stop start Citroen BERLINGO 2017 2.G Owner's Manual

2
Berlingo2VP_en_Chap00a_Sommaire_ed02-2016
Key 18
Alarm 20
Doors

21
T

ailgate 23
Rear
  roof   flap  
26
Central

  locking  
27
Instrument panel


28
Date and time


29
W

arning lamps
32
Fuel gauge


40
Coolant

40
Under-inflation
  detection  
41
Under-inflation

  detection  
with reinitialisation


43
Service

  indicator  
47
Lighting dimmer


48
Steering wheel


adjustment
 
49
Manual gearbox


49
Gear shift indicator


50
6-speed electronic


gearbox
51
Stop & Start

53
Starting and stopping


55
Hill start assist


56
Driving


recommendations
 
57Lighting

58
Wipers
61
Trip computer

63
Cruise control


64
Speed

  limiter  
67
Heating

  /  
Air
  conditioning  
manual

 
70 digital

 
72
Demisting and


defrosting
 
75
Front

  seats  
77
Rear

  bench   seat  
79
Rear seats


(5 seat version)

82
Rear seats


(7
  seat   version)  
85
Modularity

92
Front
  fittings  
94
Modutop

  roof  
97
Roof bars


102
Courtesy lamps


103
Load space cover


(5 seat version)

104
Load space cover


(7
  seat   version)  
108
Mirrors

110
Electric windows

1
12
READY TO GO
3.


18-57 SAFETY
5.
1

13-147
Exterior 5
Interior 6
left hand drive


6 right

  hand   drive  
7
Instruments and controls


8 left hand drive


8 right hand drive


10
T

echnical data - Maintenance
12
OVERVIEW
1.


4-14
General safety recommendations 113
Hazard warning lamps

1
14
Horn
114
Parking
  brake  
1
14
Parking
  sensors  
1
15
Reversing
  camera  
1
17
Anti-lock
  braking   system  
(ABS)

118
EBA


118
ASR and DSC

1
19
Grip control

120
Active

  City   Brake  
122
Seat belts


126
Airbags

129
Carrying children

133
Deactivating the passenger's front


airbag
136
Recommended seats

139
Installation

141
ISOFIX mountings

143
Recommended ISOFIX


seat
144
ISOFIXlocations
145
Child
  lock  
147
EASE OF USE and
COMFORT
4.


58-112
ECO-DRIVING
2.


15-17
Environment 15
Eco-driving 16
The "Visual search"
(visual
index) section
assists   you   in   finding   the  
controls and functions
and their associated page
numbers on the schematic
outlines

  of   the   vehicle.
Instruments and controls
left hand drive

13 right hand drive


14
Contents

8
Berlingo2VP_en_Chap01_vue-ensemble_ed02-2016
ASR-ESC 119
Parking   sensors  1 15-116
Electric mirrors

1
10
Headlamp beam height adjustment 60
Stop & Start
53-55
Cruise control

64-66
Speed

 
limiter
 
67-69
Lighting


58-60
Foglamps


59
LED daytime running lamps

59
Automatic illumination


of headlamps

59-60
INSTRUMENTS AND
CONTROLS
Dashboard, passenger
compartment   fuses  187-189
Opening the bonnet

154
Parking

  brake  
1
14Instrument panels,
screens, dials
28-29
Setting the time in

the instrument panel
29Warning lamps, indicator lamps 32-39
Indicators,
 
fuel
 
gauge
 40,
 
47-48
Lighting dimmer

48
Gear shift


indicator

50 Wipers

61-62
Automatic rain sensitive wipers

6
1
Screen wash

62, 158
T

rip computer
63
Steering

  wheel   adjustment  
49
Horn

114
Ignition switch

55
6-speed electronic


gearbox
51-52
Steering
  mounted   controls:
-

T
ouch screen tablet
206
-

 
Audio
  system  
267
Location

11
Berlingo2VP_en_Chap01_vue-ensemble_ed02-2016
Cruise control 64-66
Speed   limiter  67-69
Lighting

58-60
Foglamps
59
LED daytime running lamps
59
Automatic illumination

of headlamps
59-60
Parking
  brake  
1
14Instrument panels,
screens, dials
28-29
Setting the time in

