manual transmission CHEVROLET BOLT EV 2019 Get To Know Guide

6
ELECTRONIC PRECISION SHIFT
The electronic drive unit shift lever always starts in a center position\
, represented by a dot on the shift pattern on top of the shift lever. The selected gear positi\
on illuminates in red. After shifting, the shift lever returns to the center position.
Park – Press the button on top of the lever (A) to shift into Park.
To shift out of Park, with the vehicle ON and the brake pedal applied, press and hold the shift lock button on the side of the lever (B) and select the desired gear.
Reverse – Press and hold the shift lock
button on the side of the lever (B) and move the lever forward and then left to shift into Reverse.
Neutral – Move and hold the lever forward for 1/2 second to shift into Neutr\
al.
Note: The transmission will not stay in Neutral for an extended period. It will automatically shift into Park.
Drive – Move the lever rearward to shift into Drive.
One-Pedal Driving – With the transmission in Drive, pull the lever rearward to the L (Low) position to enable “one-pedal” driving. When the accelerat\
or pedal is not applied, regenerative braking is active to help slow the vehicle. Use the brake p\
edal for additional braking or panic stops. Pull the lever rearward again to return to Drive\
.
Note: Regenerative braking features may be limited when the battery is near full charge or cold. Always use the brake pedal if you need to stop immediately.
AUTOMATED CAR WASH MODE
To place the transmission in Neutral with the vehicle running:
1. While pressing the brake pedal, open the driver’s door and then shift\
to Neutral.
2. The indicator should show N. If it does not, select Neutral again.
3. Upon returning to the vehicle, shift into Park.
ELECTRIC PARKING BRAKE
To apply the parking brake, pull up the
Parking Brake switch by the shift lever.
To release the parking brake, turn on the vehicle, press the brake pedal, and then press the switch.
See Driving and Operating in your Owner’s Manual.
A
B