battery AUDI TT 2013 Owner´s Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2013, Model line: TT, Model: AUDI TT 2013Pages: 262, PDF Size: 65.91 MB
Page 192 of 262

190 Checking and filling
If the brake fluid level falls considerably b e
l ow the "MIN" mark, the brake warning/ indi
cator light (U .S . mode ls:
1111 , Canad ian
model s:. ) will come on
c> page 14 . Do not
continue to ope ra te the vehicle. The comple te
brake system shou ld be thoroughly checked
by an author ized Audi dealer or ot her quali
fied fac ility and the cause corrected . If the
b rake fluid level is too low, the b rake war ning/
i ndicator ligh t w ill illuminate. Contact an a u
thor ized A udi dealer
immediatel y.
Changing brake fluid
Hove the broke fluid changed by on experi
enced technician.
Brake fl uid abso rbs moist ure from the a ir. If
the wate r content in the b ra ke fluid is too
h igh, cor ros ion in the br ake sys tem may result
after a per iod of t ime . The bo iling point of the
brake fluid wi ll also decrease considerab ly and
decrease braking performanc e.
Therefore, the brake fl uid mus t be changed
every tw o year s. Always use new b rake fluid
which conforms to Federal Motor Veh icle
Standard "FMVSS 1 16 DOT 4".
The brake flu id rese rvoi r can be difficul t to
r each, therefo re , we recommend that yo u
have the brake f luid changed by yo ur autho r
ized
Audi dealer. Your dea ler has the correct
too ls , the right brake f luid and the know-how
to do this for you.
A WARNING
- Brake fluid is poiso nous . It must be stor
ed only i n the closed orig inal container
o ut o f the reac h of children!
- Brake fa ilure can result from old o r inap
propriate b rake fluid . Observe these pre
caut ions :
- Use only bra ke fluid that meets SAE
specif ication
J 1 703 and co nforms to
Federal Motor Vehicle Standard 116 .
Always check with your a uthori zed Audi
dealer to ma ke sure you are using the
correct brake flu id. The correct type of brake flu
id is also ind icate d on the
brake f lu id rese rvoir.
- The brake fluid must be new. Heavy use
of the brakes can cause a vapo r lock if
the brake fluid is left in the system too
long. This can seriously affect the effi
c iency of t he brakes as well as your
safety . T his co uld resu lt in a n accide nt.
([) Note
Brake fluid will damage the paint of your
vehicle.
@ For the sake of the environment
Because o f the prob lem of proper disposal
of brake fluid as well as the spec ial too ls
required and the necessary expertise, we
recomme nd that you have the brake flu id
changed by yo ur autho rize d Aud i deale r.
Battery
General information
Your vehicle is equipped with a specia l bat
tery, an
ACM battery. This battery is located
in the luggage compartment and must be re
placed with an origina l equipment battery .
U nder normal opera ting condit ions, the bat
te ry is
maintenance-fr ee .
Have the battery checked when you take your
vehicle in for serv ice . You a re well advised to
replace a battery that is o lde r th an 5 years .
Disconnecting the battery terminals
Some vehicle functions (power window reg u
lators, for example) are lost if the battery te r
mina ls are disconnected . T hese functions have
to be relearned after the battery termina ls are
connected again . T o p revent t his, t he battery
shou ld only be disconne cted from the veh icle
elect ric a l sys tem when abso lutely ne cessary
f or rep air s.
Vehicles not driven for long periods
If you do not drive your vehicle ove r a period
of seve ral days o r weeks , e lectr ica l compo-
nents a re g radually cut back or switched off.
Ill-
Page 193 of 262

This reduces energy consumption and main
tains starting capability over a longer period
c::>
page 156. Some of the convenience func
tions may not operate, such as the interior
lights or power seat adjustment. The conven
ience functions will be ava ilable again when
you switch on the ignition and start the en
g ine .
Winte r oper ati on
During the winter months, battery capacity
tends to decrease as temperatures drop. This
i s because more power is also consumed while
start ing, and the headlights, rear window de
fogger, etc., are used more often .
Avoid unnecessary power consumption, par
ticularly in city traffic or when traveling only
short distances . Let your authorized Audi
dealer check the capac ity of the vehicle bat
tery before winte r sets inc::>
page 193. A we ll
charged ba tte ry w ill no t only prevent starting
prob lems when the weathe r is cold, but will
a lso last longer .
