visor
T he sun viso rs fo r the d river a nd passenger c an
be p ulled out of their brackets in the center of
the ve hicle and turned towards the doors
q fig. 53 @. After the s un visor has been turned
to the door, it can be extended* lengthwise .
Vanity mirror
The v anity mirrors on the sun visors are covered.
When the lid is opened @, the mirro r light in the
head line r turns on automatically . It turns off
when the lid is closed and the visor is fo lded up
again.
Sun shade
Applies to : vehicles with sun shade
Fi g. 54 Sun shade p ulle d up on a rea r w indow
• Pull the shade out and hang it in the bracket on
the upper door frame
q fig . 54.
53

Lights and Vision
Windshield wipers
Switching the windshield w ipers on
F ig. 55 W indshield wiper lever
F ig. 56 Rear w iper actuat ion
Move the windshield wiper lever to the corre­
spond ing pos ition:
@ -Windshield wiper off
(D -Interval mode. The windshie ld w iper auto­
matica lly activates when you drive 2 mph (4 km/
h). The h igher the sensit ivity of the rain sensor is
set (switch @to the right), the earlier the wind ­
shield wipers react to moisture on the wind­
shie ld. In some models, you can switch rain sen­
sor mode off and sw itch intermittent mode on in
the MM!* . Select:
!CARI function button> Car
s y stem s*
control button > Driver a ssi st > Rain
s en sor .
In inte rm ittent mode, yo u can adjust the
i n terval time using the @switch.
@-Slow wipi ng
@ -Fast wiping
@-Sing le wipe
® -Clean the windshield . To elimin ate water
d roplets, the winds hield wipe r performs one af­
terwipe operatio n afte r seve ral seconds while
driving . You can switch this f unction off by mov -
54
ing the leve r to pos ition ® within 10 seconds of
the afterwipe ope ration. The afterwipe function
i s react ivated the next time the ignition is sw itch­
ed on.
The rear wiper automatica lly switches on when
the reverse gear is engaged and the front wind­
shield wipers are on and in operation .
Cl eaning the headlig hts*. The headlight was he r
system * operates only when the headlights are
on . If you move the lever to position@, the
headlights are washed in intervals.
@ -Wipe the rear w indow. The rear w iper moves
a bout every 4 se conds .
(!)-Clean the rear w indow . T he number of wip­
i ng operations depe nds on how long the lever is
held in position 7.
& WARNING
- Th e rain sensor is on ly inten ded to ass ist the
driver. The driver is st ill responsi ble for
manually switch ing the wipers on according
to the visibility cond itions.
- The windsh ield may not be t reated with wa­
ter-repelling windshield coating agents. Un­
favorable condit ions, such as wetness, dark­
ness, low sun, can resu lt in i ncreased glare.
Wiper blade chatte r is also possib le.
- Properly functioning windshield wiper
blades are required for a clea r view and safe
driving.
@ Note
- In the case of frost, c heck whether the
windshield wiper blades are frozen to the
windshield . Switching on the w indshield
w ipers can damage the w iper blades!
- Pr ior to us ing a car wash, the w indshield
wiper system must be sw itched off (lever in
posit io n 0) . This helps to preven t un inte n­
ti onal sw itchi ng on and damage to the
w indshield wipe r sy stem.
(D Tips
-The windshie ld w ipers are switched off
when the ig nitio n is turned off. Activate th e
w ind shield wipe rs a fter the igni tion is .,.

a,
a,
..... N r-­N ..... 0 0
0:
co
The mirror returns to its initial position as soon
as reverse gear is dis e ngaged and vehicle speed is
above about 9 mph (15 km/h) . T he mirror also
returns to its ini tial posit ion if the switch is
moved to the driver's exter ior mirror © or the ig­
n ition is switched off .
If the position of the m irror surface is changed
on a ti lted mirror , this new position will be auto­
matically assigned to the remote key when the
vehicle is taken out of reverse gear .
(D Note
- Curved mirror surfaces (convex or spheri­
cal") increase your field of v iew . Remember
that vehicles or other objects will appear
smaller and farther away than when seen in
a flat mirror . If you use th is m irror to esti­
ma te distances of following vehicles when
changing lanes, yo u could estimate incor­
rectly and cause an a ccident.
- If the mir ror housing is moved unin tention­
ally (for example, wh ile pa rking yo ur vehi­
cle), then you must first fold the m irror
electrica lly. Do not read just the mirror
hous ing manua lly. You could damage the
motor which contro ls the mirror.
- If you wash the vehicle in an automatic car
wash, yo u m ust fold the exterior m irrors in
to reduce the risk of damage to the mirrors. Never fold power folding exterior m irrors*
by hand . Only fold them in and out using
the power contro ls .
@ Tips
If there should be a ma lfunction in the e lec­
trical system, you can still adjust the exterior m irro rs by p ressing the edge of the m irror .
Lights and V ision
Dimming the mirrors
Fig. 60 Auto ma tic dimmin g rearvi ew m irror*
Manu al anti-glare adjustment
.. Move the small lever ( located on the bottom
edge of the mirror) to the rear .
Automat ically dimm ing mirro rs*
.. To dim the rearview mir ror and both exterior
m irrors *, press the@ button. The diode @
turns on . The rearv iew and exterior mirrors*
dim automatically when light shines on them ,
for example from headlights on a veh icle to the
rear .
_&. WARNING
-Electrolyte flu id can leak from automatic d im­
ming m irrors if the glass is broken. Ele ctro­
l yte fluid can i rr itate sk in, eyes and respirato­
ry system .
- Repeated or p rolonged exposure to electro­
ly te ca n cause irri tat ion to the resp iratory
system, especially among people with asth ­
ma or other respiratory conditions. Get
fresh air immediately by leaving the vehicle
or, if that is not possible, open windows and
doors all the way.
- If electro lyte gets into the eyes, flush them
thorough ly w ith large amounts of clean wa ­
ter for at least 15 m inutes; medical atten­
tion is recomme nded .
- If electrolyte contacts skin, flush affected
area with clean water for at least 15 mi­
nutes and then wash affected area with
soap and water; medical attention is recom­ mended. Thoroughly wash affected cloth ing
and shoes before reuse .
~
57

