display AUDI Q7 2018 Owner´s Manual

Cockpit overview
On-board computer
F ig. 12 Instrument cluste r: fuel cons umptio n display
Resetting values to zero
Requirement: the Fuel consumption , Short-term
memory or Long-term memory
display must be
selected .
.. To reset the values in the respect ive memory to
z ero, press and hold the left thumbwheel on
the multifunction steering wheel for one sec­
ond . Or
.. On the multifunction steer ing whee l, select :
the right control button
> Reset values.
In the tr ip computer, you can call up the follow­
ing d isplays one after the other by turning the
left thumbwheel on the multifunction steering
wheel.
- Time and date¢
page 245
- Digital speedometer*
-Average consumption
-AdBl ue range*
¢ page 314
-Short-term memory overview
- Long-term memo ry ove rview
- Energy consumers*
¢page 16
-Driver assistance* c::> page 102
- Traffic s ign recognition* ¢ page 97
The short -term memory collects driving informa­
tion from the t ime the ignition is sw itched on un­
til it is switched off . If you continue driving with­
in two hours after switching the ignition off, the
new values are included when calculating the cur­
rent tr ip informat io n.
Unlike the short-t erm memory, the long -term
memory is not erased automat ica lly . You can se­
lect the time period for evaluating trip informa­
tion you rself .
16
Fuel consumption
The current fuel consumption can be shown us­
i ng a bar graph ¢
fig. 12. The average consump ­
tion stored in the short-term memory is also dis­
played. If the bar is green, your vehicle is saving
fuel through the following function:
- Recuperation : electrical energy can be stored i n
the vehicle battery when the vehicle is coasting
or driving down hill. The bar will move toward
0.
@ Tips
The date, time of day and time and date for­
mat can be set in the Infota inment system
¢page 245.
Energy consumers
App lies to : vehicles wit h energy co nsum ers
Fig. 13 Ins trumen t cluster: en ergy cons umers
In the Energy consumers view, the other equip­
ment that is current ly affecting fue l consumption
i s listed in the first tab (on-board computer). The
display shows up to three energy consumers @
¢ fig. 13. The equipment using the most power is
li sted first . If mo re than three items using power
are switched on, the equipment that is currently
u sin g the most power is displayed.
A gauge @ also shows the current total con­
sumption of all othe r consumers .

a co ...... N r--. N ...... 0
0
:E - Engine oil temperature display and boost
indicator
Applies to: vehicles with engine oil temperature display/boost
indicator
Applies to: vehicles with analog instrument cluster
The engine oil temperature and boost indicator
are only show n in the lap timer disp lay
~ page 98 .
Engine oil temperature indicator
Applies to: vehicles with Audi virtual cockpit
The engine oil temperatu re is only shown in t he
e nhanced view or in the spo rt view ~
page 14.
When engine oil temperatures are low, the dis­
p lay -- -°F ( ---
0
() appears in the inst rumen t clus ­
ter .
The engine has reached its operating tempera­
ture when the engine oil temperature is between
176 °F (80 °() and 248 °F (120 °() under normal
d riving conditions . The eng ine oil temperatu re
may be hi gher if there is heavy eng ine load and
hi gh temperat ures outside. This is not a ca use for
concer n as long as the . ~
page 23 or II
~ page 24 ind icator lights do no t tu rn o n.
Boost indicator
Applies to: vehicles with Audi virtual cockpit
The boost indica to r is only displayed in the sport
v iew ~
page 14.
The current engine load (meaning the c urrent
boost p ressure) is indicated by a ba r.
Head-up display
Applies to: vehicles with head-up display
Fig . 14 In st rum ent pa ne l: kn ob for the hea d-up d is pl ay
Cockpit overview
T he head -up d isp lay pro jects certain wa rnings or
se lected information from the assist systems* or
navigation* on the windsh ield . The display ap­
pears w ith in the driver's field of vision .
Switching on/off
"" To switch t he head- up display on, press the~
knob.
.. To switch t he head -up display off, press the~
knob .
Adjusting the height
The he igh t of t he d isplay can be adjus ted to the
individ ual d river .
"" Ma ke sure you are seat ed co rrectly
~ page 253.