the instrument panel
29Warning lamps, indicator lamps 32-39
Indicators,
 
fuel
 
gauge
 40,
 
47-48
Lighting dimmer

48
Gear shift


indicator

50
Steering

 
wheel
 
adjustment
 
49
Horn


114 Ignition switch

55
Wipers

61-62
Automatic rain sensitive wipers 61
Screen wash
62, 158
T
rip computer

63
Steering

 
mounted
 
controls:
-

T

ouch screen tablet

206
-

 
Audio

 
system
 
267
Deactivating the passenger's


front airbag

132, 136
ASR-ESC


1

19
Parking
 
sensors
 
1

15-116
Electric mirrors

1

10
Headlamp beam height adjustment 60
Stop & Start
53-55
6-speed electronic

gearbox

51-52
1
OVERVIEW
Location

13
Berlingo2VP_en_Chap01_vue-ensemble_ed02-2016
INSTRUMENTS AND CONTROLS
1. Lighting and direction indicator
stalk.
2.
 
Instrument
  panel   with   screen.
3.

Wipers, screenwash, trip computer
control

  stalk.
4.
 
Ignition.
5.

 
Audio
  system   controls.
6.
 
Driver's
  front   airbag,   horn.
7.

Steering wheel height and reach
adjustment.
8.


Cruise control, speed limiter

controls.
9.
 
Switch
  panel,   parking   sensors,  
headlamp

  beam   adjustment,   ESC,  
Stop

  &   Start.
10.
 
Bonnet
  release.
11 .
 Electric

  door   mirror   adjustment.
12.
 
Electric
  window   switches.
13.
 
Switch
  panel:   hazard   warning   lamps,  
central

  locking,   child   lock.
14.
 
Cigarette
  lighter.
15.
 
Heating-ventilation
  controls.
16.

Electronic gearbox controls or
Grip control

  button.
17.
 
T
ouch   screen   tabletScreen.
18.
 
USB
  port   (with   electronic   gearbox).
19.
 
USB
  port   (with   manual   gearbox).
1
OVERVIEW
Presentation

14
Berlingo2VP_en_Chap01_vue-ensemble_ed02-2016
INSTRUMENTS AND CONTROLS
1. Lighting and direction indicator
control  stalk.
2.
 
Instrument
  panel   with   screen.
3.

Wiper
, screenwash, trip computer
control
  stalk.
4.
 
Ignition
  switch.
5.
 
Audio
  system   controls.
6.
 
Driver's
  front   airbag,   horn.
7.

Steering wheel height and reach
adjustment.
8.


Cruise control, speed limiter

controls.
9.
 
Switch
  panel,   parking   sensors,  
headlamp

  beam   adjustment,   ESC,  
Stop

  &   Start,   alarm.
10.
 
Bonnet
  release   lever.
11 .
 Electric

  door   mirror   controls.
12.
 
Electric
  window   switches.
13.
 
Switch
  panel:   hazard   warning,   central  
locking,

  child   lock.
14.
 
Cigarette
  lighter.
15.
 
Heating-ventilation
  controls.
16.

Electronic gearbox controls or Grip
control

  button.
17.
 
T
ouch   screen   tablet.
18.
 
USB
  port   (with   electronic   gearbox).
19.
 
USB
  port   (with   manual   gearbox).
Presentation

18
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
This locks and unlocks the vehicle's doors,  opens   and   closes   the   fuel   filler  
cap, as well as starting and stopping
the

  engine.
KEYR EMOTE CONTROL
Unlocking
Locking
Press this button to lock all of your
  vehicle's   doors.
The
 
direction   indicators   flash   once.
If one of the doors is open or is not
closed
 
correctly,   the   central   locking   will  
not

 
work.
Deadlocking
A second press on the closed
padlock   on   the   remote   control   within  
five seconds

  after   locking   changes   the  
locking

  to   deadlocking.
This
  is   confirmed   by   fixed   lighting  
of the direction indicators for
approximately

  two   seconds.
Deadlocking
  renders   the   exterior  
and interior door opening handles
inoperative:

  do   not   leave   anyone   inside  
the

  vehicle   when   it   is   deadlocked.
If
  deadlocking   is   activated   from   inside  
the vehicle using the remote control, it
will

  change   to   normal   locking   when   the  
vehicle

  is   started.
Press
 
this
 
button
 
to
 
unlock
 
all
 of
 
your
 
vehicle's
 
doors.
The
 
direction
 
indicators
 
flash
 
twice.
Access

32
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
Instruments and controls
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
WARNING LAMPS
Warning lamp is indicatesSolution - action
STOP on, associated
with another
warning
lamp and
accompanied
by a message
in
  the   screen.major
  faults   linked   with  
the