Replacing battery
The new battery must have the same capaci
ty, vo ltage ( 12 volts), amperage, cons truction
and p lug sealing, as the origina l ba tte ry. Spec
if ications are listed on the batte ry housing.
Batteries specially developed by A udi fulfill
the maintenance, output, and safety require
ments.
When insta lling the battery, make sure the ig
nition and all electrica l cons umers are switch
ed off c::>
(i).
We recommen d that yo u use ma intenance
free or
cy cle- re sis tant /leak-pr oof batteries
according to the standards TL 825 06 (from
April 2008) and VW 7 SO 73 (from Apri l
2010).
Replacing the batte ry should be carried by a
q ua lified workshop. P lease follow the instruc
tions on the battery cover.
Checkin g and fillin g 191
@ Note
-All work on the battery requires techni
cal know ledge. Please contact an Audi
dealership or another authorized fac ility
for questions about the battery - danger
of ac id burns and exp losion hazard!
- The battery must not be opened! Do not
try to change the battery 's liquid level,
otherwise detonating gas will escape
from the battery - explosion hazard!
- The AGM battery in the luggage com
partment cannot leak, because the elec
t ro lyte for this batte ry is abso rbed into a
special glass mat. This lea k-proof battery
must not be replace with a convent iona l
bat tery.
- Make su re the ventilation hose on t he
side of the ba ttery is connected, othe r
w ise fumes or battery ac id can leak out.
- Batte ry holder and termin als always
have to be sec ured correc tly.
- Before all work on the batte ry follow the
warning s below c::> .&. in Working on the
battery on page
192 .
@ For the sake of the environment
Because of the p rob lem of proper disposal
of a ba ttery, we recommend your author
i zed Audi dealer change the bat tery fo r
you. Batteries contain sulfuric acid and l ead and must always be disposed of prop
erly in comp liance with a ll environmental
regulat ions. Disposing of vehicle batter ies
i mproperly is very dangerous to the envi
ro nment. Make sure that the removed bat
tery cannot overbalance, othe rwise sulfu
r ic acid might escape!
@ Tips
If your vehicle is left standing for several
weeks at extremely low temperatures, the
vehicle battery shou ld be removed and
stored w here it w ill not freeze. This will
p revent it from be ing dam aged and h aving
to be replaced .
•
•
Page 194 of 262

192 Checking and filling
Working on the battery
Be especially careful when working on or near
the battery!
The battery is located in the luggage compart
ment under the floor. Before you work on or
near the battery,
read and heed all WARN
INGS ~.&. -
Always heed the safety warnings, when work
ing on the vehicle battery or the vehicle elec
tr ical system to prevent injury .
The following WARNINGS are very
important when working on the battery:
Always heed the following WARNING SYM· BOLS and safety precautions when working
on the battery.
@ Always wear eye protection .
b,. Battery acid contains sulfuric acid. Al
~ ways wear gloves and eye protection.
~~-
No
@ -sparks
-flames
-smoking.
When a battery is charged , it produces
hyd rogen gas which is explosive and
could cause personal injury.
I ~ Always keep the battery well out of
V;!J/ reach of children .
A WARNING
=
Whenever working on the battery or on
the electrical system, there is the risk of
injury, accident and even fire. Read and
heed the following WARNINGS:
- Always wear eye protection. Do not let
battery acid or any lead particles get on
your sk in or cloth ing. Sh ield your eyes.
Explosive gases can cause blindness or
other injury .
- Battery acid contains sulfur ic acid. Sulfu
ric acid can cause blindness and severe
burns.
- Always wear gloves and eye protection.
Do not tilt the battery because ac id
-
could leak out of the ventilation open
ings.
- If you get battery acid in your eyes or
on your skin, immediately rinse with cold water for several minutes and get
med ical attention.
- If you shou ld ingest any battery acid,
seek medical attention immediately.
- Do not expose the battery to an open
flame, e lectr ic sparks or an open light.
- Do not smoke .
- Do not interchange the positive and neg -
ative cables .
- When working on the battery, be sure
not to short-circuit the terminals with
too ls or othe r metal objects . This would
cause the battery to heat up very quickly,
which could lead to damage or explosion
and personal injury.
- When a battery is charged, it produces
hydrogen gas which is explosive and
could cause personal injury.
- Always keep the battery well out of the
reach of children.