""Tur n the knob~ to adjus t the disp lay.
Settings in the Infotainment system
"" Select in the Infotainment system: I MENU ! but­
ton
> Vehicle > left control b utton > Driver as­
sistance > Head-up display .
Display content
In the Infotainment system, you can specify
which information should be d isp layed: For ex­
amp le , this ca n include navigatio n information *,
adaptive c ruise co ntro l* or camera-based traffic
s ign recognition*.
The display o f ce rtain information and some of
the red indicator l igh ts can not be hidden in the
Infota inment system.
Brightness
You can adjust the disp lay br ightness in the Info­
ta inment system . The display br ightness decreas­
es automatically as the amount of light decreas ­
es. The backg round br ightness is ad justed w ith
the instr ument illumination ~
page 47.
Picture rotation
You can rotate the picture in the Infotainment
system clockwise or counterclockwise.
17

Cockpit overv ie w
{QJ Note
To prevent scratches on the g lass covering the
head -up d isp lay, do not place any ob jects in
the projection opening.
(D Tips
- Sung lasses with polarization fi lters and un ­
favorab le lighting conditions can have a
negative effect on the display.
- An optimum display depends on t he seat
position and the height adjustment of the
head-up display.
- A specia l windshield is needed for the head ­
u p d isp lay f unction.
- For information on cleaning, see¢
table In ­
terior cleaning on page 353.
Indicator lights
Description
The indicato r lights in the inst rument cl uste r
blink or t urn on. They indica te funct ions or ma l­
f u nctions.
M essages may appea r with some indicator lights.
A wa rni ng sig nal w ill sound at the same t ime.
The indicato r lights and messages in the ins tru ­
ment cluster display can be covered by other d is ­
p lays. To show them again, select the second tab
with the mu ltifunction stee ring wheel
¢ page 12.
If there are several malfunctions, you can d isplay
them one at a time using the thumbwheel.
Some indicator lights in the disp lay can display in
several colors.
& Central indicator light
If the . or Q indicator light turns on, check
the message in the instrument cluster .
Overview
Some indicator lights turn on briefly as a function
check when you switch the ign ition on . These sys­
tems are marked wit h a./ in the following tables.
I f one of these indica to r ligh ts does not tur n on,
there is a ma lfu nction in t hat system.
18
Red indicator lights
--------------
Centra l indicator light
¢ page 18,
Audi pre sense*
¢page 112
USA models:
Brake system ./
¢page 21
Canada mod els:
B rake system ./
¢page 21
USA models:
Electromechanical parking brake
¢ page22
Ca nada model s:
E lectromechanical parking brake
¢ page 22
Cooling sys tem
¢page 22
Eng ine o il p ress ure
¢page 23
Engine o il level (MI N)*
¢ page24
Alternator
¢page 23
Safety be lt
¢ page 23
Electromechanical power steering,
all-wheel steering* ./
¢page 146
Steering lock
¢ page24
Eng ine sta rt system
¢page24
Transmission
¢page 90
Hood
¢page24
Adaptive cruise contro l*./
¢ page 104
Traffic jam assist*
¢page 109

Cockpit overview
A WARNING
Have the safety systems inspected immedi­
ately. Otherwise, there is a risk that the sys­
tems may not activate during a collision,
which increases the risk of serious injury or
death.
( CD ) Brake system
[I] Brakes overheating. Please shift to D
-
There was a heavy load on the brakes. Place the
selector lever in the "D/S" position in order to use
the engine braking effect and reduce the load on
the brakes.
~t~J/(O : Brake pads
II (USA models)/EiJ (Canada models) Brake
pads: wear limit reached. You can continue driv­
ing. Please contact Service
The brake pads are worn .
Drive to an authorized Audi dealer or authorized
Audi Service Facility as soon as possible to have
the malfunction corrected.
~ Engine control
II Drive system: malfunction! Please contact
Service
There is an engine control malfunction.
Drive slowly to an authorized Audi dealer or au­
thorized Audi Service Facility to have the engine
checked .
W Engine control (diesel engine)
Applies to: vehicles with diesel engines
The engine is preheating if the II indicator light
turns on when the ignition is switched on.