  "Brake   fluid   level",  
"Engine oil pressure and
temperature", "Coolant
temperature", "Electronic
brake

  force   distribution"   and  
"Power steering" warning
lamps.Y

ou must stop as soon as it is safe to do
so. Park and switch off the ignition. Have it
checked by a CITROËN dealer or a qualified
workshop.
Parking
brake
/
Brake fluid
level
/ EBFDon.
that the
 parking  brake  is  applied or
  has   not   been   released   fully.Releasing the parking brake switches off the warning  lamp.
on. low
 
brake
 
fluid
 
level. Top   up   using   a   fluid   recommended   by   CITROËN.
remaining on even
though the level
is correct and
associated with the
ABS
 
warning
 
lamp.
a fault with the electronic
brake  force   distribution. You must stop as soon as it is safe to do so.
Park and switch off the ignition.
Have it checked by a CITROËN dealer or a
qualified workshop.
Engine oil
pressure and
temperature on while
driving.
low pressure or a high
temperature. Park
  and   switch   off   the   ignition   then   allow   to   cool.
Visually
  check   the   level.
Chapter
  7,   "Levels"   section.
remaining on,
even though the
level  is   correct.a major fault. Have   it   checked   by   a   CITROËN   dealer   or   a  qualified
  workshop.
Each
 
time
 
the
 
vehicle
 
is
 
started:
 
a
 
series
 
of
  warning   lamps   comes   on   applying   a   self-test   check.  
They
  go   off   almost  
immediately

.
Engine
 
running:
 
the
 
lamp
 
becomes
 
a
 
warning   if   it   remains   on   continuously   or   flashes.
This
 
initial
 
warning
 
may
 
be
 
accompanied
 
by   an   audible   signal   and   a   message   in   the   screen.
Do
 
not
 
ignore
 
these
 
warnings.

33
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
Instruments and controls
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
Warning lamp isindicatesSolution - action
Coolant
temperature
and level on with needle
in the red
zone.
an abnormal increase in
temperature.
Park
  and   switch   off   the   ignition   then   allow   to   cool.  
V

isually   check   the   level.
flashing. a
  drop   in   the   coolant   level.Chapter
  7,   "Levels"   section.
Contact
  a   CITROËN dealer   or   a   qualified  
workshop.
Service on

  temporarily. minor   faults   or   warnings.Consult
  the   alert   log   in   the   display   or   screen.
If your vehicle is equipped with a trip computer or
a
  screen:   refer   to   the   "Steering   mounted   controls"  
section

  in   Chapter   4.
Contact
  a   CITROËN   dealer   or   a   qualified  
workshop.
remaining

  on. major   faults.
Seat belt not
fastened on then
flashing.
the
  driver   and/or   front  
passenger has not fastened
their

  seat   belt.Pull
  the   strap   then   insert   the   tongue   in   the   buckle.
accompanied
by an audible
signal then
remains
  on.the vehicle is moving with
the
  driver's   and/or   front  
passenger's seat belt not
fastened.Check

  that   the   seat   belt   is   fastened   by   pulling   the  
strap.
Chapter

  5,   "Seat   belts"   section.
ECO on.
The Stop & Start
system
has put the engine in STOP
mode following a vehicle
stop
  (red   light,   traffic   jam,  
etc...).As soon as you want to move of

f, the warning
lamp goes off and the engine restarts
automatically
  in   START
 
mode.
flashes
  for   a  
few seconds,
then

  goes   off.STOP mode is temporarily
unavailable.
or
START mode has been
invoked
  automatically.Chapter
  3,   "Stop   &   Start"   section.
READY TO GO
3

53
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
STOP & START
The Stop & Start system puts the
engine temporarily on standby - ST OP
mode
  -   during   stops   in   the   traffic   (red  
lights,

  traffic   jams,   or   other...).
The engine restarts automatically -
START mode - as soon as you want to
move
  off.
The
  restart   takes   place   instantly,  
quickly

  and   silently.
Perfect for urban use, the Stop & Start
system reduces fuel consumption and
exhaust emissions as well as the noise
level
  when   stationary.
Operation
Going into engine STOP modeThe "ECO" warning lamp
comes on in the instrument
panel and the engine goes
into
  standby:
-

with a manual gearbox
, at speeds
below
  12   mph   (20   km/h),   when   you  
put the gear lever into neutral and
release the clutch pedal,
-


with a 6-speed electronic
gearbox

, at speeds below 5 mph
(8
  km/h),   when   you   press   the   brake  
pedal or put the gear lever into
position