CD
CD
.... N ,-... N ..... 0 0 C<'. 00
wash operator to reduce the risk of acci­dents.
- To reduce the risk of cuts, protect yourself
from sharp metal components when wash­
ing the underbody or the inside of the wheel
housings .
- After washing the vehicle, the brak ing effect
may be delayed due to mo isture on the
brake rotors or ice in the w inter . This in­
creases the risk of an acc ident. The brakes
must be d ried fi rst w ith a few careful b rake
applications.
(D Note
- If you wash t he vehicle in an automatic car
wash, yo u m ust fold the exte rior m irrors in
to reduce the risk of damage. Power fo ld ing
exter ior mir ro rs* m ust only be folded in and
out using t he power folding fu nction .
- To reduce the risk of damage to the rims
a nd ti res, compare the width between the
whee ls on your vehi cle w it h the dis tance be­
tween the guide rai ls in the car wash.
- To reduce t he risk of damage, compare the
height and width o f yo ur vehicle wi th the
Ca re and cleaning
height and w idth of the inside of the car
was h.
- T o red uce the risk of pa int damage, do not
was h the vehicle in d irect sun light .
- T o red uce the risk of d am age to the s urf ace,
do not use insect removing sponges, k itche n
sponges or similar items .
- Mat te finish painted veh icle components:
- To reduce the risk of damage to the sur-
face, do not use polishing agents or hard
wax .
- Never use protective wax. It can destroy
the matte finish effect .
- Do not place any stickers or magnetic
signs on vehicle parts painted with matte
finish paint . The paint cou ld be damaged
when the stickers or magne ts are re­
moved .
@ For the sake of the environment
Only wash t he vehicle in facilities s pec ially de­
s igned for that pu rpose . This will reduce the
r isk of dirty wate r contaminated with oil from
ente ring the sewe r sys tem.
Cleaning and care information
When clea ning and caring for individua l vehicle
components, refer to the following tables. The
i nformation contained there is simply recom ­
mendations. For quest ions or for components t
h at are not listed, cons ult an autho rized Aud i
de aler or au thori zed Audi Se rvice Fac ility. Also
f o llow the information fo und in ~ .&. -
Exterior cleaning
Component Situation Solution
Windshield wiper
Deposits ~ page 55, Cleaning windshield wiper blades
blades
Headlights /
Deposits Soft spo nge with a m ild soap solution3>
Tail lights
Sensors /
Deposits Sensors: soft cloth wit h solvent-free cleaning solut ion
camera lens es Camera le nses: soft cloth w ith a lcohol -free cleaning solu-
tion
Snow/ice Hand br
ush/solvent-free de-icing spray
Wheels Road salt Water
Brake dust Acid-free special cleaning so
lution
E xhaust tail pipes Road salt Water, clean ing so lution su itab le for stainless stee l, if nee-
essary
205