If the indicator light does not turn on or blinks
while driving, there is an engine control malfunc­
tion.
Immediately drive slowly to an authorized Audi
dealer or authorized Audi Service Facility to have
the malfunction corrected.
26
!?i Engine speed limitation
(II Maximum engine speed: XXXX rpm
The engine speed is automatically limited to the
speed displayed in the instrument cluster. This
protects the engine from overheating.
The engine speed limitation deactivates once the
engine is no longer in the critical temperature
range and you have released the accelerator ped­
al once .
If the engine speed limitation was activated by
an engine control malfunction, the
II indicator
light also turns on . Make sure the engine speed
does not go above the speed displayed, for exam­
ple when downshifting . Drive to an authorized
Audi dealer or authorized Audi Service Facility im­
mediately to have the malfunction corrected.
(D Tips
Depending on the engine: the engine speed
may be limited when the engine is cold -the
full engine output will not be available. When
the engine is at operating temperature, the
red area in the tachometer moves to a higher
RPM range.
~ ... Engine oil sensor
• Oil level system: malfunction! Please con­
tact Service
The sensor to check the engine oil level has
failed . Drive to an authorized Audi dealer or au­
thorized Audi Service Facility immediately to have
the malfunction corrected.
• Oil level sensor: oil change necessary. Please
contact Service
Fuel has entered the engine oil as a result of fre­
quent short drives. Avoid high engine speeds, full
acceleration and heavy engine loads. Drive to an
authorized Audi dealer or authorized Audi Service
Facility immediately to have the oil changed.
• Oil pressure sensor: malfunction! Please
contact Service
There is a malfunction in the oil pressure sensor.
Drive to an authorized Audi dealer or authorized .,.

Lights and Vi sion
Turn signal and high beam lever
The lever operates the turn signals, the high
beams and the headlight flasher .
®
,
I
@
Fig . 34 Turn s ig nal and hig h bea m le ver
Tu rn signal s ¢i Q
N
0 0
> u. a,
The turn s ignals activa te when you move the lev­
er into a turn signal position w hen the ignition is
switched on.
(D -Right tu rn signa l
@-Left turn signal
The turn signal b links three times if you just tap
the lever.
High b eams and h eadlight flash er ~D
Move the lever to the corresponding position:
@ -H igh beams on (vehicles with h igh beam as­
sistant* ¢
page 44)
©-H igh beams off or headlight flasher
The
ii indicator light in the instrument cluster
turns on .
A WARNING
High beams can cause glare for other drivers,
wh ich increases the risk of an accident . For
this reason, only use the h igh beams or the
head light flasher when they w ill not create
glare fo r other d rivers.
44
High beam assistant
App lies to : vehicles wit h high bea m ass istant
The high beam assistant automatically turns the
high beams on or off depending on the surround­
ing conditions .
A camera on the rearv iew mirror mou nt can de­
tect light sources from other road users . The high
beams switch on or off automatically depend ing
on the pos it ion of vehicles d riving ahead and on­
com ing vehicles , the veh icle speed and other en­
v ironmental and traffic cond it ions.
Activ ating high b eam ass istant
Requirement: the light sw itch must be set to the
AUTO pos it ion and the high beam ass istant must
be switched o n in the Infota inment system
¢page 45.
"'To act ivate the high beam ass istant, tap the
lever forward @~
page 44, fig . 34 . The Iii in­
dicator light appears in the inst rument cluste r
disp lay and the high beams a re swit ched on/off
automa tically. If t he h igh beams we re com­
pletely or pa rtially switched on, the
IIJ indica­
tor light turns on.
Switching the high beams on /off manually
If the high beams d id not switch on/off automat­
i ca lly as expected, yo u may switch them on or off
manua lly ins tead :
"' To switch the h igh beams on manually, tap the
lever forward @~
page 44, fig. 34. The ii in­
dicator light turns on.
"'T o switch the h igh beams off man ua lly, pull the
lever back ©¢
page 44, fig. 34 . The high beam
assistant is deactivat ed.
Operating the headlight flasher
"' To operate the headlig ht flasher when the high
beam ass istant is activated and hig h beams are
switched off, pull the lever back ©¢
page 44,
fig. 34 .
