fuse diagram CITROEN C-ELYSÉE 2017 Handbook (in English)

168
Changing a fuse
The replacement of a fuse not shown in
the tables below may cause a serious
malfunction of your vehicle. Contact a
CITROËN dealer or a qualified workshop.
If the fuse fails again soon after
replacement, have the vehicle's electrical
system checked by a
CITROËN dealer or a
qualified workshop. Good
Failed
Pliers
Before changing a fuse:
F

T

he cause of the failure must be identified
and rectified.
F

A

ll devices consuming electricity must be
switched off.
F

T

he vehicle must be immobilised with the
ignition off.
F

I

dentify the defective fuse using the
existing allocation tables and diagrams
given in the following pages.
To replace a fuse, you must:
F

U

se the special tweezers to extract the
fuse from its housing and check the
condition of its filament.
F

A

lways replace the failed fuse with a fuse
of the same rating (same colour); using a
different rating could cause faults (risk of
f i r e). Installing electrical accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your vehicle,
contact a
CITROËN dealer or a qualified
workshop.
CITROËN will not accept responsibility for
the cost incurred in repairing your vehicle
or for rectifying malfunctions resulting
from the installation of accessories
not supplied and not recommended by
CITROËN and not installed in accordance
with its instructions, in particular when
the combined consumption of all of the
additional equipment connected exceeds
10 milliamperes.
In the event of a breakdown