CD
CD
.... N ,-... N .... 0 0 c:<: 00
Care and cleaning
Component Situation Solution
T ex til es
Deposits adhering to Vacuum cleaner
art ifici al leat her, the surface
A lcan tara Water-based deposits Absorbent
cloth and mild soap solutiona>
such as coffee, tea,
b lood, etc.
Oil -based deposits Apply a m ild soap solution
a), blot away the dissolved o il or
such as oil, make-up, dye, treat afterward with water, if necessary
etc.
Special deposits such Special stain
remover, blot with absorbent material, treat
as ink, nail polish, la- afterward with mild soap solution, if necessary
a)
tex paint, shoe pol-
ish, etc.
Natu ral le ath er Fresh stains Cotton cloth with a mild soap solution a>
Water-based deposits Fresh stains: absorbent cloth
such as coffee, tea, Dried stains : stain
remover suitable fo r leather
b lood , etc.
Oi l-based deposits Fresh stains: absorbent cloth and stain
remover suitable
such as oil, make-up, for leather
etc. Dried stains : grease dissolving spray
Special deposits such Spot remove r suitab le for leather
as ink, nai l polish, la-
tex paint, shoe pol-
ish, etc.
Care Regularly apply condit ion ing c ream that protects from
lig ht and penet rates into the material. Use specia lly-co l-
ored conditioning cream, if necessary .
Carbon part s Deposits clean the same way as plast ic parts
a) Mi ld soap solution: maximum two tablespoons of neutral soap in 1 q uart (1 liter) of water
.8, WARNING
The windshield may not be trea ted with wa­
ter-repelling windshield coating agents. Un ­
favorable cond itions such as wetness, dark­
ness, or low sun can result in increased glare.
Wiper blade chatter is also possible.
@ Note
- Headlight s/tail li ght s
-Never clean headlights or tail lights with a
dry cloth or sponge.
- Do not use any cleaning product that con­
tains alcohol, because they could cause
cracks to form.
- Whe els
-
- Never use a ny pa int polish or other abra­
sive materials .
- Damage to the protect ive layer on the
rims such as sto ne ch ips or scratches must
be repaired immediately .
-Sen sor s/camera l enses
- Neve r use warm or hot water to remove
snow or ice from the camera lens . This
could cause the lens to crack .
- Neve r use ab rasive cleaning materials or
a lcohol to clean the camera lens . This
could cause scratches and cracks .
-Door window s
-Remove snow and ice on windows and ex-
terior mirrors w ith a plast ic scraper . To
207

CD
CD
.... N ,-... N ..... 0 0 C<'. 00
& WARNING
-Brake fluid is poisonous. It must be stored
only in the closed original container out of
the reach of children!
- Brake failure can resu lt from old or inappro­
priate brake fluid. Observe these precau­
t ions:
- Use only brake flu id that meets SAE speci­
fication
J 1 703 and confo rms to Fede ral
Motor Vehicle Standard 116. Always check
with your author ized Audi dealer to make
sure you are using the correct brake fluid.
The correct type of brake fluid is a lso indi­
cated on the brake flu id reservoir.
- The brake fluid must be new. Heavy use o f
the brakes can cause a vapor lock if the
brake fl uid is left in the system too long.
This can serious ly affect the efficiency of
the brakes as well as your safety. This
could result in an acc ident.
Brake fluid w ill damage the pa int of yo ur vehi­
cle.
@) For the sake of the environment
Because of the prob lem of proper disposal of
brake flu id as we ll as the special tools re­
qui red and the necessary expertise, we rec­
ommend that you have the brake fluid
changed by your author ized Audi dealer.
Battery
General information
Under normal operating conditions, the battery
in your Audi does not need any maintenance.
W ith
high outside temperatures or long da ily
drives we recommend that you have the electro­ lyte level checked by an authorized Audi dea ler or
qua lified workshop. The e lectrolyte level should
a lso be checked each t ime the batte ry is charged
¢ page 22 7.
H ave the battery checked when you take your ve­
hi cle in for serv ice. You a re well advised to re­
p lace a batte ry that is o lde r than 5 years .
Check ing and Filling
Hybrid dr ive *: you can find important in format ion
about the high voltage battery under
¢ page 100.
Disconnecting the battery te rminals
Some vehi cle functions (power window regula ­
tors, for examp le) are lost if the batte ry te rm i­
nals a re disconnected . These functions have to be
re learned after the battery terminals a re con­
nected again. To prevent this, the battery should
only be disconnected from the vehicle electrical
system when absolutely necessary for repa irs.
Vehicles not dr iven for long p eriod s
If you do not drive your vehicle over a period of
severa l days or weeks, electrical compone nts are
gradually cut back or switched off. This reduces
energy consumpt ion and maintains starting ca­
pability over a longer per iod
¢ page 192.
T ake into consideratio n that when you unlock
your vehicle, some convenience functions, suc h
as the inter ior lights or the power seat adjust­
ment, may not be ava ilab le. The conve nience
funct ions will be available again when you turn
on the ignition and sta rt the eng ine.
Winter operation
D uring the winter months, battery capacity tends
to decrease as temperatures drop. This is be­
cause more power is also consumed while start­
i ng, and the headlights, rear w indow defogger,
etc., are used more ofte n.
Avo id unnecessary power consumption, pa rtic u­
larly in city traff ic or when traveling only short
distances . Let your author ized Audi dealer check
the capacity of the veh icle batte ry before winter
sets in
¢ page 22 7. A we ll charged batte ry will
not only p reve nt start ing prob lems when the
wea the r is co ld, but will also last longer.
Working on the battery
Be especially careful when working on or near
the battery.
T he battery is loca ted in t he luggage compart­
ment unde r the floo r. B efo re yo u check any thing .,..
225