The high beam assistant remains ac ­
tive.
Messag es in the instrument cluster display
m;J Audi adaptiv e light : malfun ction! Se e own­
e r's manual

a co ...... N r--. N ...... 0
0
:E ' Interior lighting
Applies to: vehicles with inter ior lighting
.. Se lec t in the Info tainmen t system: !M ENUI but­
ton
> Vehi cle> left contro l button > Vehicle
s ettings > Int erior lighting.
The interior lighting turns on when you switch
the head ligh ts on whi le the igni tion is on .
T he storage compartment in the doo r is i llum i­
nated when yo u reach your hand in to the storage
compartment .
Version 1
To adjust the b rightness of individua l zones, se­
l ect
Front brightness *, Door br ightness or Foot ­
well brightness .
Turn the control knob to the left
or to the r ight . Press the co ntro l knob to conf irm
the br ightness .
Version 2
Select and confirm one of the displayed profiles
by pressing the con trol knob.
Individual : you can customize the br ightness and
colo r of individual zones. Press the right control
button. P ress the cont rol knob again to confirm
the settings.
Audi drive select: the interior and contour light­
ing color changes depending on the driving mode
selected in drive select*¢ page 128.
{!) Tips
The setting is a utomat ica lly stored and as ­
signed to the remote contro l key that is be ing
used.
Lights and V ision
Instrument illumination
T he brightness of the illumination for the instru­
ments, display and head-up display* can be ad­
justed .
"' t==~====:::::::::'.=== ===:::::=:::::::===- -!
i
Fig. 39 Instrume nt illumin ation
.. Press the knob to release it .
.. Tur n the knob toward" -" or" +" to reduce or in­
crease the br ightness.
.. Press the knob again to return it to its or iginal
position .
(D Tips
Depending on vehicle equipment, the instru­
ment illumination (needles and gauges ) may
turn on w hen t he lig hts are off and the igni­
tion is swi tched on. The illuminat ion fo r the
gaug es reduc es au toma tically and eventua lly
t urns off as br igh tness ou tside in crea se s. Th is
f u ncti on re mind s the dr iver t o turn the low
beams on at the appropriate ti me.
Vision
Adjusting exterior mirrors
Fig. 4 0 Driver 's doo r: knob fo r the exter io r mir rors
Turn the knob to the des ired position:
i CD
47

a co ...... N r--. N ...... 0
0
:E ' Lights and Vision
Adjusting the magnetic zone
A pplies to: ve hicles with d ig ital compass
The magnetic zone must be adjusted correctly for the compass to read accurately.
Fig . 49 Magnetic zone map
• Press and hold the button @ Q page 52, fig. 48
unt il the number of the selected magnetic zone
appea rs in the rearview mir ror .
• Press t he b utton @repeatedly to sele ct the
correc t magnetic zone . The sele ct ion mode
tu rns off after a few seconds .
Calibrating the compass
Appl ies to: ve hicles w ith d ig ital compass
I f the display is in corre ct or inaccurate, the com­
pass mus t be recalibrated .
• Press and hold the button @ until a C appears
in the rearv iew mirror.
• Drive in a c ircle at about 6 mph ( 10 km/h) unti l
a d irec tion is disp laye d in the in ter ior rearview
mir ror.
A WARNING
To reduce the risk to yourse lf a nd o ther driv­
ers, calib ra te the compass in an area where
the re is no t raffic .
.
53

Seats and storage
A WARNING
-To reduce the risk of an accident, the seat
can only be adjusted when the vehicle is sta­
tionary.
- Be careful when adjusting the seat. Adjust­
ing the seat without paying attention can
pinch fingers or limbs, which increases the
risk of injury.
- Always pull forward on the backrest to make
sure it is check if it is correctly locked in
place.
Entry/exit assistance (second row seats)
Applies to: ve hicles with entry ass istance
Entry/exit assistance creates easier access to the
third-row seating*.
•
Fig. 55 Second-row seating: folding th e seat down
Fig. 56 Second-row seating: folding th e seat upright
To be able to enter and exit, you must fold the
backrest on the second row seat down, and then
fold the seat upward.
