70Practical information
Direction indicator side
repeaters (WY 5 W amber)
Third brake lamp
(Four W 5 W bulbs) Number
plate
lamps (W 5 W)
Do not tighten the screws more than isnecessary, to avoid the risk of breaking
the lamp.
)Pass your hand under the bumper. )Remove the bulb holder turning it onequar ter of a turn. )Remove the bulb and change it.
)
Unscrew the 2 fixing screws A. )
Release the lamp unit by pushing the two
tabs Binwards. )
Disconnect the connector and the rear screen wash pipe. )
Remove the bulb holder. )
Remove the bulb and change it.
When refitting, proceed in the reverse order
and ensure that the lamp unit seal and the rear
screen wash pipe have been put back in place correctly.
)Push the repeater forwards or rearwardsand detach it by pulling towards you. )Disconnect the bulb holder and change it.