N. If
  your   vehicle   is   fitted   with   the   system,  
a time counter calculates the sum of
the periods in ST

OP mode during a
journey.   It   rests   itself   to   zero   every   time  
the

  ignition   is   switched   on   with   the   key.
With a 6-speed electronic
gearbox, for your comfort during
parking   manoeuvres,   STOP
 
mode  
is not available for a few seconds after
coming

  out   of   reverse   gear.
STOP mode does not affect the
functionality of the vehicle, such as
braking,   power   steering,   for   example.
Never refuel with the engine in
STOP mode; you must switch off
the   ignition   with   the   key.Special cases: STOP mode
unavailable
STOP
 

mode   is   not   invoked   when:
-
the vehicle is on a steep slope
(rising or fallin

g),
-
the driver's door is open,
-

the driver's seat belt is not
fastened,
-

the vehicle has not exceeded

6   mph   (10   km/h)   since   the   last  
engine

  start   using   the   key,
-
the engine is needed to maintain
a comfortable temperature in the
passenger compartment,
-

demisting is on,
-

some special conditions (battery
charge, engine temperature,
braking

  assistance,   ambient  temperature...)
  where   the   engine  is needed to assure control of a
system.
In this case, the
"ECO"
warning
  lamp   flashes   for   a  
few

  seconds,   then   goes   off.
This operation is perfectly normal.
READY TO GO
3
Stop & Start

54
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
Going into engine START modeThe "ECO" warning lamp
goes
  off   and   the   engine   starts:
-

with a manual gearbox
, when you
fully depress the clutch pedal,
-

with a 6-speed electronic
gearbox

:
●
 
gear
  lever   in   position   A or M,
when
  you   release   the   brake  
pedal,
●

 
or
  gear   lever   in   position   N and
the
  brake   pedal   released,   when  
you move the gear lever to
position

A or M,
●
 
or
  when   you   engage   reverse  
gear

.
With a manual gearbox in STOP
mode, if a gear is engaged without
fully depressing the clutch pedal, a
warning lamp comes on or a message
is
  displayed   asking   you   to   depress   the  
clutch

  pedal   to   restart   the   engine.
Special cases: START invoked
automatically
For your safety and comfort, START is
invoked
  automatically   when:
-

you open the driver's door
,
-

you unfasten the driver's seat belt, In this case the

"ECO"
warning
  lamp   flashes   for   few  
seconds,

  then   goes   off.
This operation is perfectly normal.
Deactivation
In certain circumstances, such as the need
to maintain a comfortable temperature in
the passenger compartment, it may be
preferable
  to   deactivate   Stop   &   Start.
At any time, press the "ECO
OFF" switch to deactivate the
system.
This
 
is
 
confirmed   by   the   switch   warning  
lamp coming on accompanied by a
message

  in   the   screen.
If the system has been deactivated
in STOP mode, the engine restarts
immediately.
Reactivation
Press the "ECO OFF" switch again.
The system is active again; this is
confirmed
  by   the   switch   warning  
lamp going of

f and a message in the
instrument
  panel.
The system is reactivated
automatically at every new start
using
  the   key.
Operating fault
In the event of a malfunction
with the system, the "ECO
OFF" switch warning lamp
flashes,  then   comes   on  
continuously

.
This
  system   requires   a   specific  
battery

  with   a   special   specification  
and technology (reference
numbers available from a CITROËN
dealer

 
or
  a   qualified   workshop).
Fitting a battery not listed by
CITROËN introduces
  the   risk   of  
malfunction

  of   the   system.
have
 
it
 
checked   by   a   CITROËN   dealer  
or

 
a
 
qualified   workshop.
In the event of a fault in STOP mode,
the
 
vehicle   may   stall.  
All
  of   the   warning  
lamps in the instrument panel come
on.

 
It
 
is
 
then   necessary   to   switch   off  
the ignition and start the engine again
using

 
the
  key.
-

the speed of the vehicle exceeds
15

 
mph
 
(25
 
km/h)
 
with
 
a
 
manual
 
gearbox

 
or
 
7
 
mph
 
(11
 
km/h)
 
with
 
the 6-speed electronic gearbox
system,
-
some special conditions (battery


charge,
 
engine
 
temperature,
 
braking
 assistance,

 
ambient
 
temperature...)
 where the engine is needed to


assure
 
control
 
of
 
a
 
system.
Stop & Start