Folding the second row seat backrest down
.,. Pull the lever upward ~ page 55, fig. 53. Or
.,. From the third row seat*, pull the release strap
on the seat in front -arrow-
r:=;, fig. 55 .
.,. The backrest folds down by itself.
56
Folding the second row seat upward
.,. Pull the seat up by the lever (I) until it is folded
upward
~ fig. 56.
If the second row seats are not folded down and
locked into the floor when you begin to drive,
then thE'
d indicator light turns on in the instru­
ment cluster display as well as the message
Sec­
ond row seat unlocked. Risk of injury for rear
passengers.
A warning tone will also sound.
A WARNING
- When the second row seats are folded
down, they must not be used as a footrest
or have objects placed on them as this in­
creases the risk of an accident .
- To reduce the risk of an accident, never al­
low people to ride in the third row* if the
second row seats are folded upward.
- To reduce the risk of an accident, never drive w ith objects on the folded th ird row* backr­
ests if the second row seats are folded up­
rig ht.
- Be mindful of persons in the third row*
when folding down the second row seats.
Not paying attention when folding down
seats can cause pinching injuries.
- Always pull forward on the backrest to make
sure it is check if it is correctly locked in
place.
- If you are unlocking the second row seat
backrest from the third row seat*
r:=;, fig. 55,
be careful of any passengers in the second
row seats or within the backrest's range of
motion. Not paying attention when folding
down seats can cause injuries.
(D Note
To reduce the risk of damage, move the rear
head restraints down before folding the rear
backrests forward
r:=;, page 58.

~ Cooling mode*
The max imum coo ling mode can be sw itched on
and off using the~ button. The air is not cooled
and h umidity is not removed when cooling mode
is switched off. This can cause fog on the win ­
dows. Cooling mode switches off automatica lly
when the outside temperature is below zero.
When the coo ling mode is sw itched on,~ the
veh icle interior is cooled and dehum id ified as
qu ickly as possib le .
cE:> Recirculation mode
In recircu lation mode, the a ir inside the vehicle is
ci rcu lated and fi ltered. This prevents the unfil­
tered air outside the vehicle from entering the
veh icle inter ior . Switch ing recirculation mode on
when dr iv ing t hrough a tunnel or when s itti ng i n
traffic is recommended
~ ,& .
Using the button, recirculation mode is switched
on and off us ing the
ol;) button . You can also
sw itch the recircu lation mode off by pressi ng the
knob @) or the off us ing th e ~ button.
AUTO Autom atic mode
Automatic mode ma inta ins a constant tempera­
ture ins ide the veh icle . Air temperature, airflow
a n d a ir distribution are controlled automatica lly .
You can switc h automatic mode on or off by
p ressing the knob @.
Temperature
You can adjust the temperature be tween 60° F
( + 16°C) and 84°F (+28°() by tur ning the knob
@ . If outs ide of this range,
LO or HI will appea r
in the cl imate contro l system display. At bot h of
these se tt in gs, the cl imate contro l system runs
con tinuously at ma ximum coo ling o r hea ting
power. There is no temperature regula tion .
86'~ Blower
You can adjust the volume of a ir generated by the
b lowe r to yo ur preference using the rocker
sw itches @. T he blower should always ru n at a
l ow se tt ing to preven t the wi ndows from fogg ing
~ an d to ens ure a continuous exchange of ai r ins ide
...... "' the vehicle . To have the b lowe r reg ulated auto-
" ~ mat ica lly, press the knob @. 0
0
::r ' Warm and c old
Air distribution
Yo u can use the rocker sw itches @to adjus t the
ven ts where the air wi ll flow o ut o f. Press t he
roc ker switches @repeatedly unti l the desired
air distrib ution setting is disp layed in the climate
contro l system contro ls . To have the air distribu ­
t ion regulated automat ically, press the knob @.
J ~ Seat heating /ventilation*
P ressing the JI~ but ton switches the sea t
heating/ventilation on at the highest setting
( lev el 3). The LEDs indicate the temperatur e lev ­
el. To reduce the tempe rature, press the button
again. To swi tch the seat heating/ventilat ion off,
press the b utton repeatedly unti l the L ED turns
off .
