start stop button Citroen C4 2016 2.G User Guide

99
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Switching the system off
On stopping the engine
- W hile   the   control   screens   remain   on:   the  
f

unction   is   available.
-
 
P
ressing   the   REST button activates the
ventilation
  for   a   few   minutes.   Activation   of  
t

he   function   is   confirmed   by   the   display   of  
t

wo dashes in the control screens and four
air
  flow   level   indicator   lamps.
 L

ocking   the   vehicle   has   no   effect   on   this  
f

unction.
-
 
T
he   control   screens   go   off   at   the   end   of   this  
p

eriod.
 P

ressing   again   before   the   end   of   the   period  
i

nterrupts   off   the   ventilation   definitively:   the  
c

ontrol   screens   go   off   and   the   function   is  
n

o   longer   available. F

T
urn the air flow control to the
left until all of the indicator
lamps   go   off.
This   action   switches   off   the   air   conditioning   and  
th

e
 v
entilation.
Temperature
  related   comfort   is   no   longer  
a

ssured   but   a   slight   flow   of   air,   due   to   the  
m

ovement   of   the   vehicle,   can   still   be   felt.
F
 
M
odify   the   settings   (temperature,   air   flow  
o

r   air   distribution)   or   press   the   "AUTO"
button
  to   reactivate   the   system   with   the  
v

alues   set   before   it   was   switched   off.
Avoid
  prolonged   operation   in   interior  
a

ir   recirculation   mode   or   driving   for  
l

ong   periods   with   the   system   off   (risk   of  
m

isting   and   deterioration   of   air   quality).
This switch does not operate the air
conditioning,
  only   the   air   fan.
When the "REST" function is activated,
you
  cannot   modify   the   temperature,   air  
f

low   and   distribution   settings:   these   are  
c

ontrolled   automatically   according   to  
t

he
 a
mbient
 t
emperature.
This function is not available in the
STOP
  mode   of   Stop   &   Start.
3
Ease of use and comfort

100
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Front demist - defrost
These markings on the control panel indicate the control positions for rapid demisting or defrosting   of   the   windscreen   and   side   windows.
With manual air
conditioning
F Put  the   temperature,   air   flow   and   distribution c
ontrols   to   the   dedicated   marked   position.
F
 
P
ut   the   air   intake   control   to   the   "Exterior   air  
i

ntake"   position  
 
(

indicator   lamp   on   the   control   off).
F
 
S
witch   on   the   air   conditioning   by   pressing
 t

he "A /C "
 

button;   the   warning   lamp   in   the
 b

utton   comes   on.
With digital dual-zone air
conditioning
Automatic visibility programme
F Select  this   programme   to   demist   or   defrost  t
he windscreen and side windows as
quickly
  as   possible.
The
  system   automatically   manages   the   air  
c

onditioning,   air   flow   and   air   intake,   and  
p

rovides   optimum   distribution   towards   the  
w

indscreen   and   side   windows.
F

To stop the programme, press either the "visibility"  button   again   or   "AUTO", the
warning
  lamp   on   the   button   goes   off   and   the
 w

arning   lamp   on   the   "AUTO"
 
button   comes   on.
The system starts again with the values in use before it was overridden by the visibility
programme.
With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.
With
 
Stop
 
&
 
Start,
 
when
 
the
 
demisting,
 
a

ir
 
conditioning
 
and
 
air
 
flow
 
functions
 
a

re
 
activated,
 
STOP
 
mode
 
is
 
not
 
a

vailable.
Ease of use and comfort

109
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Tall version
1. Front armrest  (
see   details   on   following   pages)
2.
1

2 V accessory socket
 (

see   details   on   following   pages)
3.
Sto

rage box
4.
C

up holder / Bottle holder
5.
S

torage pocket or START/STOP button
(depending on version)
3
Ease of use and comfort