- Before work is done on the electrical sys tem, disconnect the negat ive ground ca
ble.
- Before performing any work on the e lec
tr ical system, switch off the engine and
ignit ion as well as any electrical equip
ment. The negative cable on the battery
must be disconnected .
If you are just go
ing to replace a light bulb, then it is
enough to switch off the lights.
- Before disconnecting the battery, switch
off the anti-theft alarm system! Other
wise you will set off the alarm.
- When disconnecting the battery, first disconnect the negative cable and then
the positive cab le .
- Before reconnecting the battery, make
sure all electr ica l consumers are switch
ed off . Reconnect the positive cable first
and then the negative cable. Never inter
change the cables - this could start a fire!
- Never charge a frozen or a thawed-out
battery. It could exp lode! If a battery has
frozen, then it must be replaced. A
llll-
Page 195 of 262

dischar ged battery can freeze over at
32 °F (0 °C).
- Make sure the vent hose is alw ays attach
ed to the opening on the side of the bat
tery.
- Never use batteries which are damaged .
Danger of explosion! A lways rep lace a
damaged battery.
A WARNING
California Propos ition 65 Warning:
- Battery posts, terminals and related ac
cessories contain lead and lead com pounds , chemicals known to the State of
Californ ia to cause cancer and reproduc
t ive p roblems. Wash ha nds after han
dling .
CD Note
-Do not d isconnect the vehicle battery
when the ignition is switched on or when
t h e engine is running, otherwise, you will
damage e lectronic components in the
ele ctr ical sy stem.
-If your vehicle is goi ng to stand for a
l ong pe riod of time wit ho ut being d riven,
p rotec t the battery from "freezing ", o th
erwise it will be d amaged and w ill t hen
h ave to be replaced.
Checking the battery acid level on magic
eye batteries*
Th e battery acid level in the batt ery can be
checked through the clear inspection window.
F ig. 140 Lu ggag e co mpart ment : Bat te ry w it h m agi c
eye.
Checkin g and fillin g 193
On top o f the battery , there is a round "win
dow" . This window (magic eye) changes co lor
as the battery charge and ac id leve l change .
.. Read and heed all WARN INGS
c::> .&_ in
Working on the battery on page 192
.. Read the acid level from the window on the
battery c:>fig .140.
Air bubb les in the window can cause an inac
cu rate reading. Carefu lly tap on the s ide of
t h e window .
- If the window is green , the batte ry acid level
is cor rect .
- If the w indow h as
no color or is bright yel
low ,
the batte ry a cid level is too low. Have
the ba ttery tested by your authori zed Audi
dea ler or a qua lified workshop .
- If the window is black , then the ba ttery is
insufficiently charged. Recharge the battery
as soon as possib le
c::> page 193.
CD Note
Do not overfill the bat tery, otherwise b at
tery ac id will ove rflow through the vent
ope ning . This ca n damage the paint and
cause corrosion .
Charging of battery
Starting the engine requires a well charged
battery.
.. Alway s read and heed all WARNINGS be
low
c::> .&. and c::> .&. in Working on the bat
tery on page 192 .
.. Switch off the ignition and a ll electr ical con
sumers .
.. Make sure the area is well ven tilated when
you cha rge the battery .
.. Connect charger cables.
ALWAYS conne ct
charger cable s POSITIVE
G) to POSITIVE
G) ; NEGATIVE Oto NEGATIVE Q .
.. Swit ch o n the charge r .
.. Tu rn off the charger
c::> .&_ .
.. Disconnect the charger cab les.
.. Connect both battery cab les to the battery
if necessary -
first plus, then minus. II>-
Page 196 of 262

194 Checking and filling
When charging at low voltages (e.g . w ith a
tri ckle charger ), the battery cables do not
have to be d isconnected first. Be fore charging
at
high voltages, i.e. " fast charging ", you
must disconnect both cables. In e ither case,
follow the instruct ions from the ma nufacturer
of the charger .
Fastcharging a battery is
dangerous c:> .&. in
Working on the battery on page 192 .
It re
qu ires specia l charg ing equipment a nd the
k nowledge to go wi th it. We recomme nd hav
ing your battery fast charged on ly by a quali
fied workshop.