@ MAX Defogging
The w indshield and side windows are defrosted
o r cleared of condensat ion as quick ly as poss ible.
The maximum amount of air flows mainly from
the vents below the windsh ield . Recirculation
mode switches off . The temperat ure should be
set at +72°F (+22°C) or highe r. T he tempe rature
i s con trolled automat ica lly.
Defrost is sw itched on and off®
MAX button.
You can also sw itch the f unct io n off by press ing
t h e knob @.
Applies to vehicles with windshield defogger: the
windshield defogger switches on automatically
when ou tside tempera tures are low . If you would
li ke to sw itch the windsh ield defroster on ma n­
u ally, press the ~ button. The L ED in the button
blinks.
[ffi) REAR Rear window defogger
Press the button ~ to switch the rear window de ­
fogger on .
It only operates when the engine is
r un ning . It switc hes off automatically afte r 10 to
2 0 m inutes, depe nding on the ou ts ide tempera­
tu re .
T o keep the rear w indow defogge r o n con tinuous­
ly, press a nd ho ld the
Qul R EAR butto n longe r
t h an th ree seco nds. This is sto red un til the ign i-
t ion is swi tched o ff. ..,.
71

Warm and cold
SYNC Syn chr oniz ation
Use t he rocker sw itc h CD to select the f unct ion.
When synchronization is switched on, the set­
tings for the driver's side are applied to the front
passenger's side and the rear (except for seat
heating/venti lation*). When the settings on the
front passenger's side or in the rear are changed,
the synchron izat ion is automatically switched off
and
4- zone appears in the display .
SET REAR function
Use the rocker switch CD to select the function .
When the function is switched on, you can adjust
all settings for the rear us ing the climate control
system controls in the cockpit . The rear climate
control system controls cannot be operated at
the same time . T his function switches off auto­
mat ica lly after a ce rtain per iod of t ime or after
leav ing the menu.
Vents
You can open or close the center and rear vents in
the cockpit and the vents in the rear center con­
sole and door p illars using the r idged thumb­
wheels. The levers adjust the d irect io n of the a ir­
flow from the vents. The w ide vent is opened and
closed using the~ button ~
page 8, fig. 2@ .
Residual heat
You can activate the residual heat function when
the ignition is switched off by pressing the knob
© (left side). The residual heat from the coolant
is used to heat the ve hicle in ter io r. The res id ual
heat function switches off automatically after
about 15 minutes.
A WARNING
- You should not use the recirculation mode
for an extended period of time, because no
fresh air is drawn in and the windows can
fog when cooling mode is sw itched off . This
i ncreases the risk of an accident .
- Individuals with reduced sensitivity to pain
or temperature could develop burns when
us ing the seat heating function . To reduce
the risk of injury, these ind iv iduals should
not use seat heat ing.
72
@ Note
To avoid damage to the heating elements in
the seats, do not knee l on the seats or p lace
heavy loads on a small area of the seat.
(D Tips
It is not possib le to operate the rear climate
control system controls when the power chi ld
safety lock is switched on. W ith the SET REAR
funct ion, you can apply all settings to the rear
using the climate control system controls in
the cockp it~
page 38 .
Setup
Applies to: vehicles with 4 -zone de luxe automat ic climate
contro l
The climate control system basic settings are ac­
cessed in the Infotainment system.
.. Select in the Infotainment system : IMENU! but­
ton
> V eh icle > left control button > Air condi­
t ioning
Seat heating /seat ventilation *
You can adjus t the seat heat ing/vent ilat io n ba l­
an ce for t he d river, front passenger and rear pas­
sengers .
Footwell temperature
You can adjust the footwell temperature so that
i t is cooler or wa rme r.
Auto recir culat ion
When switched on, automat ic recirculation con­
trols the recirculation mode automatically . You
must press the®
MAX button if fog forms on
the w indows .
Automat ic au xili ary heater *
The aux iliary heater he lps to warm the vehicle in­
terior more qu ickly.
Steering wheel heating
App lies to: vehicles wit h stee ring w heel heat ing
The steering wheel rim can be heated .
.. Press the button on the multifunction steering
wheel to switch the steering wheel heating on .,..