171
C4-2_en_Chap06_conduite_ed02-2015
Starting / Switching off the engine with Keyless Entry and 
S
tarting
Starting the engine
It is not necessary to place the electronic key in t
he r eader. F
B riefly press the "S TA R T/
STOP "
  button   while   maintaining  
p

ressure on the pedal until the
engine
 s

tarts.
The
  steering   column   unlocks   and   the  
e

ngine
 s
tarts.
See the advice below for Diesel
versions.
If
  this   warning   lamp   comes   on   after  
p

ressing   "START/STOP ", you should
hold
  the   brake   or   clutch   pedal   down  
u

ntil   the   warning   lamp   goes   off   and   do  
n

ot press the "START/STOP " button
again.
If
  one   of   the   starting   conditions   is   not
 m

et,   a   reminder   message   appears   in
 t

he   instrument   panel   screen.   In   some
 c

ircumstances,   it   is   necessary   to   turn
 t

he   steering   wheel   slightly   while   pressing
 t

he "START/STOP " button to assist
unlocking
  of   the   steering;   a   message
 w

arns   you   when   this   is   needed.If
  the   electronic   key   is   not   detected   in  
t

he   zone,   a   message   is   displayed.   Move  
t

he   electronic   key   into   the   zone   so   that  
t

he   engine   can   be   started.
The presence of the "Keyless Entry
and
  Starting"   electronic   key   in   the  
r

ecognition   zone   is   essential.
As
  a   safety   measure,   do   not   leave   this  
z

one   with   the   vehicle   running.In
  temperatures   below   zero  
t

he   engine   will   not   start   until  
t

he   preheater   warning   lamp  
h

as   gone   off.
F
 
P
lace   the   gear   selector   lever   P or N with
an
  automatic   gearbox,   or   neutral   with   a  
m

anual
 g
earbox.
F
 
W
ith   the   electronic   key   inside   the   vehicle,  
p

ress   the   brake   pedal   for   vehicles   with   an  
a

utomatic   gearbox,   or   fully   declutch   for  
v

ehicles   with   a   manual   gearbox.
Diesel vehicles
6
Driving

172
C4-2_en_Chap06_conduite_ed02-2015
Switching off the engine
F Immobilise  the   vehicle.
F  P lace   the   gear   selector   at   P or N with
an
  automatic   gearbox,   or   neutral   with   a  
m

anual
 g
earbox.
Do not leave your vehicle with the
electronic
  key   still   inside.
Switching
  off   the   engine   leads   to   a   loss  
o

f   braking   assistance.
If
  the   vehicle   is   not   immobilised,   the  
e

ngine   will   not   stop.
F
 
W
ith   the   electronic   key   inside  
t

he vehicle, press the " S TA R T/
STOP "
  button.
The
  engine   stops   and   the   steering  
c

olumn   locks.
Emergency starting
When the electronic key is in the recognition zone   and,   after   pressing   the   "START/STOP "
button,
  the   engine   does   not   start:
F
 
P
lace   the   gear   selector   at   P or N for
vehicles
  with   an   automatic   gearbox   or  
n

eutral   for   vehicles   with   a   manual   gearbox.F
 O pen   the   front   armrest.
F
 
R
aise   the   mat   by   its   tab   and   remove   it.
F
 
P
lace   the   electronic   key   in   the   back-up  
re

ader.
F
 
P
ress   the   brake   pedal   on   vehicles   with   an  
a

utomatic   gearbox,   or   fully   declutch   with   a  
m

anual
 g
earbox.
F

P
ress the "START/STOP "
button.
 T

he   engine   starts.
Driving

173
C4-2_en_Chap06_conduite_ed02-2015
Emergency switch-off
In the event of an emergency only, the  e ngine  c an  b e  s witched  o f  w ithout  
c

onditions.   To   do   this,   press   and   hold  
t

he " START/STOP " button for about
3
  seconds.
In
 
this
 
case   the   steering   column   locks   as   soon  
a

s
 
the
 
vehicle   stops.
Electronic key not
recognised
If the electronic key is no longer in the recognition   zone   when   driving   or   when   you  
(