A discharged batte ry can
freeze at tempera
tures of on ly 32 °F (0
°(). A llow a frozen bat
tery to thaw completely befo re attempt ing to
cha rge it
c:> ,&. . Howeve r, we re comme nd not
usi ng a thawe d batt ery again bec ause t he bat
tery cas ing ca n be cracked d ue to ice forma
tion and can lea k bat tery aci d.
D o not open the batte ry caps whe n charg ing
the ba ttery.
_&. WARNING
-
Cha rging a batte ry can be dange rous.
- N ever charge a fro zen b att ery .
It may ex
plode beca use o f gas t rappe d in t he i ce.
Allow a frozen battery to thaw o ut first .
- D o no t reu se batte ries which we re fr o
zen . The batte ry housing m ay h ave
c rac ked an d weakened whe n the battery
froze .
- C harge the b attery in a we ll ven tilated
area . Kee p away from open flame o r elec
trical spa rk. Do not smoke. Hydrogen gas
generated by the battery is exp losive.
- To reduce the danger o f explosion, never
co nnect or disconnect charger cables
wh ile the charger is operating .
- Fast charg ing a battery is dangerous and
shou ld on ly be attempted by a compe
tent technician w ith the proper eq uip
me nt.
- Battery acid that may spill d uring charg
ing should be washed
off wit h a so lution
of warm water and baki ng soda to neu
t raliz e the aci d.
(D Note
Neve r use a fast charger as a booster to
start the eng ine. Th is w ill seriously dam
age sensit ive e lectronic components, such
as cont ro l units, re lays, radio, etc. , as well
as the battery charge r.
(D Tips
The vehicle batte ry must not be charged
with a standard small charger that plugs in to the c igarette lighter or outlet.
Windshield/headlight
washer container
Fi g. 141 Fen der, left: cove r o n th e w inds hield a nd
h ead lig ht• wa sher fl uid re se rvoir
T he was her fluid co nta iner is mar ked w it h the
symbol
Q o n its c a p<=> page 182, fig . 134.
""' Before yo u check anything in the engine
compa rtme nt,
always read and heed all
WARNINGS c:> ..&. in Wor king in the engine
c ompartment on page 18 0.
""' Lift th e fill er ca p tongue to ad d washer flu
id . You can f ill the containe r to the top .
""' Press the cap back o nto the fi ller neck after
fi lling the container.
You can find the reservo ir
capacity in t he table
in
<=> page 24 0
Clean wa ter should be used when filling up. If
poss ible, use so ft wat er to preven t sc aling o n
t h e washer jets . A lways ad d a glass clea ner
solution (with frost protection in the winter) . ..,.
Page 200 of 262

198 Tires and wheels
Groove
means the space between two adjacent tread
ribs .
Load rating (code)
means the maximum load that a tire is rated
to carry for a given inflation pressure. You
may not find this informat ion on all tires be
cause it is not req uired by law.
Maximum load rating
means the load rating for a t ire at the max i
mum permissible inflation pressure for that
tire.
Maximum loaded vehicle weight
means the sum of:
(a) Curb weight
(b) Accessory weight
(c) Vehicle capacity we ight, and
(d) Production options weight
Maximum (permissible) inflation pressure
means the maximum cold inflation pressure
to which a tire may be inflated. Also called
"maximum inflation pressure ."
Normal occupant weight
means 150 lbs. (68 kilograms) times the
number of occupants seated in the vehicle up
to the total seating capacity of your vehicle .
Occupant distribution
means distribution of occupants in a vehicle.
Outer diameter
means the overa ll diameter of an inflated new
tire.
Overall width
means the linear distance between the exteri
ors of the sidewalls of an inflated tire, includ
ing elevations due to labeling, decorations, or
protective bands o r ribs .
Ply
means a layer of rubber-coated parallel cords.
Production options weight
means the combined weight of those insta lled
regular production options weighing over 5
lb s. (2 .3 kg) in excess of those standard items
which they replace, not previously considered
in curb weight or accessory we ight, including
heavy duty brakes, ride levelers, roof rack,
heavy duty battery, and special tr im .
Radial ply tire
means a pneumat ic tire in which the ply cords
that extend to the beads are laid at substan
t ia lly 90 degrees to the center line of the
tread .
Recommended inflation pressure
see <=> page 19 7, Cold tire inflation pressure.
Reinforced tire
means a t ire designed to operate at higher
loads and at higher inflation pressures than
the cor responding standard tire. Reinf orced
ti res may be identified as "XL" , "xl", "E XTRA
LOAD", or "RF" on the sidewall.
