isofix CITROEN C-ELYSÉE 2014 Handbook (in English)
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2014, Model line: C-ELYSÉE, Model: CITROEN C-ELYSÉE 2014Pages: 257, PDF Size: 9.06 MB
Page 250 of 257

15
8
Child safety
Child seats recommended by CITROËN
Group 0+: from bir th to 13 kg
L1 "RÖMER Baby-Safe Plus" Installed in the rear ward facing position.
Groups 2 and 3: from 15 to 36 kg
L4 "KLIPPAN Optima"
From 22 kg (approximately 6 years), the booster is used on its own.
L5 "RÖMER KIDFIX" Can be fitted to the vehicle's ISOFIX mountings. The child is restrained by the seat belt.
CITROËN offers a range of recommended child seats which are secured using a three point seat belt .
Page 253 of 257

18
Child safety
Your vehicle has been approved in accordance with the latest ISOFIX regulations . The seats, represented below, are fitted with regulation ISOFIX mountings:
"ISOFIX" mountings
- two rings A , located between the vehicle seat back and cushion, indicated by a marking,
To secure the child seat to the TOP TETHER : - pass the child seat strap over the centre of the vehicle's seat backrest, - raise the TOP TETHER , - secure the upper strap fixing to the ring B , - tighten the upper strap.
Observe strictly the fitting instructions provided with the child seat.
For information on the possibilities for fitting ISOFIX child seats to your vehicle, refer to the table of seating positions.
- a ring B , located under a cover on the back of the top of the seat backrest, referred to as the TOP TETHER for fixing the upper strap. TOP TETHER for fixing the upper strap. TOP TETHER Its position is indicated by a marking.
The ISOFIX mountings are three rings for each seat:
The TOP TETHER is used to secure the upper strap of child seats that have one. This device limits for ward tipping of the child seat, in the event of a front impact.
This ISOFIX mounting system ensures fast, reliable and safe fitting of the child seat in your vehicle. The ISOFIX child seats are fitted with two latches which are secured easily on the two rings A . Some also have an upper strap (or top tether) which is attached to ring B .
When installing an ISOFIX child seat on the right hand rear seat, before securing the seat, first move the centre rear seat belt towards the middle of the vehicle, so as to not inter fere with the operation of the seat belt.
The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident.
Page 254 of 257

19
8
Child safety
ISOFIX child seats recommended by CITROËN and approved
for your vehicle
Follow the instructions for fitting child seats contained in their manufacturer's installation guide.
"RÖMER Baby- Safe Plus and its Baby- Safe Plus ISOFIX base" (size category: E )
Group 0+: from bir th to 13 kg
Installed "rear ward facing" using an ISOFIX base which is attached to the rings A .
The base has a support leg, adjustable for height, which sits on the vehicle's floor. This child seat can also be secured with a seat belt. In this case, only the shell is used and attached to the vehicle's seat by the three-point seat belt.
Page 255 of 257

20
Child safety
"RÖMER Duo Plus ISOFIX" (size category B1 )
Group 1: from 9 to 18 kg
Is installed only in the for ward facing position. Is attached to the anchorage rings A and the upper anchorage ring B , referred to as the Top Tether, using an upper strap. Three seat body angles: sitting, reclining, lying down.
This seat can be used on seats not equipped with ISOFIX mountings. In this case, it must be attached to the vehicle's seat using the three-point seat belt. Adjust the front seat of the vehicle so that the child's feet do not touch the backrest.
Follow the instructions for fitting child seats contained in the seat manufacturer's installation guide.
Page 256 of 257

21
8
Child safety
" Baby P2C Midi" and its ISOFIX base (size categories: D, C, A, B, B1 )
Group 1: from 9 to 18 kg
Installed "rear ward facing" using an ISOFIX base which is attached to the anchorage rings A . The base has a support leg, adjustable for height, which sits on the vehicle's floor. This child seat can also be used "for ward facing". This seat can not be secured with a seat belt. We recommend that you use the seat in the "rear ward facing" position up to the age of 3 years.
Follow the instructions for fitting child seats contained in the seat manufacturer's installation guide.
FAIR G 0/1 S and its RWF A and FWF A ISOFIX bases (size category C for the rear ward facing version, size category A for the for ward facing version)
Group 0+ and 1: from bir th to 18 kg
Installed in the rear ward facing position for children under 18 kg and for ward facing for children
between 13 and 18 kg, using its ISOFIX base, which is attached to the rings A . Use the rear ward facing ( RWF ) type A ISOFIX base or the for ward facing ( FWF ) type A ISOFIX base. 6 positions of inclination of the shell. This child seat can also be used in a for ward facing position on seating positions not equipped with ISOFIX mountings. In this case the shell of the child seat must be attached to the vehicle seat using the three-point seat belt.
Page 257 of 257

22
Child safety
Installing ISOFIX child seats
In accordance with European regulations, this table indicates the options for the installation of ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings. In the case of the universal and semi-universal ISOFIX child seats, the child seat's ISOFIX size category, determined by a letter between A and G , is indicated on the child seat next to the ISOFIX logo.
Weight of the child / indicative age
Less than 10 kg (group 0) Up to 6 months approx
Less than 10 kg (group 0) Less than 13 kg (group 0+) Up to 1 year approx
From 9 to 18 kg (group 1) From 1 to 3 years approx
Type of ISOFIX child seatInfant car seat * "rear facing""rear facing""forward facing"
ISOFIX size categor yFGCDECDABB1
Universal and semi-universal ISOFIX child seats which can be installed on the outer rear seatsXIL- SUIL- SUIUF IL- SU
I UF: seat suitable for the installation of an I sofix U niversal seat, " F or ward facing" and secured using the "Top Tether" upper strap. IL- SU: seat suitable for the installation an I sofix S emi- U niversal seat which is: - "rear facing" fitted with a "Top Tether" upper strap or a stay, - "for ward facing" fitted with a stay, For the securing of the "Top Tether" upper strap, refer to the "ISOFIX Mountings" section. X: seat which is not suitable for the installation of an ISOFIX seat of the size category indicated.
* Infant car seats and "car cots" cannot be installed on the front passenger seat.