later)   request   switching   off   the   engine,   a  
m

essage   is   displayed.
F

P
ress and hold the " S TA R T/
STOP " button for about
3 seconds
  if   you   want   to   force  
s

witching   off   the   engine   (note
that restar ting will not be
possible without the key ).
Ignition on position
(without starting)
With the Keyless Entry and Starting key inside t
he   vehicle,   pressing   the   "START/STOP "
button, with no action on the pedals , allows
the
  ignition   to   be   switched   on.
With
  the   ignition   on,   the   system  
a

utomatically   goes   into   energy  
e

conomy   mode   when   required   to  
m

aintain   the   state   of   charge   of   the  
b

attery.F

P
ress the "START/STOP "
button,
  the   instrument   panel  
c

omes   on   but   the   engine   does  
n

ot   start.
F
 
P
ress   the   button   again   to   switch   off   the  
i

gnition   and   so   allow   the   vehicle   to   be  
lo

cked.
6
Driving

188
C4-2_en_Chap06_conduite_ed02-2015
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-

w

ith a manual gearbox , at speeds below
12
 
m

ph  
(
20  
k
m/h),  
o
r  
v
ehicle  
s
tationary  
w
ith  
P

ureTech   130   petrol   and   BlueHDi   115   and  
1

20
 
Diesel   versions,   when   you   put   the   gear  
l

ever into neutral and release the clutch
pedal,
If your vehicle is fitted with the
system,
  a   time   counter   calculates
 t

he   sum   of   the   periods   in   STOP
 m

ode   during   a   journey.   It   resets
 i

tself   to   zero   every   time   the
 i

gnition   is   switched   on   with   the
 k

ey   or   the   "START/STOP"   button.
-

w

ith an automatic gearbox, vehicle
stationary,
  when   you   press   the   brake   pedal  
o

r
 
place   the   gear   selector   in   position   N.
Special cases: STOP mode
unavailable
STOP mode is not invoked when:
-  t he   vehicle   is   on   a   steep   slope   (up   or  
d

ow n),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   (using  
t

he   key   or   the   "START/STOP"   button),
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes   for   a   few   seconds,   then   goes  
o

f f.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,   or   other...).   The  
e

ngine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart
 
takes
 
place
 
instantly,   quickly   and   silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
Never
 
refuel
 
with
 
the
 
engine
 
in
 
STOP
 
m

ode;
 
you
 
must
 
switch
 
off
 
the
 
ignition
 
w

ith
 
the
 
key
 
or
 
the
 
"START/STOP"
 
b

utton.
STOP
 
mode
 
does
 
not
 
affect
 
the
 
f

unctionality of the vehicle, such as
braking,
 
power
 
steering,
 
for
 
example.
Driving

190
C4-2_en_Chap06_conduite_ed02-2015
Maintenance
In the event of a malfunction with the system, the "ECO OFF"   switch   warning   lamp   flashes,  
t

hen   comes   on   continuously.
have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating fault
This system requires the use of a 12 V battery of   specific   technology   and   characteristics  
(

reference   numbers   available   from   a   CITROËN  
d

ealer   or   a   qualified   workshop).
Fitting
  a   battery   not   listed   by   CITROËN would  
i

ntroduces   the   risk   of   faults   with   the   system.
Before
  doing   any   work   under   the  
b

onnet, deactivate the Stop & Start
system   to   avoid   the   risk   of   injury   related  
t

o   an   automatic   change   to   START  
m

ode.
The   Stop   &   Start   system   makes   use   of  
a

n   advanced   technology.   All   work   on  
t

his   type   of   battery   must   only   be   carried  
o

ut   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
In
 
the
 
event
 
of
 
a
 
fault
 
in
 
STOP
 
mode,
 
t

he
 
vehicle
 
may
 
stall.
 