Rim
means a metal support for a tire or a tire and
tube assembly upon which the tire beads are
seated.
Rim diameter
means nom inal diameter of the bead seat. If
you change your wheel s ize, you will have to
purchase new tires to match the new rim di
ameter.
Rim size designation
means r im diameter and width .
Rim width
means nominal distance between rim flanges.
Sidewall
means that portion of a tire between the
tread and bead.
Page 234 of 262

232 Emergency situations
Emergency situations
General
This chapter is intended for trained emer
gency crews and working personnel who
have the necessary tools and equ ipment to
perform these ope rations.
Starting by pushing or
towing
Q;) Note
Vehicle s with an automati c transmission
cannot be started by pushing or towing .
Starting with jumper
cables
If necessary, the engine can be started by
connecting it to the battery of another vehi
cle.
If the engine should fail to start because of a
discha rged or wea k batte ry, the battery can be
connected to the battery o f
another vehicle,
using a
pair of jumper cables to start the en
g ine .
Jumper cables
Use only jumper cab les of sufficiently
large cross section to safely carry the starter
cur rent. Refer to the manufacturer's specifica
ti ons.
Use on ly jumper cables which have
insulated
termina l clamps and are properly marked for
d istinction :
plus(+) cable in most cases colo red red
minu s(-) cable
in most cases colo red black .
_& WARNING
Batterie s contain elec trici ty, a cid, and ga s.
Any of th ese c an cause ve ry seri ous or f ata l
inju ry . Follow the instructions below fo r
safe han dling of your ve hicle's battery.
- Alw ays s hield yo ur eyes and avoid lean
ing over the batte ry w henever possib le . -
A discharged battery can a lready freeze
at temperatures just be low 32 °F (0 °C).
Before connect ing a jumper cab le, the
frozen battery must be thawed com
p letely, othe rwise it cou ld explode .
- Do not allow batte ry acid to contact eyes
or skin . Fl ush any contacted a rea wi th
water immediat ely .
- Imp roper use of a booster battery to
s tart a vehicle may cause an explosion.
- Vehicle batter ies generate explosive gas
es . Keep sparks, flame and lighted ciga
rettes away from ba tte ries .
- Do not try to jump start a ny ve hicle w ith
a low ac id leve l in the battery .
- The vo ltage of the booster batte ry m ust
a lso have a 12-Vo lt rat ing . The capacity
(A h) of the booster batte ry should not b e
lowe r than that of the discharged bat
tery . U se o f batt erie s of d iffe ren t voltage
or subs tanti ally diffe ren t "Ah" rat ing
may c ause an exp losion and person al in
ju ry .
- N ever ch arge a fr ozen bat te ry. Gas t rap
ped in the ice may ca use an ex plosion .
- N ever ch arge o r use a batt ery th at has
been fro zen. T he battery case may have
be weakened.
- Us e of batt erie s of di ffere nt vo lta ge or
substan tially differen t ca pa city (Ah) rat
i ng may cause an exp losion and injury.
T he capac ity (Ah) of the booster battery
should not be lower than that of the dis
charged batte ry.
- Before you check anything in the engine
compartment, always read and heed a ll
W ARNI NGS
c::;,page 174, Engine com
partment .
@ Note
-App lying a hig her voltage booster ba t
tery will cause expens ive damage to se n
sitive electronic components, such as
cont ro l units , relays, rad io, etc.
- There must be no electrical contact be
twee n the vehicles as otherwise current
cou ld already start to flow as soo n as th e
posi tive (+) term inals are connect ed. ""
Page 235 of 262

@ Tips
The discharged battery must be properly
connected to the vehicle's electrical sys
tem.
Use of jumper cables
Make sure to connect the jumper coble
clomps in exactly the order described below!
Fi g. 168 Engine compartment: Connecto rs for jumper
cables and charger
Fig. 169 Jump starting with the battery of another ve
h icle: @discharged veh icle batte ry, @ booste r battery
The procedure described below for connecting
jumper cables is intended to provide a jump
start for your veh icle.
Preparatory measures
1. Do not jump start a frozen battery! Re
place such a battery!
2 . Otherwise apply the hand brake and shift
in to idle gear if your veh icle has manua l
transmission , and put the selector lever
into P position if your vehicle has auto
matic transm ission.