All
 
of
 
the
 
i

nstrument
 
panel
 
warning
 
lamps
 
come
 
o

n.
Depending
 
on
 
version,
 
an
 
alert
 
m

essage
 
may
 
also
 
be
 
displayed
 
asking
 
y

ou
 
to
 
put
 
the
 
gear
 
lever
 
into
 
position
 
N
and
 
put
 
your
 
foot
 
on
 
the
 
brake
 
pedal.
It is then necessary to switch off the
ignition,
 
then
 
restart
 
the
 
engine
 
using
 
t

he
 
key
 
or
 
the
 
"START/STOP"
 
button.
Reactivation
The system is reactivated automatically a t   every   new   start   using   the   key   or   the  
"

START/STOP"   button.
Press the "ECO OFF"
  switch   again.
The
 
system   is   active   again;   this   is   confirmed  
b

y
 
the
  switch   warning   lamp   going   off   and   the  
d

isplay   of   a   message.
Driving

209
C4-2_en_Chap07_infos-pratiques_ed02-2015
Fuel
Capacity of the tank: approximately 60 litres.When the low fuel level in the
tank
  is   reached,   this   warning   lamp  
c

omes   on   in   the   instrument   panel,  
a

ccompanied   by   an   audible   warning  
a

nd   the   display   of   an   alert   message.  
W

hen   it   first   comes   on,   around
6
litres   of   fuel   remain   in   the   tank.
Low fuel level
Additions of fuel must be of at least 5 litres to be   registered   by   the   fuel   gauge.
Opening
  the   filler   cap   may   result   in   an   inrush   of  
a

ir.   This   vacuum   is   entirely   normal   and   results  
f

rom   the   sealing   of   the   fuel   system.
F

P
ress control A   until   the   automatic   opening  
o

f   the   fuel   flap   is   heard.
 T

his   control   remains   active   for   a   few  
m

inutes   after   switching   off   the   ignition.   If  
n

ecessary,   switch   the   ignition   on   again   to  
r

eactivate   it.
F
 
T
ake   care   to   select   the   pump   that   delivers  
t

he   correct   fuel   for   your   vehicle.If you are filling your tank to the top, do not
persist after the third cut- off; this could
cause your vehicle to malfunction.
F

I
ntroduce the nozzle so as to push in the
metal
  non-return   flap   B.
F
 
M
ake   sure   that   the   nozzle   is   pushed   in   as  
f

ar   as   possible   before   starting   to   refuel   (risk  
o

f   blowback).
F
 
M
aintain   this   position   while   refuelling.
F
 
P
ush   the   fuel   flap   to   close   it.
With Stop & Start, never refuel with the
system
 
in
 
STOP
 
mode;
 
you
 
must
 
switch
 
o

ff
 
the
 
ignition
 
with
 
the
 
key,
 
or
 
the
 
S

TART/STOP
 
button
 
if
 
your
 
vehicle
 
has
 
K

eyless
 
Entry
 
and
 
Starting.
Until
 
sufficient
 
fuel
 
has
 
been
 
added,
 
every
 
time
 
t

he
 
ignition
 
is
 
switched
 
on,
 
this
 
warning
 
lamp
 
a

ppears,
 
accompanied
 
by
 
an
 
audible
 
signal
 
a

nd
 
an
 
alert
 
message.
 
When
 
driving,
 
this
 
a

udible
 
signal
 
and
 
alert
 
message
 
are
 
repeated
 
w

ith
 
increasing
 
frequency,
 
as
 
the
 
level
 
drops
 
tow

ards 0 .
You
 
must
 
refuel
 
as
 
soon
 
as
 
possible
 
to
 
avoid
 
r

unning
 
out.
If
 
you
 
run
 
out
 
of
 
fuel
 
(Diesel),
 
refer
 
to
 
the
 
c

orresponding
 s

ection.
Refuelling
7
Practical information