3. For both vehicles switch off all consumers
and the ignition.
Emergency situations 233
Connecting/disconnecting the jumper
cable.
4. Connect one end of the red jumper cable
on the
jump start bolt (D c:> fig. 169
(Bolts under red cover= "positive") of the
vehicle to be started @.
5. Connect the other end of the red jumper
cable to the positive term inal @of the
booster battery @.
6. Connect one end of the black jumper ca
ble to the negative terminal@ of the
booster battery @.
7. Connect the other end of the black jumper
cable to the negative terminal (bolt head)
@ in the external starting point @of
your vehicle.
8. Route the jumper cables so that they can not catch in any rotat ing parts in the en
gine compartment .
Starting the engine
9. Start the engine of the vehicle providing
assistance and allow it to run at idle.
10. Now start the engine of the vehicle w ith
the d ischarged battery, wait for two to
three minutes until the engine "runs"
smoot hly.
11. If the engine does not start: Stop trying
after 10 seconds and then try again after
about 30 seconds.
12. In the vehicle that has received start as
s istance, turn on the heater blower and
the rear window heating to eliminate any
voltage peaks when disconnecting. Driv ing lights must be switched off!
13. Disconnect the cable while the eng ine is
running exactly in
reverse order to that
described inc:>
page 233, Connecting/dis
connecting the jumper coble ..
When do
ing so, make sure that the cable cannot
contact rotating engine parts.
14. C lose the cover on the positive terminal.
T he battery is vented to the outside to prevent
gases from entering the vehicle interior . Make
sure that the jumper clamps are well connect
ed with their
metal ports in full contact with
the battery term inals.
Page 236 of 262

234 Emergency sit uat ions
_& WARNING
To avo id serious per sonal injury and dam
age to the vehicle, heed all warnings and
instructions of the jumper cable manufac
turer. If in doubt, call for road serv ice.
- Jumper cables must be long enough so
that the vehicles do not touch.
- When connecting jumper cables, make
surethattheycannotgetca ughtinany
moving parts in the eng ine compart
ment.
- Before you check anything in the engine
compartment, always read and heed all
WARNINGS
c::> page 174, Engine com
partment.
(D Note
Improper hook-up of jumper cables can ru
in the generator.
- Always connect POSITIVE( +) to POSI
TIVE(+), and NEGATIVE(-) to NEGATIVE ( - ) ground post of the battery manager
control unit.
- Check that all screw plugs on the battery
ce lls are screwed in firmly. If not, tighten
plugs prior to connecting clamp on nega
tive battery terminal.
- Please note that the procedure for con
nect ing a jumper cable as described
above applies spec ifically to the case of
you r vehicle be ing jump started. When
you are giving a jump star t to a nothe r ve
hicle, do
not connect the negat ive (-) ca
ble to the negat ive (-) term inal on the
discharged battery @. Instea d, secure ly
connect the negative (-) cable to either a
solid metal component that is firmly
bo lted to the engine block or to the en
gine block itself. If the battery that is be i ng charged does not vent to the outside,
escap ing batte ry gas cou ld ign ite and ex
plode!
-
Emergency towing
with commercial tow
truck
General hints
Your Audi requires special handling for tow
ing.
T he following information is to be used by
commercial tow truck operators who know
how to operate their equipment safely.
- Ne ver tow your Audi , towing will cau se
damage to the engine and tr an smi ssion .
- Ne ver wrap th e safet y chain s or winch ca
ble s ar ound the brak e lines.
- To prevent unne ces sary damage , your Audi
must be tran sp o rt ed with a car carrier
(flatbed truck ).
- To load th e vehi cle on t o the flat bed , u se
the t owing loop found in the vehicle tool s
and attach to the front o r rear anchorage
c::> page 235 and c::> page 236.
A WARNING
--A vehicle being towed is not safe for pas
sengers. Never allow anyone to ride in a
vehicle be ing towed, for any reason.
Page 249 of 262

A
A/C operation . . . . . . . . . . . . . . . . . . . . . . . 69
Accessories . . . . . . . . . . . . . . . . . . . . . . . . 245
Acoust ic park assist . . . . . . . . . . . . . . . . . . 78
Adapt ive light .. ........... .. .. .. .... 43
defect ive . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adding Eng ine coolant .............. .... . .
E ng ine oi l .. ............. .... .. .. .
W indshield washer fl uid ... .. .. .. .. .
Addit ional accessories .... .. .. .. .. .. .
Additives Engine oil .. .... .. .... ... .. .. .. .. . 188
185
194
245
185
Ad justab le steer ing colum n .. .. .. .. .. .. 7 1
Adjusting front seats ....... .. .. .. .. .. 54
Ad justing steering co lumn ... .. .. .. .. .. 71
Ad just ing the seats ............. ... ... 55
Advanced Airbag System Chi ldren . .. ............. .... .. .. .
Components ............. .... .. .. .
Front airbags ............... ... .. .
H ow the components work together ..
Mo nitor ing . .. ........... .. .. .. .. . 131
115
113
116
1 19
Weight-sens ing mat ...... .. .. .. .. . 13 1
Airbag War ning/ indicator lights . ...... ... ... 15
Ai rbag system . . . . . . . . . . . . . . . . . 108, 127
Care . .. .. .. .. .. ........... .. .. ... 122
C hi ld restra ints ........... .... .. .. . 132
Components (front airbags) . . . . . . . . . 115
Danger of fitting a child safety seat on
the front passenger seat . . . . . . . . . . . . 110
D isposal . . . . . . . . . . . . . . . . . . . . . . . . . 122
Fr ont airbag s ............ .... .. .. .
H ow do the front a irbags wo rk? . .. .. .
H ow many airbags does my vehi cle
have? ... .. .. .. ... . .... ... .. .. .. .
Important safety instructions on the knee airbag system ....... .. .. .. .. .
Important things to know .. .. .. .. .. .
Indicator light .. ...... ... .... .. .. . 1
12
1 17
115 125
108 119
Knee airbags . . . . . . . . . . . . . . . . . . . . . . 123
Mo nitor ing .... ........... ... ... .. 119
P ASSENG ER AIR BAG OFF light .. .. .. . 119
Repa irs .. .. ............. .... .. .. .
Side airbags .. ........... .. .. .. .. .
When must the system be inspected? . 12
2
126 1 19
Inde x 247
All- wheel drive . ..... . .. .. ..... ... . .
Winter tires ... .... . ... ...... ... . .
Alloy w heels .. .. .. ................ .
Alternator lSS
211 169
refer to Generator .. . ... .... ... .. .. . 16
Anti-freeze
refer to Engine cooling system ... .. .. 187
A nti- lock b rake system
W arning/ind icator lights ........ .. .. . 18
Anti -lock braking system ............. 150
Anti-slip reg ulation
150
Ant i-theft systems
An ti- theft a la rm system ........ .. .. . 38
El ectronic immob ilizer .......... .... . 33
Ashtray .......... .. ..... ........... 62
Aste risk
What does it mean when something is marked w it h an aster isk? . . . . . . . . . . . . . . 6
A udi magnet ic r ide . . . . . . . . . . . . . . . 2 1, 78
Desc ription . . . . . . . . . . . . . . . . . . . . . . . . 78
Indicator light ..... . ... ...... ... .. . 21
Audi Se rv ice Repair Manuals and Litera-
tu re ..... .. .. .. .. .... . · · · · · · · · · · · ·
Automat ic be lt retractor .. ...... .... .
Automatic car wash
refer to Washing ... . ... .... ... .. . . 243
104
165
Automa tic transm iss ion . ......... .... . 80
D rivi ng No tes .. .. ............... .. . 82
Emergency prog ram . .. ..... ... .. .. . 85
Emergency re lease . .. .. ..... ... .. .. . 86
Ignit ion key safety lock . ..... ... .. .. . 72
K ick-down . . . . . . . . . . . . . . . . . . . . . . . . . 85
Launch Control Program .......... .. .
8S
Se lector lever lock ... ... .... ... .. .. . 81
Se lector lever positions
80
Tiptronic .. .. .. .... ... ....... ...... 84
T iptronic controls on the stee ring wheel 84
Auto Safety Hotline ................. . 98
Ave rage fuel mileage . . . . . . . . . . . . . . . . . 23
Average speed . . . . . . . . . . . . . . . . . . . . . . . 23
Avoid damaging the vehicle .... ... .. .. 160
B
Battery . . . . . . . . . . . . . . . . . . . . . . 190, 193
Charg ing . ... .... .. . .. .. ..... ... .. 193
Checking battery acid level ........ .. 193
•
•